Journal
/
공학
/
Assembly and Characterization of an External Driver for the Generation of Sub-Kilohertz Oscillatory Flow in Microchannels
JoVE 신문
공학
JoVE 비디오를 활용하시려면 도서관을 통한 기관 구독이 필요합니다.  전체 비디오를 보시려면 로그인하거나 무료 트라이얼을 시작하세요.
JoVE 신문 공학
Assembly and Characterization of an External Driver for the Generation of Sub-Kilohertz Oscillatory Flow in Microchannels

Assembly and Characterization of an External Driver for the Generation of Sub-Kilohertz Oscillatory Flow in Microchannels

DOI:
10.3791/63294-v

•

08:32 min

•

January 28, 2022

•

,
1Department of Mechanical Science and Engineering,University of Illinois at Urbana-Champaign

Chapters

  • 00:04Introduction
  • 00:33Oscillatory Driver Assembly
  • 01:51Adapter Assembly
  • 02:54Operation of the Experimental Setup for Oscillatory Flows in Microchannels
  • 04:24Observation and Amplitude Measurement
  • 06:11Results: Oscillatory Flow in a Simple Linear Microchannel with a Square Cross-Section
  • 07:49Conclusion

Summary

자동 번역

자동 번역

The protocol demonstrates a convenient method to produce harmonic oscillatory flow from 10-1000 Hz in microchannels. This is performed by interfacing a computer-controlled speaker diaphragm to the microchannel in a modular manner.

Tags

Oscillatory FlowMicrofluidicsExternal DriverSpeakerAux Controller ChipTone GeneratorWaveform3D Printed AdapterMicropipette TipTracer ParticlesGlycerol SolutionSyringe

Article

Embed

플레이리스트에 추가

Usage Statistics

Related Videos

The Generation of Higher-order Laguerre-Gauss Optical Beams for High-precision Interferometry

Construction and Characterization of External Cavity Diode Lasers for Atomic Physics

Patterning via Optical Saturable Transitions – Fabrication and Characterization

Electron Channeling Contrast Imaging for Rapid III-V Heteroepitaxial Characterization

Characterization of Full Set Material Constants and Their Temperature Dependence for Piezoelectric Materials Using Resonant Ultrasound Spectroscopy

Characterization of Ultra-fine Grained and Nanocrystalline Materials Using Transmission Kikuchi Diffraction

A Novel Method for In Situ Electromechanical Characterization of Nanoscale Specimens

Preparation of Liquid Crystal Networks for Macroscopic Oscillatory Motion Induced by Light

Generation of Size-controlled Poly (ethylene Glycol) Diacrylate Droplets via Semi-3-Dimensional Flow Focusing Microfluidic Devices

Studying Large Amplitude Oscillatory Shear Response of Soft Materials

Read Article