Journal
/
공학
/
Study of a Dot-patterning Process on Flexible Materials using Impact Print-Type Hot Embossing Technology
JoVE 신문
공학
JoVE 비디오를 활용하시려면 도서관을 통한 기관 구독이 필요합니다.  전체 비디오를 보시려면 로그인하거나 무료 트라이얼을 시작하세요.
JoVE 신문 공학
Study of a Dot-patterning Process on Flexible Materials using Impact Print-Type Hot Embossing Technology

Study of a Dot-patterning Process on Flexible Materials using Impact Print-Type Hot Embossing Technology

DOI:
10.3791/60694-v

•

06:57 min

•

April 06, 2020

•

, , , , ,
1Department of Robotics Engineering,Daegu Gyeongbuk Institute of Science and Technology (DGIST)

Chapters

  • 00:04Introduction
  • 01:01Impact Print-type Hot Embossing Process
  • 02:26Experimental Design
  • 04:35Results: Impact Print-Type Hot Embossing Process to Change the Shape of Microscale Pattern in Real-Time using Position Control System on Various Types of Polymer Film
  • 05:34Conclusion

Summary

자동 번역

자동 번역

Impact print-type hot embossing technology uses an impact header to engrave dot patterns on flexible materials in real time. This technology has a control system for controlling the on-off motion and position of the impact header to create dot patterns with various widths and depths on different polymer films.

Tags

Impact Print-type Hot EmbossingDot PatterningFlexible MaterialsPolymer FilmsBio DevicesX StageZ StageHeat PlateFilm HolderImpact HeaderControl DeviceStage Control ProgramDAQ Driver SoftwareGlass Transition Temperature

Article

Embed

플레이리스트에 추가

Usage Statistics

Related Videos

Micro 3D Printing Using a Digital Projector and its Application in the Study of Soft Materials Mechanics

Fast Imaging Technique to Study Drop Impact Dynamics of Non-Newtonian Fluids

Advanced Experimental Methods for Low-temperature Magnetotransport Measurement of Novel Materials

Adsorption Device Based on a Langatate Crystal Microbalance for High Temperature High Pressure Gas Adsorption in Zeolite H-ZSM-5

Challenges in Rheological Characterization of Highly Concentrated Suspensions — A Case Study for Screen-printing Silver Pastes

Predicting Catalyst Extrudate Breakage Based on the Modulus of Rupture

A Fabrication and Measurement Method for a Flexible Ferroelectric Element Based on Van Der Waals Heteroepitaxy

Fabrication of Flexible Image Sensor Based on Lateral NIPIN Phototransistors

Data Communication Based on MQTT in a Polymer Extrusion Process

Determining Viral Disinfection Efficacy of Hot Water Laundering

Read Article