This protocol describes a method for the purification of polymorphonuclear leukocytes from whole human blood and two distinct assays that quantify the cytotoxicity of Staphylococcus aureus against these important innate immune cells.
Staphylococcus aureus is capable of secreting a wide range of leukocidins that target and disrupt the membrane integrity of polymorphonuclear leukocytes (PMNs or neutrophils). This protocol describes both the purification of human PMNs and the quantification of S. aureus cytotoxicity against PMNs in three different sections. Section 1 details the isolation of PMNs and serum from human blood using density centrifugation. Section 2 tests the cytotoxicity of extracellular proteins produced by S. aureus against these purified human PMNs. Section 3 measures the cytotoxicity against human PMNs following the phagocytosis of live S. aureus. These procedures measure disruption of PMN plasma membrane integrity by S. aureus leukocidins using flow cytometry analysis of PMNs treated with propidium iodide, a DNA binding fluorophore that is cell membrane impermeable. Collectively, these methods have the advantage of rapidly testing S. aureus cytotoxicity against primary human PMNs and can be easily adapted to study other aspects of host-pathogen interactions.
Staphylococcus aureus is a Gram-positive bacterium that causes a wide spectrum of diseases in humans. This prominent pathogen produces numerous virulence factors that contribute to different aspects of infection. These include surface molecules that allow S. aureus to adhere to different types of host tissue1, extracellular proteins that interfere with the host immune response2, and an array of secreted toxins that target different types of host cells3. In this report, we describe a method that quantifies the cytotoxicity of extracellular proteins produced by S. aureus against human polymorphonuclear leukocytes (PMNs or neutrophils), primary effector cells of the host innate immune response.
PMNs are the most abundant leukocytes in mammals. These circulating immune cells are rapidly recruited to the site of host tissue insult in response to danger signals produced by resident cells or by compounds unique to invading microbes. The extracellular input from these molecules and from direct contacts with activated resident host cells during extravasation increase the activation state of PMNs in a process known as priming4,5. Primed PMNs that have reached distressed tissue then execute important innate immune responses designed to prevent the establishment of infection. These include the binding and internalization, or phagocytosis, of invading microorganisms that triggers a cascade of intracellular events cumulating in microbe destruction by a battery of potent antimicrobial compounds5.
PMNs play an essential role protecting humans from invading pathogens and are particularly important for preventing S. aureus infection4. However, this bacterium produces a wide range of virulence genes that impede different PMN functions. These include extracellular proteins that block recognition of signaling molecules, prevent adhesion to host tissue, inhibit production of antimicrobial compounds, and compromise plasma membrane integrity4. S. aureus orchestrates the temporal expression of these virulence genes through the collective input from multiple two-component sensory systems that recognize specific environmental cues. The SaeR/S two-component system is a major up-regulator of S. aureus virulence gene transcription during infection6,7,8,9,10,11. In particular, this two-component system has been shown to be critical for the production of bi-component leukocidins that specifically target human PMNs12.
This protocol is broken into three different sections. The first section describes the purification of PMNs from human blood using density gradient centrifugation using a protocol that has been adapted from methods established by Bøyum13 and Nauseef14. The second and third sections detail two different techniques to examine S. aureus cytotoxicity; one intoxicates PMNs with extracellular proteins produced by S. aureus while the other examines the ability of living bacteria to damage PMNs following phagocytosis. These procedures use propidium iodide to measure the loss of PMN plasma membrane integrity caused by S. aureus pore-forming toxins. Propidium iodide is a DNA-binding fluorophore that is normally cell membrane impermeable but can cross plasma membranes that have been disrupted by S. aureus toxins. Flow cytometry analysis allows the rapid quantification of propidium iodide-positive PMNs to measure the relative cytotoxicity of S. aureus strains. Methicillin-resistant S. aureus (MRSA) identified as pulsed-field gel electrophoresis type USA300 and an isogenic deletion mutant of saeR/S in this strain (USA300ΔsaeR/S) have been used as models to demonstrate how these procedures can quantify the cytotoxicity of S. aureus against human PMNs.
Heparinized venous blood from healthy donors was collected in accordance with protocol approved by the Institutional Review Board for Human Subjects at Montana State University. All donors provided written consent to participate in this study.
1. Purification of human polymorphonuclear leukocytes and isolation of human serum
NOTE: All reagents should be routinely checked for the presence of endotoxin using a commercially available endotoxin detection kit and should contain <25.0 pg/mL endotoxin to prevent unwanted priming of PMNs.
2. Cytotoxicity assay of S. aureus extracellular proteins against human polymorphonuclear leukocytes
3. S. aureus cytotoxicity assay against human polymorphonuclear leukocytes following phagocytosis
NOTE: Growth curves defined by the optical density at 600 nm (OD600) and concentration of bacteria must be determined empirically for the S. aureus strains to be tested before beginning this assay. Success of these experiments requires the consistent harvest of equal concentrations of each S. aureus strain tested at mid-exponential growth phase using the OD600 of sub-cultured bacteria.
