Journal
/
공학
/
Indirect Fabrication of Lattice Metals with Thin Sections Using Centrifugal Casting
JoVE 신문
공학
JoVE 비디오를 활용하시려면 도서관을 통한 기관 구독이 필요합니다.  전체 비디오를 보시려면 로그인하거나 무료 트라이얼을 시작하세요.
JoVE 신문 공학
Indirect Fabrication of Lattice Metals with Thin Sections Using Centrifugal Casting

Indirect Fabrication of Lattice Metals with Thin Sections Using Centrifugal Casting

DOI:
10.3791/53605-v

•

08:32 min

•

May 14, 2016

•

, ,
1Department of Mechanical and Energy Engineering,University of North Texas, 2Department of Studio Art,University of North Texas

Chapters

  • 00:05Title
  • 00:58Planning and Burn-out
  • 02:49Centrifugal Casting: Part 1
  • 05:25Centrifugal Casting: Part 2
  • 06:58Results: Cast Metal Lattices
  • 07:50Conclusion

Summary

자동 번역

자동 번역

An indirect additive manufacturing method combining a 3D printing of polymers with a centrifugal casting is outlined for manufacturing 3D octet truss metals (Al and Cu alloys) having a unit cell length of 5 mm with a wall thickness of 0.5 mm.

Tags

Centrifugal CastingLattice MetalsThin SectionsIndirect FabricationOctet Truss StructureSacrificial PatternInvestment CastingBurnout ProcessMetal AlloyAluminumCopper

Article

Embed

플레이리스트에 추가

Usage Statistics

Related Videos

Polycrystalline Silicon Thin-film Solar cells with Plasmonic-enhanced Light-trapping

Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores

Speciation and Bioavailability Measurements of Environmental Plutonium Using Diffusion in Thin Films

Fabrication of Low Temperature Carbon Nanotube Vertical Interconnects Compatible with Semiconductor Technology

A Fabrication Method for Highly Stretchable Conductors with Silver Nanowires

Capillary-based Centrifugal Microfluidic Device for Size-controllable Formation of Monodisperse Microdroplets

Fabrication of Periodic Gold Nanocup Arrays Using Colloidal Lithography

Fabrication of Ultra-thin Color Films with Highly Absorbing Media Using Oblique Angle Deposition

Fabrication of Soft Pneumatic Network Actuators with Oblique Chambers

Fabrication of Microscope Stage for Vertical Observation with Temperature Control Function

Read Article