Journal
/
Ingénierie
/
Study of a Dot-patterning Process on Flexible Materials using Impact Print-Type Hot Embossing Technology
Journal JoVE
Ingénierie
Un abonnement à JoVE est nécessaire pour voir ce contenu.  Connectez-vous ou commencez votre essai gratuit.
Journal JoVE Ingénierie
Study of a Dot-patterning Process on Flexible Materials using Impact Print-Type Hot Embossing Technology

Study of a Dot-patterning Process on Flexible Materials using Impact Print-Type Hot Embossing Technology

DOI:
10.3791/60694-v

•

06:57 min

•

April 06, 2020

•

, , , , ,
1Department of Robotics Engineering,Daegu Gyeongbuk Institute of Science and Technology (DGIST)

Chapitres

  • 00:04Introduction
  • 01:01Impact Print-type Hot Embossing Process
  • 02:26Experimental Design
  • 04:35Results: Impact Print-Type Hot Embossing Process to Change the Shape of Microscale Pattern in Real-Time using Position Control System on Various Types of Polymer Film
  • 05:34Conclusion

Summary

Traduction automatique

Traduction automatique

Impact print-type hot embossing technology uses an impact header to engrave dot patterns on flexible materials in real time. This technology has a control system for controlling the on-off motion and position of the impact header to create dot patterns with various widths and depths on different polymer films.

Tags

Impact Print-type Hot EmbossingDot PatterningFlexible MaterialsPolymer FilmsBio DevicesX StageZ StageHeat PlateFilm HolderImpact HeaderControl DeviceStage Control ProgramDAQ Driver SoftwareGlass Transition Temperature

Article

Embed

AJOUTER À LA PLAYLIST

Usage Statistics

Vidéos Connexes

Micro 3D Printing Using a Digital Projector and its Application in the Study of Soft Materials Mechanics

Fast Imaging Technique to Study Drop Impact Dynamics of Non-Newtonian Fluids

Advanced Experimental Methods for Low-temperature Magnetotransport Measurement of Novel Materials

Adsorption Device Based on a Langatate Crystal Microbalance for High Temperature High Pressure Gas Adsorption in Zeolite H-ZSM-5

Challenges in Rheological Characterization of Highly Concentrated Suspensions — A Case Study for Screen-printing Silver Pastes

Predicting Catalyst Extrudate Breakage Based on the Modulus of Rupture

A Fabrication and Measurement Method for a Flexible Ferroelectric Element Based on Van Der Waals Heteroepitaxy

Fabrication of Flexible Image Sensor Based on Lateral NIPIN Phototransistors

Data Communication Based on MQTT in a Polymer Extrusion Process

Determining Viral Disinfection Efficacy of Hot Water Laundering

Read Article