A prismatic beam's small element acted upon by vertical and horizontal shearing forces, along with normal forces, is considered for analyzing shear on …
An elemental section of a beam is considered to analyze the distribution of the stresses. The magnitude of the shearing force exerted on the horizontal …
A cantilever beam with a rectangular cross-section is subjected to distributed and point loads.
To calculate shearing stress in the beam, the loads acting …
A cantilever beam, when subjected to a load at its free end, develops the maximum bending moment at its fixed end.
Until the bending moment surpasses the …
When thin-walled members with non-symmetrical cross-sections are subjected to unsymmetric loading, they experience bending and twisting.
This dual effect …
A simple method to experimentally observe and measure the dispersion of a passive tracer in a laminar fluid flow is described. The method consists of …
The rapid development of X-ray imaging techniques with image processing and analysis skills has enabled the acquisition of CT images of granular soils …