We have demonstrated how the procedures described above can be used to relatively quantify the cytotoxicity of S. aureus against human PMNs using MRSA PFGE-type USA300 and an isogenic deletion mutant of saeR/S in this strain (USA300ΔsaeR/S) generated in previous studies6. PMNs isolated using the procedures described in section 1 of this protocol were stained with propidium iodide and examined using flow cytometry. Forward and side scatter plots were used to illustrate contamination of purified PMNs by monocytes or lymphocytes (Figure 1A,B) and PMN integrity was determined using propidium iodide staining (Figure 1C). The described method of human PMN purification can consistently yield 0.5 x 107 to 1 x 108 PMNs that are >98% pure and are >95% propidium iodide negative.
The cytotoxicity of extracellular proteins produced by USA300 and USA300ΔsaeR/S were tested against purified PMNs (Figure 2) following the procedures described in section 2 of this protocol. These experiments demonstrate a concentration dependent increase in the propidium iodide staining of purified PMNs following 30 min of intoxication with extracellular proteins produced by USA300 (Figure 2B). Previous studies have demonstrated that the SaeR/S two-component system is important for expression of numerous bi-component leukocidins that target human PMNs6,10,11,16. Congruent with these previous findings, very few propidium iodide-positive PMNs were detected following exposure to extracellular proteins produced by USA300ΔsaeR/S (Figure 2B). Further experiments demonstrated a steady increase in the proportion of lysed PMNs following intoxication by USA300 extracellular proteins that plateaued after approximately 30 min (Figure 2C). Minimal lysis of human PMNs was noted at all timepoints following exposure to extracellular proteins produced by USA300ΔsaeR/S. These results illustrate the utility of this assay for the relative quantification of cytotoxicity by extracellular S. aureus proteins against human PMNs.
We tested USA300 and USA300ΔsaeR/S using the S. aureus cytotoxicity assay against human PMNs following phagocytosis that is described in section 3 of this protocol (Figure 3). A concentration dependent increase in the proportion of propidium iodide positive PMNs was observed 90 min after the phagocytosis of USA300 (Figure 3A). A significant decrease was observed in the proportion of PMNs that were propidium iodide positive following the phagocytosis of USA300ΔsaeR/S (Figure 3A), supporting other results that indicate the SaeR/S two-component system is important for the cytotoxicity of S. aureus against human PMNs (Figure 2)7,11. As previously mentioned and demonstrated in Figure 3A, differences in S. aureus concentration have a pronounced impact on PMN lysis following phagocytosis. Enumeration of the USA300 and USA300ΔsaeR/S inoculum used in each of these experiments demonstrated that the contrast in cytotoxicity between these strains was not due to differences in the concentration of bacteria used (Figure 3B). These findings show how the S. aureus cytotoxicity assay against human PMNs following phagocytosis can be used to assess the ability of different S. aureus strains to compromise human PMN plasma membrane integrity.
Figure 1: Flow cytometry analysis of purified PMNs. Representative flow cytometry dot plots of (A) purified human PMNs and (B) PMNs that have been purposely contaminated with peripheral blood mononuclear cells. (C) Representative flow cytometry histogram demonstrating minimal propidium iodide staining (<1%) of purified PMNs (shaded grey) as compared to PMNs treated with 0.05% Triton X-100 (shaded red). Please click here to view a larger version of this figure.
Figure 2: Flow cytometry analysis of PMNs intoxicated with extracellular proteins produced by S. aureus. (A) Representative flow cytometry histogram of PMNs stained with propidium iodide after 30 min of incubation with media control (shaded blue), filtered USA300 supernatant at a final concentration of 1:110 (shaded grey), or 0.05% Triton X-100 (shaded red). (B) The proportion of propidium iodide positive PMNs after 30 min of incubation with different concentrations of USA300 or USA300∆saeR/S supernatants. (C) The proportion of propidium iodide positive PMNs over time following incubation with USA300 or USA300∆saeR/S supernatant at a final concentration of 1:110. Data are presented as mean ± SEM of at least 3 separate experiments with * p ≤ 0.05 and ** p ≤ 0.005 as determined by two-tailed t-test. Please click here to view a larger version of this figure.
Figure 3: Flow cytometry analysis of PMNs following phagocytosis of S. aureus. (A) The proportion of propidium iodide positive PMNs 90 min after the phagocytosis of different concentrations of USA300 or USA300∆saeR/S. (B) Concentration of opsonized S. aureus strains used for the experiments shown in panel A. Data are presented as mean ± SEM of 4 separate experiments with * p ≤ 0.01 as determined by two-tailed t-test. Please click here to view a larger version of this figure.
