Journal
/
공학
/
Design, Instrumentation and Usage Protocols for Distributed In Situ Thermal Hot Spots Monitoring in Electric Coils using FBG Sensor Multiplexing
JoVE 신문
공학
This content is Free Access.
JoVE 신문 공학
Design, Instrumentation and Usage Protocols for Distributed In Situ Thermal Hot Spots Monitoring in Electric Coils using FBG Sensor Multiplexing

Design, Instrumentation and Usage Protocols for Distributed In Situ Thermal Hot Spots Monitoring in Electric Coils using FBG Sensor Multiplexing

DOI:
10.3791/59923-v

•

10:52 min

•

March 08, 2020

•

,
1School of Electrical and Electronic Engineering,University of Manchester

Chapters

  • 00:04Introduction
  • 01:03Fiber Optic Thermal Sensor Design
  • 03:08Interrogation System and Sensor Configuration
  • 04:15Packaging Preparation
  • 05:16Free Thermal Calibration
  • 06:33Test Coil Build and FBG Instrumentation
  • 07:35Static and Non-Uniform Thermal Condition Tests
  • 08:41Results: In-situ Thermal Hot Spot Monitoring in Electrical Coils
  • 09:53Conclusion

Summary

자동 번역

자동 번역

This paper presents a protocol that enables instrumentation of random wound electric coils with fiber Bragg grating (FBG) thermal sensors for the purpose of distributed condition monitoring of internal thermal hot spots.

Tags

Fiber Bragg Grating (FBG)Thermal Hot Spot MonitoringElectric CoilsDistributed SensingMultiplexingSensor DesignInstrumentationUsage Protocols

Article

Embed

플레이리스트에 추가

Usage Statistics

Related Videos

Terahertz Microfluidic Sensing Using a Parallel-plate Waveguide Sensor

In Situ Neutron Powder Diffraction Using Custom-made Lithium-ion Batteries

Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores

How to Build a Vacuum Spring-transport Package for Spinning Rotor Gauges

Plasmonic Trapping and Release of Nanoparticles in a Monitoring Environment

Micro/Nano-scale Strain Distribution Measurement from Sampling Moiré Fringes

In Situ Monitoring of the Accelerated Performance Degradation of Solar Cells and Modules: A Case Study for Cu(In,Ga)Se2 Solar Cells

Electric-field Control of Electronic States in WS2 Nanodevices by Electrolyte Gating

Methods of Ex Situ and In Situ Investigations of Structural Transformations: The Case of Crystallization of Metallic Glasses

Radio Frequency Magnetron Sputtering of GdBa2Cu3O7−δ/ La0.67Sr0.33MnO3 Quasi-bilayer Films on SrTiO3 (STO) Single-crystal Substrates

Read Article