Journal
/
Ingenieurwesen
/
Assembly and Characterization of an External Driver for the Generation of Sub-Kilohertz Oscillatory Flow in Microchannels
JoVE Journal
Ingenieurwesen
Zum Anzeigen dieser Inhalte ist ein JoVE-Abonnement erforderlich.  Melden Sie sich an oder starten Sie Ihre kostenlose Testversion.
JoVE Journal Ingenieurwesen
Assembly and Characterization of an External Driver for the Generation of Sub-Kilohertz Oscillatory Flow in Microchannels

Assembly and Characterization of an External Driver for the Generation of Sub-Kilohertz Oscillatory Flow in Microchannels

DOI:
10.3791/63294-v

•

08:32 min

•

January 28, 2022

•

,
1Department of Mechanical Science and Engineering,University of Illinois at Urbana-Champaign

Kapitel

  • 00:04Introduction
  • 00:33Oscillatory Driver Assembly
  • 01:51Adapter Assembly
  • 02:54Operation of the Experimental Setup for Oscillatory Flows in Microchannels
  • 04:24Observation and Amplitude Measurement
  • 06:11Results: Oscillatory Flow in a Simple Linear Microchannel with a Square Cross-Section
  • 07:49Conclusion

Summary

Automatische Übersetzung

Automatische Übersetzung

The protocol demonstrates a convenient method to produce harmonic oscillatory flow from 10-1000 Hz in microchannels. This is performed by interfacing a computer-controlled speaker diaphragm to the microchannel in a modular manner.

Tags

Oscillatory FlowMicrofluidicsExternal DriverSpeakerAux Controller ChipTone GeneratorWaveform3D Printed AdapterMicropipette TipTracer ParticlesGlycerol SolutionSyringe

Article

Embed

ZUR WIEDERGABELISTE HINZUFÜGEN

Usage Statistics

Verwandte Videos

The Generation of Higher-order Laguerre-Gauss Optical Beams for High-precision Interferometry

Construction and Characterization of External Cavity Diode Lasers for Atomic Physics

Patterning via Optical Saturable Transitions – Fabrication and Characterization

Electron Channeling Contrast Imaging for Rapid III-V Heteroepitaxial Characterization

Characterization of Full Set Material Constants and Their Temperature Dependence for Piezoelectric Materials Using Resonant Ultrasound Spectroscopy

Characterization of Ultra-fine Grained and Nanocrystalline Materials Using Transmission Kikuchi Diffraction

A Novel Method for In Situ Electromechanical Characterization of Nanoscale Specimens

Preparation of Liquid Crystal Networks for Macroscopic Oscillatory Motion Induced by Light

Generation of Size-controlled Poly (ethylene Glycol) Diacrylate Droplets via Semi-3-Dimensional Flow Focusing Microfluidic Devices

Studying Large Amplitude Oscillatory Shear Response of Soft Materials

Read Article