Summary

Quantification of Reactive Oxygen Species Using 2′,7′-Dichlorofluorescein Diacetate Probe and Flow-Cytometry in Müller Glial Cells

Published: May 13, 2022
doi:

Summary

Here, we propose a systematized, accessible, and reproducible protocol to detect cellular reactive oxygen species (ROS) using 2′,7′-dichlorofluorescein diacetate probe (DCFH-DA) in Müller glial cells (MGCs). This method quantifies total cellular ROS levels with a flow cytometer. This protocol is very easy to use, suitable, and reproducible.

Abstract

The redox balance has an important role in maintaining cellular homeostasis. The increased generation of reactive oxygen species (ROS) promotes the modification of proteins, lipids, and DNA, which finally may lead to alteration in cellular function and cell death. Therefore, it is beneficial for cells to increase their antioxidant defense in response to detrimental insults, either by activating an antioxidant pathway like Keap1/Nrf2 or by improving redox scavengers (vitamins A, C, and E, β-carotene, and polyphenols, among others). Inflammation and oxidative stress are involved in the pathogenesis and progression of retinopathies, such as diabetic retinopathy (DR) and retinopathy of prematurity (ROP). Since Müller glial cells (MGCs) play a key role in the homeostasis of neural retinal tissue, they are considered an ideal model to study these cellular protective mechanisms. In this sense, quantifying ROS levels with a reproducible and simple method is essential to assess the contribution of pathways or molecules that participate in the antioxidant cell defense mechanism. In this article, we provide a complete description of the procedures required for the measurement of ROS with DCFH-DA probe and flow cytometry in MGCs. Key steps for flow cytometry data processing with the software are provided here, so the readers will be able to measure ROS levels (geometric means of FITC) and analyze fluorescence histograms. These tools are highly helpful to evaluate not only the increase in ROS after a cellular insult but also to study the antioxidant effect of certain molecules that can provide a protective effect on the cells.

Introduction

The neural retina is a very organized tissue that presents well-defined neuronal layers. In these, neurons (ganglion, amacrine, bipolar, horizontal, and photoreceptor cells) are interconnected to each other and also with Müller glial cells (MGCs) and astrocytes, leading to adequate phototransduction and processing of visual information1,2. MGCs are known to have an important role in the maintenance of retinal homeostasis because they cross the entire retinal section and, thus, they can interact with all cell types that modulate multiple protective processes. It has been reported that MGCs have several important functions for the maintenance and survival of retinal neurons, including glycolysis to provide energy to neurons, the removal of neuronal waste, the recycling of neurotransmitters, and the release of neurotrophic factors, among others3,4,5.

On the other hand, inflammation, oxidative and nitrosative stress are involved in the pathogenesis and progression of many human diseases, including retinopathies6,7,8,9,10,11. The redox balance in cells depends on tight regulation of ROS levels. ROS are constantly generated under physiological conditions as a result of aerobic respiration mainly. The major members of the ROS family include reactive free radicals such as the superoxide anion (O2͘͘͘͘•−), hydroxyl radicals (OH), various peroxides (ROOR′), hydroperoxides (ROOH), and the no radical hydrogen peroxide (H2O2)12,13. In the last years, it has become apparent that ROS plays an important signaling role in the cells by controlling essential processes. MGCs have a strong antioxidant defense by the activation of the transcriptional nuclear factor erythroid-2-related factor 2 (Nrf2) and the subsequent expression of antioxidant proteins to eliminate the excessive production of ROS under pathological conditions14,15,16. When the cells lose their redox balance due to an exaggerated production of ROS or a defective ability to remove ROS, the accumulation of oxidative stress promotes harmful modifications in proteins, lipids, and DNA, leading to cellular stress or death. The increase of the retinal antioxidant defense system improves the resolution and prevention of retinopathies, such as ROP and RD17,18,19,20,21,22,23,24. Therefore, the measurement of ROS production in real-time is a powerful and useful tool.

There are several methods for measuring ROS production or oxidative stress in cells. Among these, 2′,7′-dichlorofluorescein diacetate (DCFH-DA) probe is one of the most widely used techniques for directly quantifying the redox state of a cell25,26,27,28. This probe is lipophilic and non-fluorescent. Diffusion of this probe across the cell membrane allows its cleavage by intracellular esterases at the two ester bonds, producing a relatively polar and cell membrane-impermeable product, 2′,7′-dichlorofluorescein (H2DCF). This non-fluorescent molecule accumulates intracellularly, and subsequent oxidation by ROS yields the highly fluorescent product DCF. The oxidation of the probe is the product of the action of multiple types of ROS (peroxynitrite, hydroxyl radicals, nitric oxide, or peroxides), which can be detected by flow cytometry or confocal microscopy (emission at 530 nm and excitation at 485 nm). The limitation of this technique is that superoxide and hydrogen peroxide do not strongly react with H2DCF25,29. In this article, we use DCFH-DA probe to measure and quantify ROS by flow cytometry. For that reason, we induce ROS production by stimulating MGCs with ROS inducer, A or B, previous to loading the cells with the fluorescent probe. In addition, we use an antioxidant compound. Finally, we show representative and reliable data obtained using this protocol.

