Journal
/
공학
/
Use of Capillary Aerosol Generator in Continuous Production of Controlled Aerosol for Non-Clinical Studies
JoVE 신문
공학
This content is Free Access.
JoVE 신문 공학
Use of Capillary Aerosol Generator in Continuous Production of Controlled Aerosol for Non-Clinical Studies

Use of Capillary Aerosol Generator in Continuous Production of Controlled Aerosol for Non-Clinical Studies

DOI:
10.3791/61021-v

•

08:33 min

•

April 12, 2022

•

, , , , , , , , ,
1PMI R&D,Philip Morris Products S.A., 2PMI R&D,Philip Morris Research Laboratories Pte. Ltd., 3Applied Mathematics,University of Twente

Chapters

  • 00:04Introduction
  • 01:08CAG System Assembly
  • 03:14Calculation of CAG Aerosol Concentration and Dilution
  • 04:12CAG Aerosol Generation
  • 05:28Determination of Aerosol Collected Mass (ACM)
  • 06:32Results: Reproducibility and Particle Size Distribution of CAG Generated Aerosols
  • 07:49Conclusion

Summary

자동 번역

자동 번역

The protocol describes the settings and use of a capillary aerosol generator for continuous production of controlled aerosol from a multispecies liquid solution, suitable for steady large-volume aerosol delivery (e.g., in vivo inhalation studies).

Tags

Capillary Aerosol GeneratorCAGAerosol GenerationInhalation ToxicologyElectronic CigaretteLiquid CompositionTemperature ControlAir FlowNucleationCondensationProtocolAssemblyHeating ElementsThermocouplePush-in FittingsO-ringsPeak AdapterCouplingPeristaltic PumpCompressed Air

Article

Embed

플레이리스트에 추가

Usage Statistics

Related Videos

Fabrication and Visualization of Capillary Bridges in Slit Pore Geometry

Single Plane Illumination Module and Micro-capillary Approach for a Wide-field Microscope

Formation of Thick Dense Yttrium Iron Garnet Films Using Aerosol Deposition

Production of Synthetic Nuclear Melt Glass

Use of a Multi-compartment Dynamic Single Enzyme Phantom for Studies of Hyperpolarized Magnetic Resonance Agents

Capillary-based Centrifugal Microfluidic Device for Size-controllable Formation of Monodisperse Microdroplets

Wicking Tests for Unidirectional Fabrics: Measurements of Capillary Parameters to Evaluate Capillary Pressure in Liquid Composite Molding Processes

High-speed Continuous-wave Stimulated Brillouin Scattering Spectrometer for Material Analysis

Experimental Procedure for Laboratory Studies of In Situ Burning : Flammability and Burning Efficiency of Crude Oil

A Modular Microfluidic Technology for Systematic Studies of Colloidal Semiconductor Nanocrystals

Read Article