This protocol describes the purification of PMNs from human blood and two distinct assays that use propidium iodide for quantifying the cytotoxicity of S. aureus against these important innate immune cells. The success of these procedures will depend upon the quality of purified PMNs and the appropriate preparation of S. aureus and extracellular proteins produced by this pathogen. For the isolation of PMNs, it is important to minimize PMN activation during and after purification by using reagents free of endotoxin contamination, treating cell preparations gently, and keeping cells at the appropriate temperature. Signs that indicate activation of PMNs include clumping of cells during purification and when more than 5% of isolated cells stain positive for propidium iodide. Because of the relatively short life span of PMNs, these cells must be isolated from human blood and tested in the same day. PMNs will begin to exhibit signs of spontaneous apoptosis if left on ice for more than 3 h after purification. As mentioned earlier, it is very important that every PMN preparation is carefully evaluated using flow cytometry analysis of forward and side scatter as well as propidium iodide staining to ensure the purity and integrity of isolated cells.
The expression of bi-component leukocidins by S. aureus is responsible for the majority of compromised PMN plasma membrane integrity that is observed using the assays described in this protocol. Variation in the expression of these toxins and other pore-forming peptides, such as phenol-soluble modulins, between strains of S. aureus will produce differences in cytotoxicity against human PMNs. Significant deviations during in vitro growth between S. aureus strains will also influence expression of pore-forming toxins and subsequent cytotoxicity. In addition, the ratio of S. aureus to PMNs in phagocytosis assays has a major impact on subsequent PMN plasma membrane permeability (Figure 3A) and these experiments require the consistent harvest of equal concentrations of each S. aureus strain tested at mid-exponential growth phase using the OD600 of subcultured bacteria. Given these considerations, it is very important to define growth curves for all strains that will be examined before beginning cytotoxicity assays. We do not recommend these methods for analyzing S. aureus cytotoxicity with strains that exhibit significant growth differences in vitro.
USA300 is a virulent MRSA isolate that is known to be highly cytotoxic against human PMNs15 and the loss of SaeR/S in this strain dramatically reduces transcription of numerous bi-component leukocidins that target human PMNs6,12, making these strains ideal models for comparing cytotoxicity using the assays described. However, there is extensive genetic variation between different S. aureus isolates and the parameters detailed in these protocols may not result in substantial changes in cytotoxicity against human PMNs when testing other S. aureus strains. Tailoring the growth conditions, volumes of supernatants added, or ratio of bacteria to PMNs may be required for success with these methods using other strains of S. aureus.
The authors have nothing to disclose.
This work was supported by the U.S. National Institutes of Health Grants NIH-1R56AI135039-01A1, 1R21A128295-01, U54GM115371 as well as funds from the Montana State University Agriculture Experiment Station, and an equipment grant from Murdock Charitable Trust.
0.9% Sodium Chloride Injection, USP, 500 mL VIAFLEX Plastic Container | Baxter | 2B1323Q | PMN purification |
1.5 mL micro-centrifuge tubes with Snap Caps | VWR | 89000-044 | Used in washing cells |
1.8% Sodium Chloride Solution | Sigma-Aldrich | S5150 | PMN purification |
12x75mm Culture tubes | VWR | 60818-430 | Used as flow cytometry tubes |
20% (w/w) Dextran | Sigma-Aldrich | D8802 | PMN purification |
3125 Hand Tally Counter | Traceable Products | 3125CC | For counting cells |
50 mL conical centrifuge tubes | VWR | 89039-656 | For dispensing media |
Bacto Tryptic Soy Broth, Soybean-Casein Digest Medium | FischerScientific | 211823 | For growing cell cultures |
BD Disposable Syringes with Luer-Lok Tips, 3 mL | FischerScientific | BD 309657 | For filtering supernatants |
Bright-Line Hemocytometer | Sigma-Aldrich | Z359629 | Cell counting apparatus |
DPBS, 1x (Dulbecco's Phosphate Buffered Saline) with calcium and magnesium | Corning | 21-030-CV | Used in washing cells |
Ficoll-Paque PLUS | GE Healthcare | 17-1440-02 | PMN purification |
Fisherbrand Sterile Polystyrene Disposable Serological Pipets | FischerScientific | 13-678-11E | For aspirating liquid |
Greiner CELLSTAR 96 well plates | Millipore Sigma | M0687 | Plate for holding experimental samples |
OMICRON Syringe Filters | Omicron Scientific | SFPV13R | For filtering supernatants |
Propidium iodide | ThermoFisher Scientific | P3566 | Membrane impermeable DNA stain |
PYREX Brand 4980 Erlenmeyer Flasks | Cole-Parmer | EW-34503-24 | For growing cell cultures |
RPMI 1640, 1X without L-glutamine, phenol red | Corning | 17-105-CV | Used in resuspending cells |
Sterile Water for Irrigation, USP | Baxter | 2F7113 | PMN purification |
The Pipette Pump | Bel-Art Products | F37898 | For aspirating liquid |
Triton X-100 | Sigma-Aldrich | X100 | Membrane integrity positive control |