Protocol

NOTE: For buffer compositions see Table 1.

1. Cell culture preparation

NOTE: Described here is the culture preparation of MIO-M1 cells, a spontaneously immortalized human Müller glial cell line (Moorfield's/Institute of Ophthalmology- Müller 1). Always use proper aseptic technique and work in a laminar flow hood.

  1. Prepare Dulbecco's modified Eagle's medium (DMEM) complete medium. To DMEM containing 4.5 g/L D-glucose and 110 mg/L sodium pyruvate, add 10% heat-inactivated FBS, 10 mM 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES), 2 mM L-glutamine, and 50 U/mL penicillin/streptomycin. Prepare the fresh medium, on the day the MIO-M1 cells will be thawed.
  2. Thaw the frozen MIO-M1 cells on day 1.
    1. To do this, remove the cryovial containing 5 x 105 MIO-M1 cells in FBS with 10% DMSO from liquid nitrogen storage and immediately place it into a 37 °C water bath.
      NOTE: Always wear a face mask or safety goggles, since cryovials stored in liquid nitrogen present a risk of explosion when thawed.
    2. Thaw the MIO-M1 cells rapidly (in less than 1 min) by warming the vial in the 37 °C water bath until there is just a small bit of ice left in the vial.
    3. Wipe the outside of the vial with 70% ethanol and transfer it to a laminar flow hood.
    4. Transfer the thawed cells from the vial to a sterile 15 mL tube and then add 6 mL of pre-warmed complete DMEM medium dropwise.
    5. Centrifuge the cell suspension at approximately 600 x g for 5 min. After the centrifugation, a clear supernatant and a complete pellet will be visualized. Discard the supernatant with a pipette without disturbing the cell pellet.
    6. Gently dissociate the pellet and resuspend the cells in 10 mL of complete DMEM medium. Transfer this cell suspension into a 100 mm diameter tissue culture plate and incubate the plate for approximately 2 days at 37 °C, 5% CO2.
  3. When the MIO-M1 cells become 80%-90% confluent on day 4, perform the following steps.
    1. Transfer the plate into a laminar flow hood from the incubator. Carefully remove the supernatant and wash 2x with 5 mL of sterile and pre-warmed PBS. Aspirate the PBS.
    2. Dispense 1 mL of 0.5% Trypsin-EDTA solution and incubate at 37 °C in the CO2 incubator for 3-5 min to detach the cells.
    3. Add 7 mL of the complete DMEM medium to inhibit the trypsin action. Disaggregate clustered trypsinized MGCs by slowly pipetting up and down (P1000). Collect the cell suspension in a 15 mL tube.
    4. Centrifuge at 600 x g for 5 min. Discard the supernatant. Gently resuspend the cell pellet in 2 mL of complete DMEM media. Transfer 1 mL of this cell suspension into a 100 mm plate containing 9 mL of pre-warmed complete DMEM medium.
    5. Repeat the action with another 100 mm plate. Incubate the plate for approximately 1 day at 37 °C in a 5% CO2 incubator.
  4. When both plates become 80%-90% confluent (on day 6), transfer the plate into a laminar flow hood. Follow step 1.3. to obtain a cell pellet.
  5. Gently dissociate the pellet and resuspend the cells in 5 mL of complete DMEM media. Count the MIO-M1 cells using a hemocytometer (Neubauer chamber) and trypan blue solution by following the steps below.
    1. Put the glass cover on the Neubauer chamber central area. Place the chamber on a flat surface (e.g., a table or workbench).
    2. Mix an equal volume of trypan blue stain with the cells. For instance, mix 60 µL of trypan blue with 60 µL of cells for a 1:2 dilution.
    3. From this mixture, load 10 µL with a micropipette into a Neubauer chamber.
    4. Place the loaded Neubauer chamber on the microscope stage. Then, turn on the light and adjust the brightness.
    5. Move the microscope stage to an optimal position and adjust the focus until a sharp image of the cells is obtained.
    6. Count the cells inside the four squares (subdivided in 16) located at the corner of the hemocytometer (volume: 0.1 mm3 each ).
    7. Calculate the cell concentration using the equations below.
      Concentration = (Number of cells x 10.000)/Number of squares
      Concentration = (Number of cells x 10.000)/4
      Concentration = Number of cells x 2500
      NOTE: If cell dilution is performed, the concentration obtained should be converted to the original concentration before the dilution.
      ​Concentration = (Number of cells x 2500 x 2) = (Number of cells x 5000 cells/mL)
    8. Adjust the cell suspension to 1 x 105 cells/mL in complete DMEM medium and plate 2 mL of this cell suspension into a 6-well plate (2 x 105 cells/well). Shake the plate gently to distribute the cells homogeneously. Incubate the 6-well plate overnight at 37 °C in a 5% CO2 incubator.

