Summary

Intravitreal Injection and Quantitation of Infection Parameters in a Mouse Model of Bacterial Endophthalmitis

Published: February 06, 2021
doi:

Summary

We describe here a method of intravitreal injection and subsequent bacterial quantitation in mouse model of bacterial endophthalmitis. This protocol can be extended for measuring host immune responses and bacterial and host gene expression.

Abstract

Intraocular bacterial infections are a danger to the vision. Researchers use animal models to investigate the host and bacterial factors and immune response pathways associated with infection to identify viable therapeutic targets and to test drugs to prevent blindness. The intravitreal injection technique is used to inject organisms, drugs, or other substances directly into the vitreous cavity in the posterior segment of the eye. Here, we demonstrated this injection technique to initiate infection in the mouse eye and the technique of quantifying intraocular bacteria. Bacillus cereus was grown in brain heart infusion liquid media for 18 hours and resuspended to a concentration 100 colony forming units (CFU)/0.5 µL. A C57BL/6J mouse was anesthetized using a combination of ketamine and xylazine. Using a picoliter microinjector and glass capillary needles, 0.5 µL of the Bacillus suspension was injected into the mid vitreous of the mouse eye. The contralateral control eye was either injected with sterile media (surgical control) or was not injected (absolute control). At 10 hours post infection, mice were euthanized, and eyes were harvested using sterile surgical tweezers and placed into a tube containing 400 µL sterile PBS and 1 mm sterile glass beads. For ELISAs or myeloperoxidase assays, proteinase inhibitor was added to the tubes. For RNA extraction, the appropriate lysis buffer was added. Eyes were homogenized in a tissue homogenizer for 1-2 minutes. Homogenates were serially diluted 10-fold in PBS and track diluted onto agar plates. The remainder of the homogenates were stored at -80 °C for additional assays. Plates were incubated for 24 hours and CFU per eye was quantified. These techniques result in reproducible infections in mouse eyes and facilitate quantitation of viable bacteria, the host immune response, and omics of host and bacterial gene expression.

Introduction

Bacterial endophthalmitis is a devastating infection that causes inflammation, and, if not treated properly, can result in loss of vision or blindness. Endophthalmitis results from the entry of bacteria into the interior of the eye1,2,3,4,5. Once in the eye, bacteria replicate, produce toxins and other noxious factors, and can cause irreversible damage to delicate retinal cells and tissues. Ocular damage can also be caused by inflammation, due to the activation of inflammatory pathways leading to inflammatory cell influx into the interior of the eye1,5,6. Endophthalmitis can occur following intraocular surgery (post-operative), a penetrating injury to the eye (post-traumatic), or from metastatic spread of bacteria into the eye from a different anatomical site (endogenous)7,8,9,10. Treatments for bacterial endophthalmitis includes antibiotics, anti-inflammatory drugs, or surgical intervention3,4,11. Even with these treatments, vision or the eye itself may be lost. The visual prognosis after bacterial endophthalmitis generally varies depending upon the treatment effectiveness, the visual acuity at presentation, and the virulence of the infecting organism.

Bacillus cereus (B. cereus) is one of the major bacterial pathogens that causes post-traumatic endophthalmitis7,12. A majority of B. cereus endophthalmitis cases have a rapid course, which can result in blindness within a few days. The hallmarks of B. cereus endophthalmitis include quickly evolving intraocular inflammation, eye pain, rapid loss of visual acuity, and fever. B. cereus grows rapidly in the eye compared to other bacteria which commonly cause eye infections2,4,12 and possesses many virulence factors. Therefore, the window for successful therapeutic intervention is relatively short1234567111213141516171819202122232425. Treatments for this infection are usually successful in treating endophthalmitis caused by other less virulent pathogens, but B. cereus endophthalmitis commonly results in greater than 70% of patients suffering from significant vision loss. About 50% of those patients undergo evisceration or enucleation of the infected eye7,16,22,23. The destructive and rapid nature of B. cereus endophthalmitis calls for immediate and proper treatment. Recent progress in discerning the underlying mechanisms of disease development have identified potential targets for intervention19,26,27. Experimental mouse models of B. cereus endophthalmitis continue to be useful in discerning the mechanisms of infection and testing potential therapeutics that may prevent vision loss.

