Journal
/
Engenharia
/
Fabrication of Soft Pneumatic Network Actuators with Oblique Chambers
JoVE Journal
Engenharia
É necessária uma assinatura da JoVE para visualizar este conteúdo.  Faça login ou comece sua avaliação gratuita.
JoVE Journal Engenharia
Fabrication of Soft Pneumatic Network Actuators with Oblique Chambers

Fabrication of Soft Pneumatic Network Actuators with Oblique Chambers

DOI:
10.3791/58277-v

•

07:09 min

•

August 17, 2018

•

, , ,
1State Key Laboratory of Mechanical System and Vibration,Shanghai Jiao Tong University, 2Robotics Institute, School of Mechanical Engineering,Shanghai Jiao Tong University, 3University of Michigan-Shanghai Jiao Tong University Joint Institute,Shanghai Jiao Tong University

Capítulos

  • 00:04Título
  • 00:47Mold Production and Silicon Elastomer Preparation
  • 01:36Chamber Part Fabrication
  • 03:03Base Part Fabrication
  • 03:40Actuator Assembly and Connecting the Tubing
  • 04:45Leak Check
  • 05:11Results: Verification of the Performance of an Actuator with 30° Oblique Chambers
  • 06:07Conclusion

Summary

Tadução automática

Tadução automática

Here we present a fabrication method of soft pneumatic network actuators with oblique chambers. The actuators are capable of generating coupled bending and twisting motions, which broadens their application in soft robotics.

Tags

Soft Pneumatic Network ActuatorsOblique ChambersFabrication MethodCoupled Bending And Twisting MotionsMold DesignSilicone ElastomerPlanetary Centrifugal MixerMold Release AgentCuringSoft Robotics

Article

Embed

ADICIONAR À PLAYLIST

Usage Statistics

Vídeos Relacionados

Fabrication of Low Temperature Carbon Nanotube Vertical Interconnects Compatible with Semiconductor Technology

Fabrication Process of Silicone-based Dielectric Elastomer Actuators

Indirect Fabrication of Lattice Metals with Thin Sections Using Centrifugal Casting

A Fabrication Method for Highly Stretchable Conductors with Silver Nanowires

Free-form Light Actuators — Fabrication and Control of Actuation in Microscopic Scale

Fabrication of White Light-emitting Electrochemical Cells with Stable Emission from Exciplexes

Experimental Implementation of a New Composite Fabrication Method: Exposing Bare Fibers on the Composite Surface by the Soft Layer Method

Fabrication of Ultra-thin Color Films with Highly Absorbing Media Using Oblique Angle Deposition

A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars

Fabrication of Microscope Stage for Vertical Observation with Temperature Control Function

Read Article