2. Assay conditions and controls

  1. Include the following experimental controls for each experiment:
    1. Autofluorescence control (cells without DCFH-DA probe, control for setting the flow cytometer parameters).
    2. Basal control (unstimulated cells).
    3. Positive control (cells treated with a ROS inducer, A or B).
    4. Negative control (cells treated with antioxidant compound)
    5. Sample (cells treated with antioxidant compound and ROS inducer, A or B).

3. Performing the assay

NOTE: The assay is performed on day 7. Always use proper aseptic technique and work in a laminar flow hood unless otherwise instructed.

  1. Prepare low serum DMEM. Supplement DMEM containing 4.5 g/L D-glucose and 110 mg/L sodium pyruvate with 0.5% heat-inactivated FBS,10 mM HEPES, 2 mM L-glutamine, and 50 U/mL penicillin/streptomycin. Prepare the fresh medium on the day the MIO-M1 will be treated.
  2. Transfer the 6-well plate (60%-70 % confluence) to a laminar flow hood from the incubator. Aspirate the supernatant and wash the cells 1x with PBS. Add 2 mL of the low serum DMEM per well and incubate the 6-well plate for 2 h at 37 °C, 5% CO2. This is done to starve the cells.
  3. After serum starving, treat the cells with the antioxidant compound for 6 h.
    1. Aspirate the supernatant and add 2 mL of the diluted stock to the following conditions: negative control (cells treated with antioxidant compound) and sample (cells treated with antioxidant compound and ROS inducer, A or B).
    2. Incubate the 6-well plate for 6 h at 37 °C, 5% CO2.
      NOTE: If using another antioxidant compound or ROS inhibitor, standardize the optimum time and concentration for the stimuli.
  4. After 6 h of incubation, treat the cells with ROS inducer, A or B, for 30 min.
    1. Add the stimuli to the following conditions: positive control (cells treated with a ROS inducer, A or B) and sample wells (cells treated with antioxidant compound and ROS inducer, A or B).
      NOTE: Keep the stock solutions on ice.
    2. Incubate the 6-well plate for 30 min at 37 °C, 5% CO2.
      NOTE: If using another ROS inducer, properly standardize the optimum time and concentration for the stimuli.
  5. Load the cells with the DCFH-DA probe.
    1. Aspirate the supernatant and wash the cells in the 6-well plate 3x with PBS to remove all the stimuli.
    2. Turn off the light of the laminar flow hood and work in the dark. Prepare a dilution of 1:1000 of the 5 mM DCFH-DA probe stock solution to obtain a final concentration of 5 µM DCFH-DA in DMEM without phenol red in a 15 mL tube.
    3. Mix gently using a vortex and add 1 mL of this solution to the following wells: basal control (unstimulated cells), positive control (cells treated with a ROS inducer), negative control (cells treated with antioxidant compound), and sample wells (cells treated with antioxidant compound, and ROS inducer, A or B).
    4. Add 1 mL of DMEM without phenol red to the autofluorescence control cells.
    5. Incubate the 6-well plate for 30 min at 37 °C, 5% CO2.
      ​NOTE: The probe is light sensitive. Discard all the unused probe solution.

4. Cell preparation for flow cytometry

  1. After 6 h, keep the plate on ice. From this step onward, it is not necessary to use proper aseptic technique and work in a laminar flow hood.
  2. Wash the cells 3x with 2 mL of cold PBS per well. Add 0.5 mL of cold detaching buffer to each well. Harvest the cells by gently pipetting up and down using a P1000 pipette.
  3. Collect them in labeled 1.5 mL tubes and centrifuge at 600 x g for 5 min at 4 °C.
    NOTE: When harvesting the cells, avoid bubble formation by setting the P1000 pipette to 0.4 mL. From this step onward, work fast.
  4. When centrifugation ends, put labeled 1.5 mL tubes with the cells on ice. Discard the supernatant carefully and gently dissociate the cell pellet with tapping.
  5. Add 1 mL of FACS buffer to each labeled 1.5 mL tube to wash the cells. If necessary, use a vortex at its lowest intensity for the complete dissociation of the cell pellet. Centrifuge them at 600 x g for 5 min at 4 °C. Repeat these steps 2x more. (Perform three washes in total).
  6. When the last wash ends, label 5 mL round-bottom polystyrene tubes (flow cytometry tubes) for all experimental conditions (see step 2.).
  7. When centrifugation ends, resuspend the cell pellets in 200 µL of FACS buffer. Gently dissociate the pellet in each 1.5 mL tube by using a vortex. Transfer to labeled 5 mL round-bottom tubes. Keep the tubes on ice until they are analyzed on the flow cytometer.