Experimental intraocular infection of mice with B. cereus has been an instrumental model for understanding bacterial and host factors, as well as their interactions, during endophthalmitis28. This model mimics a post-traumatic or post-operative event, in which bacteria are introduced into the eye during an injury. This model is highly reproducible and has been useful for testing experimental therapies and providing data for improvements in standard of care1,6,19,29,30. Like many other infection models, this model allows for independent control of many parameters of infection and enables efficient and reproducible examination of infection outcomes. Studies in a similar model in rabbits over the past few decades have examined the effects of B. cereus virulence factors in the eye2,4,13,14,31. By injecting B. cereus mutant strains lacking individual or multiple virulence factors, the contribution of these virulence factors to disease severity can be measured by outcomes such as the concentration of bacteria at different hours of postinfection or the loss of visual function13,14,27,31,32. In addition, host factors have been examined in this model by infecting knockout mouse strains lacking specific inflammatory host factors26,29,33,34,35. The model is also useful for testing potential treatments for this disease by injecting novel compounds into the eye after infection30,36. In this manuscript, we describe a detailed protocol which includes infecting a mouse eye with B. cereus, harvesting the eye after infection, quantifying intraocular bacterial load, and preserving specimens to assay additional parameters of disease severity.

Protocol

All procedures were performed following the recommendations in the Guide for the Care and Use of Laboratory Animals and the Association for Research in Vision and Ophthalmology Statement for the Use of Animals in Ophthalmic and Vision Research. The protocols were approved by the Institutional Animal Care and Use Committee of the University of Oklahoma Health Sciences Center (protocol numbers 15-103, 18-043, and 18-087).

1. Sterile glass needles

  1. Turn On the needle pipette puller.
  2. Adjust the Heater knob until the display shows 12.6.
  3. Open the door and manually feed the 5 μL capillary tube through the upper clamp and heater filament until half of the tubing extends below the filament (Figure 1A).
  4. Confirm that the capillary tube is in the “V” groove in the upper clamp. Tighten the upper clamp.
  5. With the lower clamp open, manually adjust the vertical slide up until the lower clamp reaches its upper limit. Confirm that the tube is in the “V” groove in the lower clamp. Tighten the lower clamp.
  6. Close the door and confirm that the ‘Ready’ light is on. Push the Start button to initiate the heater and pulling sequence (Figure 1B).
  7. Ensure the heater turns off automatically after heat and gravity pulls the capillary tube apart (Figure 1C), and the slide moves downward.
  8. Open the door. While holding the top of the capillary tube, untighten the top clamp. Remove the upper capillary tube and set it aside.
  9. Hold the capillary tube in the bottom slide and untighten the lower clamp. Remove the lower capillary tube and set it aside.
  10. Use a microelectrode beveler with a 0.05 μm alumina abrasive grinding plate to bevel the pulled capillary tube to create the injection needles.
  11. Pipette enough water onto the grinding plate to cover the surface (Figure 1D).
  12. Turn On the beveller so that it begins to rotate at 60 rpm. Place the pulled capillary tube into the pipette clamp in the “V” groove. Tighten the clamp and adjust the angle of the pipette clamp to 30°.
  13. Adjust the tip of the pointed edge of the capillary tube approximately two-thirds distance away from the center of rotation of the grinding plate.
  14. Lower the clamped capillary tube by adjusting the coarse control knob at the top of the manipulator. Continue to lower the capillary tube until the tip of the capillary tube extends below the surface of the water and contacts the abrasive surface of the grinding plate.
  15. Monitor the beveling progress using the microscope attached to the beveller. After 5 min, adjust the fine control to raise the glass needle from the grinding plate.
  16. Remove the glass needle and place it under 10x magnification to check the tip of the capillary tube (Figure 1E,F).
  17. To ensure that there are no blockages, insert the glass needle into a pipette holder on a syringe and push air into a 1 mL tube of 99% ethanol. If air bubbles form at the tip of the needle, the needle has no blockages and can be used for microinjection. This process also ensures the sterility of the glass needles.
  18. One capillary tube can hold up to 5 μL fluid. Mark the capillary tube into 10 sections to calculate the distances on the needle to mark for 0.5 μL volumes. Mark a scale with that distance that holds 0.5 μL for future preparation. For a 5 μL needle, distances of 0.7 mm apart equate to 0.5 μL (Figure 1G).

