JOVE JOURNAL

공학

Showing 1 - 12 in 666 videos.

1 2 3 4 5 6 7 8 9…56

Journal (Engineering)

A Computer Vision System for the Assessment of Ice Cream Melting Behavior

Eleonora Loffredi¹, Cristina Alamprese¹

¹Department of Food, Environmental and Nutritional Sciences (DeFENS),Università degli Studi di Milano

Journal (Engineering)

Experimental Setup and Procedure for Ice Cream Melting Trials

Eleonora Loffredi¹, Cristina Alamprese¹

¹Department of Food, Environmental and Nutritional Sciences (DeFENS),Università degli Studi di Milano

Journal (Engineering)

Melting Index Calculation and Gravimetric Analysis of Ice Cream Melting

Eleonora Loffredi¹, Cristina Alamprese¹

¹Department of Food, Environmental and Nutritional Sciences (DeFENS),Università degli Studi di Milano

Journal (Engineering)

Comparative Study of Simulation of Temperature Rise in Ring Main Unit

Xiang Wang¹, Qianxi Sun¹, Chengji Lu², Minkai Zhang², Jiangcheng Jin², Linsen Mu³, Enlin Li³, Anxin Wang³, Mingge Wu^1,2,3,4

¹College of Mechanical and Electrical Engineering,Wenzhou University, ²Institute of Laser and Optoelectronic Intelligent Manufacturing,Wenzhou University, ³Wecome Intelligent Manufacturing Co., Ltd., ⁴College of Mechanical Engineering,Nanjing University of Aeronautics and Astronautics

Journal (Engineering)

Comparing Two Temperature Field-Solving Modules to Address the Temperature Rise Problem of the Ring Main Unit

Xiang Wang¹, Qianxi Sun¹, Chengji Lu², Minkai Zhang², Jiangcheng Jin², Linsen Mu³, Enlin Li³, Anxin Wang³, Mingge Wu^1,2,3,4

¹College of Mechanical and Electrical Engineering,Wenzhou University, ²Institute of Laser and Optoelectronic Intelligent Manufacturing,Wenzhou University, ³Wecome Intelligent Manufacturing Co., Ltd., ⁴College of Mechanical Engineering,Nanjing University of Aeronautics and Astronautics

Journal (Engineering)

Fabrication of Bi₂Te₃ and Sb₂Te₃ Thermoelectric Thin Films using Radio Frequency Magnetron Sputtering Technique

Nurfarhana Ahmad Musri¹, Yoganash Putthisigamany¹, Puvaneswaran Chelvanathan¹, Norasikin Ahmad Ludin¹, Nadhrah Md Yatim², Ubaidah Syafiq¹

¹Solar Energy Research Institute (SERI),Universiti Kebangsaan Malaysia, ²Faculty of Science and Technology,Universiti Sains Islam Malaysia

Journal (Engineering)

Radio Frequency Magnetron Sputtering of Bi₂Te₃ and Sb₂Te₃ Thermoelectric Thin Films on Glass Substrates

Nurfarhana Ahmad Musri¹, Yoganash Putthisigamany¹, Puvaneswaran Chelvanathan¹, Norasikin Ahmad Ludin¹, Nadhrah Md Yatim², Ubaidah Syafiq¹

¹Solar Energy Research Institute (SERI),Universiti Kebangsaan Malaysia, ²Faculty of Science and Technology,Universiti Sains Islam Malaysia

Journal (Engineering)

Embedded Bioprinting of Tissue-like Structures Using κ-Carrageenan Sub-Microgel Medium

Hua Zhang*^1,2,3, Tong Zhu*^1,2,4, Yang Luo^1,2, Rong Xu^1,2,4, Guanrong Li^1,2,4, Zeming Hu², Xu Cao^1,2,4, Jie Yao^3,4, Yige Chen^1,2, Yingchun Zhu⁴, Kerong Wu^3,4

¹Research Institute of Smart Medicine and Biological Engineering,Ningbo University, ²Health Science Center,Ningbo University, ³Key Laboratory of Precision Medicine for Atherosclerotic Diseases of Zhejiang Province,The First Affiliated Hospital of Ningbo University, ⁴The First Affiliated Hospital of Ningbo University

Journal (Engineering)

Preparation of the κ-Carrageenan Sub-Microgel Suspension Bath for Embedded 3D Printing

Hua Zhang*^1,2,3, Tong Zhu*^1,2,4, Yang Luo^1,2, Rong Xu^1,2,4, Guanrong Li^1,2,4, Zeming Hu², Xu Cao^1,2,4, Jie Yao^3,4, Yige Chen^1,2, Yingchun Zhu⁴, Kerong Wu^3,4

¹Research Institute of Smart Medicine and Biological Engineering,Ningbo University, ²Health Science Center,Ningbo University, ³Key Laboratory of Precision Medicine for Atherosclerotic Diseases of Zhejiang Province,The First Affiliated Hospital of Ningbo University, ⁴The First Affiliated Hospital of Ningbo University

Journal (Engineering)

Printing Biomimetic Hydrogel Scaffolds Using a Custom-Designed Micro-Extrusion Bioprinter

Hua Zhang*^1,2,3, Tong Zhu*^1,2,4, Yang Luo^1,2, Rong Xu^1,2,4, Guanrong Li^1,2,4, Zeming Hu², Xu Cao^1,2,4, Jie Yao^3,4, Yige Chen^1,2, Yingchun Zhu⁴, Kerong Wu^3,4

¹Research Institute of Smart Medicine and Biological Engineering,Ningbo University, ²Health Science Center,Ningbo University, ³Key Laboratory of Precision Medicine for Atherosclerotic Diseases of Zhejiang Province,The First Affiliated Hospital of Ningbo University, ⁴The First Affiliated Hospital of Ningbo University

Journal (Engineering)

Embedded 3D Bioprinting of Esophageal Muscle-Layer Analogs for Tissue Engineering

Hua Zhang*^1,2,3, Tong Zhu*^1,2,4, Yang Luo^1,2, Rong Xu^1,2,4, Guanrong Li^1,2,4, Zeming Hu², Xu Cao^1,2,4, Jie Yao^3,4, Yige Chen^1,2, Yingchun Zhu⁴, Kerong Wu^3,4

¹Research Institute of Smart Medicine and Biological Engineering,Ningbo University, ²Health Science Center,Ningbo University, ³Key Laboratory of Precision Medicine for Atherosclerotic Diseases of Zhejiang Province,The First Affiliated Hospital of Ningbo University, ⁴The First Affiliated Hospital of Ningbo University

Journal (Engineering)

Development of a Bio-Hybrid Mosquito Stinger-Based Atomic Force Microscopy Probe

Nicolas Juncos Ljubich¹, Justin Puma¹, Zi Xin Zhang¹, Jianyu Li¹, Changhong Cao¹

¹Department of Mechanical Engineering,McGill University

1 2 3 4 5 6 7 8 9…56