5. Data acquisition in a flow cytometer

  1. Using the flow cytometry software, create a new experiment. To do this, in the Menu bar go to Experiment and click New Experiment (Ctrl+E).
  2. Also, in the Menu bar, go to View and click the following options: Toolbar, Status bar, Browser, Cytometer, Inspector, Worksheet, Acquisition Dashboard and Biexponential Editor to see these windows in the workspace.
  3. On the left of the software, click the Specimen_001 . This will open a list of tubes (Tube_001, Tube_002, etc.). To label the tubes for the controls and different experimental conditions, double-click Tube_001, Tube_002, etc. and rename them (see step 2.).
  4. Select the channels/parameters to be analyzed (FSC, SSC, FITC, and APC or any other fluorochrome to see the quadrant) in the first tube from Cytometer settings of the experiment.
  5. Click the Current Tube Pointer icon to select the tube, and the icon will change to green. Place the "autofluorescence control" tube on the aspirator arm, moving the base carefully only to the left.
    1. To run the "autofluorescence control" sample, go to the Acquisition Dashboard window and click Acquire Data. Open a dot plot for FSC (on the x-axis) versus SSC (on the y-axis).
    2. Adjust forward and side scatter voltage quickly in order to ensure that the events appear on the graph. In the Acquisition Dashboard window click Stop Acquiring. In this experiment, the following voltage settings were used: FSC – 200 V, SSC – 423 V.
  6. To set the FITC voltage, run the "positive control (cells treated with a ROS inducer, A or B)". Adjust the voltage so that all the events appear on a histogram of FITC. In this case, use a voltage of 280 V. In the Acquisition Dashboard window, click Stop Acquiring.
  7. Place again the "autofluorescence control" tube on the aspirator arm. In the Acquisition Dashboard window, click Acquire Data, then Record Data, and select the desired stop conditions (for example, 50,000 events). Draw a gate around the cells of interest, excluding dead cells and debris.
    NOTE: These are observed as much smaller events than the main cell population and appear on the lower left of the plot.
  8. When the acquisition ends, remove the tube from the aspirator arm. The equipment will wash itself. In the Acquisition Dashboard window, click Next Tube and run the Basal control (unstimulated cells). Click Acquire Data and then Record Data.
    1. From the initial gate (gate that excludes the dead cells and debris), create another dot plot of FITC (on the x-axis) versus APC (on the y-axis). Draw a quadrant gate and adjust the coordinates in order to visualize the events on the lower left quadrant of the FITC versus APC plot.
  9. For recording the next samples, remove the tube and click Next tube > Acquire Data > Record Data.
    NOTE: The flow cytometer used here (see Table of Materials) records a maximum of 1 x 106 events per tube.
  10. When the recording of all tubes ends, export the data to disk D. To do this click File > Export > FCS files > Select 3.0 or 3.1 version.
    NOTE: Although data acquisition using one software (see Table of Materials) is described in detail in this protocol, any other flow cytometry software can be used. The acquisition parameters (FSC, SSC, and FITC) can be set in the same way to obtain the results.

6. Analysis of the acquired data

  1. Open the software and add the samples using the Add Samples action button; it is located on the taskbar or in the Navigate band.
    1. Click Add Samples.
    2. Using the file browser, navigate to the Experimental folder.
    3. Select the Experimental folder and click Choose.
      NOTE: The sample files load as part of the "All Samples" group into the workspace.
  2. Double-click the first sample in the workspace: Autofluorescence Control.
    NOTE: This action opens a Graph window plotting events along forward scatter (FSC-A on the x-axis) versus side scatter (SSC-A on the y-axis) parameters.
  3. Draw a polygon gate to isolate the cells of interest, excluding dead cells and debris.
    1. Click the Polygon Gate tool.
    2. Click within the plot to make up the polygon gate. Make as many sides as needed.
    3. Double-click at the last point to close the polygon and create the gate desired.
    4. Provide a name for the gate, such as "MIO-M1 cells", and press OK.
      ​NOTE: A new graph plot window appears displaying only the MIO-M1 events without dead cells and debris.
    5. Repeat with all the samples to analyze.
  4. Change the plot to a histogram. To do so, click the X axis parameter label and select FITC-A. Click the Y axis parameter label and select Histogram. This changes the plot to a one-dimensional histogram.
  5. Add Statistics using the Add Statistic Window.
    1. Below of histogram graph, click Add Statistics. The program will open a new statistic window.
    2. On the left of the new window select the statistics Geometric Mean.
    3. Select the Population MIO-M 1 cells.
    4. From the list of available parameters, select FIT-C.
    5. Click the Add button to apply them to the analysis.
      NOTE: This creates the new statistics "geometric mean: FITC" in the sample gating tree, and their values are displayed in your workspace.
  6. Put these geometric mean values in a statistics program and analyze.
  7. Click the L icon to open the Layout Editor; this icon is in Menu tab on the workspace. Position the Workspace window and Layout Editor side-by-side.
    NOTE: The Layout Editor is a separated workspace window with tools for displaying multiple graph plots and statistics in a simple graphical report. This can be exported with the extension file you prefer, like PDF or JPG, among others.
    1. From the gating tree of a sample in the Workspace window, drag MIO-M 1 cells population into the Layout Editor.
    2. Ensure that a histogram graph containing the events in the gate is displayed in the Layout Editor. Additional basic information will be detailed in a text box below.
    3. Drag all the samples to compare them in the same graph. The program will overlap them.
    4. Right-click the histogram graph and select Properties. The program will open a new Graph Definition window. This window has four tabs (Annotate, Fonts, Legend, and Specify). Click the Specify tab and change the y-axis from Auto to Modal. Click Apply.
    5. Right-click the sample and change Coloring, Line Style, Line Weight, etc. to personalize the graph.
    6. To export the image, click the File tab and, immediately after, select Save Image in the Document band. Choose the preferred type of image file (e.g., PDF).
      NOTE: A save dialog box opens, prompting you to select a save location. Click Save.
  8. Save the analysis as a workspace (.wsp) File.
    1. On the top-left corner, click the Cytometry Analysis icon and select Save As.
    2. Choose Save as Workspace (WSP) to save the document with data and analysis.
    3. Enter a name for the workspace file.
    4. Click Save.

