Dergi
/
/
Assembly and Characterization of an External Driver for the Generation of Sub-Kilohertz Oscillatory Flow in Microchannels
JoVE Journal
Mühendislik
Bu içeriği görüntülemek için JoVE aboneliği gereklidir.  Oturum açın veya ücretsiz deneme sürümünü başlatın.
JoVE Journal Mühendislik
Assembly and Characterization of an External Driver for the Generation of Sub-Kilohertz Oscillatory Flow in Microchannels

Assembly and Characterization of an External Driver for the Generation of Sub-Kilohertz Oscillatory Flow in Microchannels

DOI:

08:32 min

January 28, 2022

,

Bölümler

  • 00:04Introduction
  • 00:33Oscillatory Driver Assembly
  • 01:51Adapter Assembly
  • 02:54Operation of the Experimental Setup for Oscillatory Flows in Microchannels
  • 04:24Observation and Amplitude Measurement
  • 06:11Results: Oscillatory Flow in a Simple Linear Microchannel with a Square Cross-Section
  • 07:49Conclusion

Özet

Otomatik Çeviri

The protocol demonstrates a convenient method to produce harmonic oscillatory flow from 10-1000 Hz in microchannels. This is performed by interfacing a computer-controlled speaker diaphragm to the microchannel in a modular manner.

İlgili Videolar

Read Article