2. Bacillus cereus culture

  1. Perform all procedures in this section under Biosafety Level 2 conditions.
  2. Streak freezer stock of B. cereus ATCC 14579 for single colony isolation on a 5% sheep blood agar plate and incubate overnight at 37 ˚C (Figure 2A).
  3. Pipette 5 mL of sterile Brain Heart Infusion (BHI) broth into a 10 mL sterile snap-cap tube (Figure 2B). Using a sterile loop or needle, pick a single colony of B. cereus ATCC 14579 from the agar plate and inoculate the liquid BHI.
  4. Vortex the sample briefly. Place the snap-cap tube into a rotating incubator. Set the temperature at 37 °C and speed at 200 rpm. After 18 h, remove the culture from the incubator (Figure 2B).

3. Bacterial dilution for intravitreal injection

  1. Perform all procedures in this section under Biosafety Level 2 conditions.
  2. Calculate the volume of the overnight B. cereus culture to add to 10 mL of fresh BHI to achieve 200 colony forming units per microliter (CFU/μL). For example, an overnight culture of B. cereus in BHI replicates to approximately 2 x 108 CFU/mL, which can then be diluted to 200 CFU/μL by pipetting 10 μL of overnight culture into 10 mL of fresh BHI.
  3. Pipette 1 mL of the freshly diluted culture into a 1.5 mL microcentrifuge tube. Maintain this tube on ice until intravitreal injection. Perform the intravitreal injection within 60 min of diluting the bacterial culture.

4. Mouse intravitreal injection

  1. Perform all procedures in this section under Biosafety Level 2 conditions.
  2. Prepare the procedure site by placing medical underpads on the operating table.
  3. Turn On the microinjector and open the gas valve on the compressed air tank attached to the microinjector. Adjust the tank regulator until the gas delivery is approximately 60 psi.
  4. On the microinjector, press Mode until the screen shows Balance. Press Balance and place the computer mouse on the operating table. Connect the stainless-steel pipette holder to the tubing attached to ‘Fill/Output’ of the injector. This tube is always connected to the injector.
  5. Insert the capillary needle to the other end of the pipette holder by screwing tight the pipette holder connector around the needle.
  6. Turn on the ophthalmic microscope and turn on its light to an intensity of 50%. Adjust the microscope over the procedure site on the operating table and adjust the microscope to the desired focus.
  7. Before the procedure begins, confirm that the mouse is adequately anesthetized by testing the pedal withdrawal reflex. Be sure to follow your IACUC approved protocol for anesthesia. 
  8. Place the anesthetized mouse on the medical underpads with its nose pointed to the right and leaning on its left side.
  9. Look at the right eye of the mouse through the ophthalmic microscope and open the lids by opening the tongs of a reverse action forceps on either side of the eye to expose the injection site (Figure 3C).
  10. Fill the capillary needle with the 200 CFU/μL dilution by left clicking the mouse pad connected to the microinjector (Figure 3D).
  11. Secure the animal’s head with the left hand and place the tip of needle at the limbus of the eye. With the needle in the bevel up position and at 45° angle, puncture the mouse eye, but ensure that only the sharp tip of the needle (~0.5 mm) is inserted when injecting.
  12. Once the needle tip is inserted, move the left hand from the mouse head to the mouse pad and right click on the mouse pad to inject 0.5 μL of the B. cereus dilution. To prevent leakage, leave the needle tip inside the mouse eye for 2-3 seconds before removing (Figure 3E)1,19,26,27,32,34,36,37,38.
  13. Release the forceps and place the mouse into a cage that is sitting on a warming pad. Monitor these mice until they have recovered from anesthesia (Figure 3F).
  14. Once mice are recovered from the anesthesia, return the cage to its proper rack. If the mice will be subjected to retinal function analysis by electroretinography, cages should be returned to a dark room for proper dark adaptation.

5. Harvesting tube preparation

  1. Place 1 mm sterile glass beads into 1.5 mL screw cap tubes.
  2. Sterilize these tubes in an autoclave on a dry setting. Let the tubes cool to room temperature before use.
  3. Add 10 mL of 1x sterile phosphate-buffered saline (PBS) to a sterile 15 mL centrifuge tube.
  4. Add 1 tablet of protease inhibitor cocktail tablet into the tube. Mix by vortexing19,27,29,34,35.
  5. Pipette 400 μL of 1x phosphate-buffered saline (PBS) containing protease inhibitor into each autoclaved harvest tube. Label the tubes and place on ice. (Figure 4A).