Representative Results

As described in the protocol section, we have shown representative and quantitative data demonstrating flow cytometry detection of ROS production with the fluorescence probe DCFH-DA from MIO-M1 cells stimulated with ROS inducer, A or B. As expected, we observed changes in FITC fluorescence in unstimulated cells above autofluorescence levels (Figure 1A, compare "basal control" vs. "autofluorescence control", dot plots graph). This occurred due to a basal production of ROS in the MIO-M1 cells. (Figure 1B, compare "basal control" vs. "autofluorescence control", histogram graph).

Interestingly, a significant increase in FITC fluorescence was observed when the cells were stimulated with ROS inducer, A or B (Figure 1B, compare "ROS inducer A" samples vs. "basal control" and "ROS inducer B" samples vs. "basal control", histogram graph). Moreover, when cells were treated with the antioxidant compound prior to ROS inducer, A or B, the fluorescence level was diminished near to basal levels (Figure 1B, compare "ROS inducer A" vs. "pretreatment with antioxidant compound 6 h + ROS inducer A 30 min", and "ROS inducer B" vs. "pretreatment with antioxidant compound 6 h + ROS inducer B 30 min", respectively, histogram graph). Of note, no differences in fluorescence signal were observed in cells treated with antioxidant compound (6 h) with respect to basal control. (Figure 1B, compare "6h antioxidant compound" vs. "basal control").

These results were also clearly evident when data were presented as the geometric mean of FITC (Figure 1C). As can be seen in the graph, the average values and the corresponding standard error of the mean (SEM) are indicated.

A key advantage of this protocol is its application to follow changes in ROS over time. In this regard, we have been able to observe a significant and time-dependent increase in ROS when we treated MIO-M1 cells with ROS inducer C for 2 h, 4 h, and 6 h (Figure 2).

For optimization of this protocol, we have attempted three different strategies to harvest the cells (0.5% trypsin-EDTA, Accutase cell detachment solution, and detaching buffer) with comparable results (data not shown).

Figure 1
Figure 1: Measurement of ROS in response to ROS inducer, A or B, using DCFH-DA probe in MIO-M1 cells: (A) Comparison of "basal control" vs. "autofluorescence control" conditions, representative dot plot FL1 (519 nm) vs. FL2 (660 nm). (B) Representative histograms for the fluorescence induced by DCFH-DA probe upon stimulation of MIO-M1 cells with ROS inducer, A or B, for 30 min, or pretreated with antioxidant compound for 6 h and 30 min of ROS inducer A, B, or vehicle. (C) Geometric mean of the FITC fluorescence for all the stimuli in MIO-M1 cells. Data are presented as mean ± SEM and analyzed by one-way ANOVA followed by Dunnett's post-test; **p < 0.01, ***p < 0.001. Please click here to view a larger version of this figure.

Figure 2
Figure 2: Measurement of ROS overtime in response to ROS inducer C treatment using DCFH-DA probe in MIO-M1 cells: MIO-M1 cells treated with ROS inducer C for 2 h, 4 h, and 6 h and loaded with DCFH-DA probe to determine ROS levels. Representative histogram for fluorescence intensity induced by DCFH-DA probe upon stimulation of MIO-M1 cells with ROS inducer C for 2 h, 4 h, and 6 h. Geometric mean of FITC fluorescence for the stimuli detailed above. Data are presented as mean ± SEM and analyzed by one-way ANOVA followed by Dunnett's post-test; ns, not significant, **p < 0.01, ***p < 0.001. Please click here to view a larger version of this figure.

Solution Storage conditions Note
Sodium Hydroxide (NaOH) 10 M, 1 L 400 g NaOH pellets distilled water to 1 L RT “CAUTION”: The preparation of a concentrated NaOH solution cause an exothermic reaction. Extreme caution must be taken to avoid chemical burns and breakage of glass beakers. If possible, use heavy plastic beakers.
Phosphate-Buffered Saline (PBS) 10 X, 1 L 80 g NaCl distilled water to 1 L RT Adjust pH to 7.4 and filter the solution.
2 g KCl
11.5 g Na2HPO4· 7H2O
2 g KH2PO4
Ethylenediamine Tetraacetic Acid (EDTA), 0.5 M    pH 8.0, 1 L 186.1 g Na2EDTA· 2H2O distilled water to 1 L RT The disodium salt of EDTA is not soluble in neutral water or solution until the pH of the solution is adjusted to approximately 8.0 by the addition of NaOH. Adjust pH to 8.0 and sterilize the solution.
10% w/v Sodium Azide (NaN3), 100 mL 10 g NaN3 distilled water to 100 mL RT
Detaching Buffer, 100 mL 180 mg glucose PBS 1X to 100 mL 4 °C
0.6 mL 0.5 M pH 8.0 EDTA
Flow Cytometry Staining Buffer (FACS Buffer), 100 mL 2 mL fetal bovine serum (FBS) PBS 1X to 100 mL 4 °C NaN3 is added as a preservative.
1 mL 0.5 M pH 8.0 EDTA
1 mL 10% w/v sodium azide
5 mM 2′,7′-DCFH-DA, 1 mL 2.4 mg DCFH-DA dimethyl sulfoxide to 1 mL -20 °C protected from light Mix gently and aliquot 20 μL in 1.5 mL tubes. Avoid multiple thaw/freeze cycles. Our recommendation is discarding all unused probe solution from the experimental day.
0.4% w/v trypan blue 10 X, 50 mL 0.2 g trypan blue PBS 1X to 50 mL 4 °C

Table 1: Buffer recipes

Discussion

Several pathological conditions, such as cancer, inflammatory diseases, ischemia/reperfusion, ischemic heart disease, diabetes, and retinopathies, and also physiological situations like aging, lead to ROS overproduction6,7,8,9,10,11. Therefore, the detection, measurement, and understanding of the pathway involved in the modulation of ROS are important targets for many diseases. The use of probes to measure ROS levels, like DCFH-DA, is accessible, widely described, and accepted in the scientific literature26,27,28. In this article, we describe a detailed and reproducible protocol to measure and quantify ROS levels by flow cytometry in MGCs.

An advantage of the use of this method is that, once the DCFH-DA probe is oxidized by ROS and generates a fluorescent DCF product; this can be measured in a plate reader, confocal microscope, or flow cytometer. The disadvantage of the plate reader is that it measures total fluorescence. Consequently, the plate reader does not distinguish the intracellular fluorescence from the extracellular one generated by chemical reactions in the culture medium. Confocal microscopy is a useful tool because cells can be loaded with DCFH-DA probe and viewed in real-time in culture chambers at 37°C. The morphology and location of ROS in the cell can be detected with this methodology, but ROS levels lack a quantitative measurement. The strength of flow cytometry lies in its ability to measure the intracellular fluorescence in live cells. Quantitative data on the number of cells emitting fluorescence, as well as the geometric means of fluorescence, can be obtained25.

It is important to take into account what is actually measured when using DCFH-DA probe. As we previously mentioned, DCFH-DA measures multiple ROS species, and so fluorescence resulting from the green probe cannot be used to discriminate between types of ROS species29. In this regard, it is known that different probes can discern the type of ROS. For example, dihydroethidium (DHE) probe is oxidized by superoxide to yield the fluorescent product 2-hydroxyethidium (excitation at 518 nm and emission at 605 nm), but this product cannot be distinguished without the use of more time-consuming techniques, such as HPLC30,31. Another probe is a mitochondrial superoxide indicator (see Table of Materials), which is a novel fluorogenic probe for highly selective detection of superoxide in the mitochondria of living cells31,32. However, for the purposes of the measurement of total ROS levels and increases in ROS after an insult or the evaluation of the antioxidant ability of different products, the use of DCFH-DA probe alongside the appropriate controls is convenient and acceptable25,28,29.

A very important issue is the selection and use of proper experimental controls: autofluorescence control (cells without DCFH-DA probe), basal control (unstimulated cells), positive control (cells treated with a ROS inducer), negative control (cells treated with antioxidant compound), and sample problem (cells treated with antioxidant compound and ROS inducer). A useful tip is to use medium without phenol red to reduce interference with fluorescent probes.

We also recommend loading cells with the DCFH-DA probe 30 min before finishing the experimental treatment. Standardization of the concentration of DCFH-DA, in our case 5 µM, is convenient and could differ depending on the cell type and the cell activation status. Our advice is to set up the probe concentrations, starting from 5µM and 10 µM, and check the efficacy of the staining in the experiments.

In summary, analyzing redox balance in health or disease is pivotal to establish reliable methods to measure the oxidative stress response. Therefore, this protocol is a simple, fast, and powerful tool to quantify ROS levels in live MGCs by flow cytometry.