6. Harvesting the eyes

  1. Perform all procedures in this section under Biosafety Level 2 conditions.
  2. Euthanize the mouse by CO2 inhalation. Use a secondary method to confirm euthanasia.
  3. Hold the euthanized mouse head secure and open the fine tip forceps on either side of the infected eye. Push down towards the head to proptose the eye. Once the tongs are behind the globe of the eye, squeeze the tongs together. Pull forceps away from the head to detach the eyeball (Figure 4B).
  4. Immediately place the eyeball into a labeled harvesting tube. Place tubes on ice for no more than 60 min (Figure 4C).

7. Intraocular bacterial count

  1. Perform all procedures in this section under Biosafety Level 2 conditions.
  2. Confirm that all harvest tubes are tightly closed and are balanced while in the tissue homogenizer (Figure 5A). Turn on the tissue homogenizer for 1 min to homogenize the samples. Wait for 30 s, then turn on for another minute. Place tubes on ice (Figure 5B,C).
  3. Serially dilute each sample 10-fold by sequentially transferring 20 μL of the homogenate into 180 μL of sterile 1x PBS. Dilute until a factor of 10-7 is reached (Figure 5D).
  4. Label each row of a warm, square BHI plate with the proper dilution factors. Transfer 10 μL of each dilution in a row to the top BHI plate that is tilted approximately 45°. Let the sample run until it almost reaches the bottom of the plate, then lay the plate flat (Figure 5E)39.
  5. When sample is absorbed into the BHI agar, transfer the plate to a 37 °C incubator. Colonies should begin to be visible 8 h after being placed in the incubator.
  6. Remove the plate from the incubator before the growth of the B. cereus colonies interferes with identifying individual colonies (Figure 5F).
  7. For an accurate representation of the concentration in the sample, count the row that has between 10-100 colonies. For example, a row with the dilution fraction of 10-4 that has 45 colonies will have a concentration of 4.5 x 105 CFU/mL.
  8. To calculate the total number of bacteria per eye, multiply the concentration by 0.4, which represents the milliliter volume of 1x PBS used to homogenize the eye. For example, the 4.5 x 105 CFU/mL concentration would translate to 1.8 x 105 CFU B. cereus per eye.

8. Preservation of samples

  1. Place homogenate samples in a labeled freezer box and place this box into a -80 °C freezer. These samples can be used later for inflammatory mediator analysis by ELISA.

Representative Results

Generating a reproducible inoculum and accuracy of the intravitreal injection procedure are key steps in developing models of microbial endophthalmitis. Here, we demonstrated the intravitreal injection procedure using Gram-positive Bacillus cereus. We injected 100 CFU/0.5 μL of B. cereus into the mid-vitreous of five C57BL6 mice. After 10 h postinfection, we observed intraocular growth of B. cereus to approximately 1.8 x 105 CFU/eye. Figure 1 demonstrates the construction of glass needles to deliver the bacteria into the midvitreous of the mouse eyes. Bacillus cereus growing on a blood agar plate and in culture tubes is shown in Figure 2. Figure 3 shows the mouse intravitreal injection procedure using an air pressurized injection system. Figure 4 demonstrates the process of harvesting the infected eyes after the desired time postinfection. Figure 5 shows the technique for homogenizing the infected eyes. Figure 6 demonstrates the intraocular bacterial counts from five different mouse eyes at 10 h postinfection. Figure 7 depicts the overall procedure and a graphical representation of a mouse intravitreal injection.

Figure 1
Figure 1: Making beveled glass needles. Glass needles were made from disposable microcapillary pipettes using a needle/pipette puller and a micropipette beveler. (A) Clamped glass capillary tube in the needle/pipette puller. (B,C) Creation of glass needles using the desired voltage. (D) Beveling the glass micropipettes. (E,F) Glass micropipettes before and after beveling. (E) Scaling the glass needles. Space between two black points holds 0.5 µL. Please click here to view a larger version of this figure.