Disclosures

The authors have nothing to disclose.

Acknowledgements

The authors would like to thank María Pilar Crespo and Paula Alejandra Abadie of CIBICI (Centro de Investigaciones en Bioquímica Clínica e Inmunología, CONICET-UNC, Córdoba, Argentina) for assistance in flow cytometry and Gabriela Furlan and Noelia Maldonado for cell culture assistance. We also thank Victor Diaz (Pro-Secretary of Institutional Communication of FCQ) for the video production and editing.

This article was funded by grants from Secretaría de Ciencia y Tecnología, Universidad Nacional de Córdoba (SECyT-UNC) Consolidar 2018-2021, Fondo para la Investigación Científica y Tecnológica (FONCyT), and Proyecto de Investigación en Ciencia y Tecnología (PICT) 2015 N° 1314 (all to M.C.S.).

Materials

2′,7′-DCFH-DA Sigma 35845-1G
4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES) Gibco by life technologies 15630-080
BD FACSCanto II flow cytometer BD Biosciences FACSCanto
BD FACSDiva software BD Biosciences
Cell Culture Dishes 100×20 mm Cell Star- Greiner Bio-One 664 160
Centrifuge Thermo Sorvall legend micro 17 R
Centrifuge Tubes (15 ml) BIOFIL CFT011150
Centrifuge Tubes (50 ml) BIOFIL CFT011500
Cryovial CRYO.S – Greiner Bio-One 126263
Dimethyl Sulfoxide Sigma-Aldrich W387520-1KG
Disodium-hydrogen-phosphate heptahydrate Merck 106575
DMEM without phenol red Gibco by life technologies 31053-028
Dulbecco’s modified Eagle’s medium (DMEM) Gibco by life technologies 11995065
Ethylenediamine Tetraacetic Acid (EDTA), Disodium Salt, Dihydrate Merck 324503
Fetal Bovine Serum Internegocios
FlowJo v10 Software BD Biosciences
Glucose Merck 108337
hemocytometer, Neubauer chamber BOECO,Germany
Laminar flow hood ESCO AC2-6E8
L-glutamine (GlutaMAX) Gibco by life technologies A12860-01
MitoSOX Red Invitrogen  M36008
Penicillin/Streptomycin Gibco by life technologies 15140-122
Potassium Chloride Merck 104936
Potassium-dihydrogen phosphate Merck 4878
Round polystyrene tubes 5 ml (flow cytometry tubes) Falcon – Corning BD-352008
Sodium Azide Merck 822335
Sodium Chloride Merck 106404
Sodium Hydroxide Merck 106462
SPINWIN Micro Centrifuge Tube 1.5 ml Tarson 500010-N
Tissue Culture Plate 6 well BIOFIL TCP011006
Trypan Blue Merck 111732
Trypsin-EDTA 0.5% 10X Gibco by life technologies 15400-054
Vortex Mixer Labnet International, Inc.

References

  1. Hoon, M., Okawa, H., Della Santina, L., Wong, R. O. L. Functional architecture of the retina: Development and disease. Progress in Retinal and Eye Research. 42, 44-84 (2014).
  2. Cowan, C. S., et al. Cell types of the human retina and its organoids at single-cell resolution. Cell. 182 (6), 1623-1640 (2020).
  3. Subirada, P. V., et al. A journey into the retina: Müller glia commanding survival and death. European Journal of Neuroscience. 47 (12), 1429-1443 (2018).
  4. Coughlin, B. A., Feenstra, D. J., Mohr, S. Müller cells and diabetic retinopathy. Vision Research. 139, 93-100 (2017).
  5. Goldman, D. Müller glial cell reprogramming and retina regeneration. Nature Reviews Neurosciences. 15 (7), 431-442 (2014).
  6. Kamalden, T. A., et al. Exosomal microRNA-15a transfer from the pancreas augments diabetic complications by inducing oxidative stress. Antioxidation Redox Signaling. 27 (13), 913-930 (2017).
  7. Feng, Y., et al. Transcription of inflammatory cytokine TNFα is upregulated in retinal angiogenesis under hyperoxia. Cell Physiology and Biochemistry. 39 (2), 573-583 (2016).
  8. Rojas, M., et al. NOX2-induced activation of arginase and diabetes-induced retinal endothelial cell senescence. Antioxidants. 6 (2), 43 (2017).
  9. Sennlaub, F., Courtois, Y., Goureau, O. Inducible nitric oxide synthase mediates retinal apoptosis in ischemic proliferative retinopathy. Journal of Neuroscience. 22 (10), 3987-3993 (2002).
  10. Wilkinson-Berka, J. L., et al. NADPH oxidase, NOX1, mediates vascular injury in ischemic retinopathy. Antioxidation and Redox Signaling. 20 (17), 2726-2740 (2014).
  11. Wang, H., Zhang, S. X., Hartnett, M. E. Signaling pathways triggered by oxidative stress that mediate features of severe retinopathy of prematurity. JAMA Ophthalmology. 131 (1), 80-85 (2013).
  12. Sies, H. Oxidative stress: a concept in redox biology and medicine. Redox Biology. 4, 180-183 (2015).
  13. Zorov, D. B., Juhaszova, M., Sollott, S. J. Mitochondrial reactive oxygen species (ROS) and ROS-induced ROS release. Physiological Reviews. 94 (3), 909-950 (2014).
  14. Navneet, S., et al. Excess homocysteine upregulates the NRF2-antioxidant pathway in retinal Müller glial cells. Experiments in Eye Research. 178, 228-237 (2019).
  15. Navneet, S., et al. Hyperhomocysteinemia-induced death of retinal ganglion cells: The role of Müller glial cells and NRF2. Redox Biology. 24, 101199 (2019).
  16. Wang, J., et al. Sigma 1 receptor regulates the oxidative stress response in primary retinal Müller glial cells via NRF2 signaling and system xc(-), the Na(+)-independent glutamate-cystine exchanger. Free Radical Biology and Medicine. 86, 25-36 (2015).
  17. Nakamura, S., et al. Nrf2 activator RS9 suppresses pathological ocular angiogenesis and hyperpermeability. Investigative Ophthalmology and Visual Science. 60 (6), 1943-1952 (2019).
  18. Xu, Z., et al. NRF2 plays a protective role in diabetic retinopathy in mice. Diabetologia. 57 (1), 204-213 (2014).
  19. Chen, W. J., et al. Nrf2 protects photoreceptor cells from photo-oxidative stress induced by blue light. Experiments in Eye Research. 154, 151-158 (2017).
  20. Wei, Y., et al. Nrf2 in ischemic neurons promotes retinal vascular regeneration through regulation of semaphorin 6A. Proceedings of the National Academy of Science of the United States of America. 112 (50), 6927-6936 (2015).
  21. Wei, Y., et al. Nrf2 has a protective role against neuronal and capillary degeneration in retinal ischemia-reperfusion injury. Free Radical Biology and Medicine. 51 (1), 216-224 (2011).
  22. Wei, Y., et al. Nrf2 acts cell-autonomously in endothelium to regulate tip cell formation and vascular branching. Proceedings of the National Academy of Science of the United States of America. 110 (41), 3910-3918 (2013).
  23. Wei, Y., Gong, J., Xu, Z., Duh, E. J. Nrf2 promotes reparative angiogenesis through regulation of NADPH oxidase-2 in oxygen-induced retinopathy. Free Radical Biology and Medicine. 99, 234-243 (2016).
  24. Xu, Z., et al. Neuroprotective role of Nrf2 for retinal ganglion cells in ischemia-reperfusion. Journal of Neurochemistry. 133 (2), 233-241 (2015).
  25. Armstrong, D. Advanced protocols in oxidative stress III. Methods in Molecular Biology. 1208, (2015).
  26. Shehat, M. G., Tigno-Aranjuez, J. Flow cytometric measurement of ROS production in macrophages in response to FcγR cross-linking. Journal of Visualized Experiments. (145), e59167 (2019).
  27. Wu, D., Yotnda, P. Production and detection of reactive oxygen species (ROS) in cancers. Journal of Visualized Experiments. (57), e3357 (2011).
  28. Halliwell, B., Whiteman, M. Measuring reactive species and oxidative damage in vivo and in cell culture: how should you do it and what do the results mean. British Journal of Pharmacology. 142 (2), 231-255 (2004).
  29. Kalyanaraman, B., et al. Measuring reactive oxygen and nitrogen species with fluorescent probes: challenges and limitations. Free Radical Biology and Medicine. 52 (1), 1-6 (2012).
  30. Fernandes, D. C. Analysis of DHE-derived oxidation products by HPLC in the assessment of superoxide production and NADPH oxidase activity in vascular systems. American Journal of Physiology and Cell Physiology. 292 (1), 413-422 (2007).
  31. Zielonka, J., Kalyanaraman, B. Hydroethidine- and MitoSOX-derived red fluorescence is not a reliable indicator of intracellular superoxide formation: another inconvenient truth. Free Radical Biology and Medicine. 48 (8), 983-1001 (2010).
  32. Roelofs, B. A., Ge, S. X., Studlack, P. E., Polster, B. M. Low micromolar concentrations of the superoxide probe MitoSOX uncouple neural mitochondria and inhibit complex IV. Free Radical Biology and Medicine. 86, 250-258 (2015).

Play Video

Cite This Article
Vaglienti, M. V., Subirada, P. V., Barcelona, P. F., Bonacci, G., Sanchez, M. C. Quantification of Reactive Oxygen Species Using 2′,7′-Dichlorofluorescein Diacetate Probe and Flow-Cytometry in Müller Glial Cells. J. Vis. Exp. (183), e63337, doi:10.3791/63337 (2022).

View Video