Figure 2
Figure 2: Bacillus cereus ATCC 14579. (A) Bacillus cereus growing on a blood agar plate. Individual colonies of B. cereus typically display clear zones of hemolysis on a blood agar plate. (B) Turbid overnight cultures of B. cereus. (C) Gram-staining of B. cereus. B. cereus are Gram-positive rod-shaped bacteria. (D) Electron micrograph of Bacillus cereus. This electron micrograph shows rod shaped Bacillus cereus with hair like structures called flagella. Please click here to view a larger version of this figure.

Figure 3
Figure 3: Mouse intravitreal injection. The injection procedure is performed using a pressurized air injector with viewing of the operating field using a commercial microscope (A) ketamine and xylazine drug to anesthetize the mouse. (B) Administration of ketamine and xylazine by intraperitoneal injection to anesthetize the mouse. (C) Clamping periocular skin back to proptose the eye. (D) Filling up the needles with bacteria using the air pressurized injector. (E) Intravitreal injection. (F) Monitoring infected mouse after anesthesia. Please click here to view a larger version of this figure.

Figure 4
Figure 4: Harvesting mouse infected eye. Post-infection, after the desired time point, harvest infected mouse eyes using sterile tweezers. (A) PBS containing sterile glass beads. (B) Harvesting of the infected eye. (C) Harvest tube containing a mouse eye. Please click here to view a larger version of this figure.

Figure 5
Figure 5: Processing the harvested eye for intraocular bacterial count. (A) Harvest tube with infected eye clamped tightly to a tissue homogenizer. (B) Infected eyes were homogenized twice for 1 min each. Track dilution (D) of the eye homogenates (C) and subsequent plating (E) for the bacterial quantitation. (E) Representative individual Bacillus cereus colony after track dilution. Please click here to view a larger version of this figure.

Figure 6
Figure 6: Intraocular bacterial counts at 10 h postinfection. M, mouse number. CFU, colony forming units. Please click here to view a larger version of this figure.

Figure 7
Figure 7: Mouse intravitreal injection. (A) Overall flowchart of the mouse intravitreal injection procedure. (B) Graphical presentation of the intravitreal injection. During the procedure, sterile, beveled glass needles containing a culture of B. cereus are inserted into the midvitreous of the mouse eye, and B. cereus are delivered using an air-pressurized microinjection system. Please click here to view a larger version of this figure.

Discussion

Even with the availability of potent antibiotics, anti-inflammatory drugs, and vitrectomy surgery, bacterial endophthalmitis can blind a patient. Clinical studies have been useful in studying endophthalmitis; however, experimental models of endophthalmitis provide quick and reproducible results that can be translated to progress in standard of care, resulting in better visual outcome for patients.

The vitreous volume of the mouse eye is approximately 7 µL40. This small volume only allows for a limited amount of material to be injected. Volumes greater than 1.0 µL should not be injected in order to avoid ocular damage. The process requires specific equipment and practice of techniques to ensure reproducibility and accuracy. Endophthalmitis has been studied in primates, swine, rabbits, rats, guinea pigs and in the mouse28,41,42,43,44,45. Among the larger species, eyes are much closer in size to human eyes, and intravitreal injections into larger eyes can be performed without special equipment. Except for the mouse, the absence of knockout strains and reagents to study the host immune responses in other animal models constrains their usefulness in experimental endophthalmitis.

Endophthalmitis occurs most frequently as a complication of cataract surgery. This infection can also occur following penetrating ocular trauma or systemic infection. The visual outcome in this disease partly depends on the virulence of the infecting pathogen. In mice, visual outcome also depends on their immune status. Understanding the mechanisms of disease pathogenesis has been facilitated by studying the disease in experimental animal models28. The protocol for mouse intravitreal injection and the quantification of infection parameters can be adapted to study endophthalmitis initiated with almost any type of bacterial or fungal pathogen28. Furthermore, this protocol can also be applied and modified to study anatomical changes, inflammatory processes, and the gene expression profiles of both the bacteria and host during infection.

Mouse intravitreal injection and subsequent analysis of infection parameters consist of several critical steps (Figure 7). The glass needle must be accurately created, marked, and sterilized. The sharp end of beveled glass needle and proper scaling determines the adequate delivery of the bacteria and globe puncture. If the end of the needle is short and is not appropriately beveled, it could create a large hole on the globe which could cause leakage, contamination of the globe, and an inaccurate disease outcome. Therefore, it is recommended to observe the glass micropipettes while beveling under 10x optical zoom of a bright field microscope. To ensure the delivery of the correct quantity of bacteria, dilutions should be calculated beforehand, and the proper volume scale should be marked on the glass needle. Parameters for needle pulling and beveling using other types of equipment may vary.

The described intravitreal injection technique utilizes an air-pressurized microinjector system for the proper delivery of the bacteria into the mouse eye1. The appropriate use of this microinjector is crucial for the reproducible infection parameters. Since the air pressure determines the speed of delivery, excessive force might rapidly inject a larger volume into the eyes, causing excessive intraocular pressure and/or globe rupture. Therefore, the recommendation is to use a pressure of 10-13 psi to fill and inject during the procedure. Another potential issue is leakage of the bacterial solution from the glass needles after filling. Leakage could result in the injection of inaccurate volumes into the mouse eyes. Always check connections between the injection system, tubing, and glass needles before injections.

Injecting accurate quantities of bacteria is vital for the reproducibility of experimental bacterial endophthalmitis. Different experimental endophthalmitis models require inoculation of specific numbers of bacteria12,28,46,47,48,49. For B. cereus endophthalmitis, injecting 100 CFU is needed to initiate a reproducible infection1. Since bacterial growth depends on the growth medium and conditions, the growth environment, media, and dilutions must be repeated each time. Therefore, it is recommended to test the culture conditions before the experiment to reproduce the accurate inoculum in the appropriate volume for injection. As noted above, the upper limit for intravitreal injection into mouse eyes is 1.0 µL28. An excessive volume elevates the intraocular pressure which could result in glaucoma, detach the retina from the posterior segment, or rupture the globe. Intravitreal injection and the resulting infection in mice may not perfectly mimic B. cereus endophthalmitis in a human. Most animal models of human disease are limited in this way. Known quantities of B. cereus are injected into the eye after growth in nutrient-rich media. For clinical cases of B. cereus endophthalmitis, the infecting quantities are not known and the sources of contamination vary. However, the advantages of using characterized organisms and mouse strains and generating reproducible infection courses outweigh these limitations.

Proper harvesting of infected eyes is another critical step. Maintaining aseptic conditions is essential to avoid any cross-contamination which could interfere with interpretation of the data. Therefore, the recommendation is to disinfect the workbench and all instruments with 70% ethanol before harvest. Bacterial numbers increase rapidly inside the vitreous environment during infection, which may cause swelling of the eye. Therefore, care should be taken to gently remove the eye during harvesting prevent rupture of the globe. Furthermore, the cap of the harvest tube containing the infected eye must be adequately tightened before placing the tube in tissue homogenizer. A loose cap will result in leakage and contamination of the tissue homogenizer leading to inaccurate quantitation of bacteria in the leaking tubes. The eye homogenization procedure also elevates temperatures of the tubes. Therefore, it is recommended to homogenize 1 minute at a time. Elevated temperatures could impact the quantitation of some infection parameters. While this method does not provide the number of bacteria within specific locations of the eye, when combined with histological methods, we can estimate where bacteria might be localized. Localization of B. cereus in the eye during endophthalmitis has been reported in rabbits, whose eyes are larger and more easily dissected into subcompartments.2

Intravitreal injection mimics the delivery of organisms to the posterior segment of the eye, which initiates infection. This initial step facilitates the qualitative and quantitative study of infection parameters in a highly reproducible mouse model of experimental endophthalmitis. These models are also used to estimate ocular inflammation by quantifying myeloperoxidase in infiltrating neutrophils, identifying specific cell types by flow cytometry, quantifying cytokines and chemokines by real-time PCR and/or ELISA, and observing ocular architecture by histopathology1,6,19,20,26,27,34,35,38. Infected mouse eyes are harvested with different diluents depending on the type of infection parameters to be measured. For gene expression analysis, a different lysis buffer is required26. For histopathological examination, harvested eyes are placed in a fixative solution. The multitude of genetic knockout mice also facilitates the study the role of various immune factors and cells. Intravitreal injection is therefore a mainstay technique for researchers in the field of intraocular infections and therapeutics.

Divulgazioni

The authors have nothing to disclose.

Acknowledgements

The authors thank Dr. Feng Li and Mark Dittmar (OUHSC P30 Live Animal Imaging Core, Dean A. McGee Eye Institute, Oklahoma City, OK, USA) for their assistance. Our research has been supported by National Institutes of Health grants R01EY028810, R01EY028066, R01EY025947, and R01EY024140. Our research has also been supported by P30EY21725 (NIH CORE grant for Live Animal Imaging and Analysis, Molecular Biology, and Cellular Imaging). Our research has also been supported by the NEI Vision Science Pre-doctoral Trainee program 5T32EY023202, a Presbyterian Health Foundation Research Support grant, and an unrestricted grant to the Dean A. McGee Eye Institute from Research to Prevent Blindness.

Materials

2-20 µL pipette RANIN L0696003G NA
37oC Incubator Fisher Scientific 11-690-625D NA
Bacto Brain Heart Infusion BD 90003-032 NA
Cell Microinjector MicroData Instrument, Inc. PM2000 NA
Fine tip forceps Thermo Fisher Scientific 12-000-122 NA
Glass beads 1.0 mm BioSpec 11079110 NA
Incubator Shaker New Brunswick Scientific NB-I2400 NA
Microcapillary Pipets 5 Microliters Kimble 71900-5 NA
Micro-Pipette Beveler Sutter Instrument Co. BV-10 NA
Microscope Axiostar Plus Zeiss NA
Microscope OPMI Lumera Zeiss NA
Mini-Beadbeater-16 BioSpec Model 607 NA
Multichannel pipette 30-300 µL Biohit 15626090 NA
Multichannel pipette 5-100 µL Biohit 9143724 NA
Needle/Pipette Puller Kopf 730 NA
PBS GIBCO 1897315 Molecular grade
Protease Inhibitor Cocktail Roche 4693159001 Molecular grade
Reverse action forceps Katena K5-8228 NA

Riferimenti

  1. Ramadan, R. T., Ramirez, R., Novosad, B. D., Callegan, M. C. Acute inflammation and loss of retinal architecture and function during experimental Bacillus endophthalmitis. Current Eye Research. 31 (11), 955-965 (2006).
  2. Callegan, M. C., Booth, M. C., Jett, B. D., Gilmore, M. S. Pathogenesis of gram-positive bacterial endophthalmitis. Infection and Immunity. 67 (7), 3348-3356 (1999).
  3. Durand, M. L. Bacterial and Fungal Endophthalmitis. Clinical Microbiology Reviews. 30 (3), 597-613 (2017).
  4. Callegan, M. C., Engelbert, M., Parke, D. W., Jett, B. D., Gilmore, M. S. Bacterial endophthalmitis: Epidemiology, therapeutics, and bacterium-host interactions. Clinical Microbiology Reviews. 15 (1), 111-124 (2002).
  5. Livingston, E. T., Mursalin, M. H., Callegan, M. C. A Pyrrhic Victory: The PMN Response to Ocular Bacterial Infections. Microorganisms. 7 (11), 537 (2019).
  6. Ramadan, R. T., Moyer, A. L., Callegan, M. C. A role for tumor necrosis factor-alpha in experimental Bacillus cereus endophthalmitis pathogenesis. Investigative Ophthalmology & Visual Science. 49 (10), 4482-4489 (2008).
  7. Davey, R. T., Tauber, W. B. Posttraumatic endophthalmitis: The emerging role of Bacillus cereus infection. Reviews of Infectious Dissease. 9 (1), 110-123 (1987).
  8. Ramappa, M., et al. An outbreak of acute post-cataract surgery Pseudomonas sp. endophthalmitis caused by contaminated hydrophilic intraocular lens solution. Ophthalmology. 119 (3), 564-570 (2012).
  9. Coburn, P. S., et al. Bloodstream-To-Eye Infections Are Facilitated by Outer Blood-Retinal Barrier Dysfunction. PLoS One. 11 (5), 015560 (2016).
  10. Ness, T., Pelz, K., Hansen, L. L. Endogenous endophthalmitis: Microorganisms, disposition and prognosis. Acta Ophthalmologica Scandinavica. 85 (8), 852-856 (2007).
  11. Novosad, B. D., Callegan, M. C. Severe bacterial endophthalmitis: Towards improving clinical outcomes. Expert Review of Ophthalmology. 5 (5), 689-698 (2010).
  12. Mursalin, M. H., Livingston, E. T., Callegan, M. C. The cereus matter of Bacillus endophthalmitis. Experimental Eye Research. 193, 107959 (2020).
  13. Callegan, M. C., et al. Relationship of plcR-regulated factors to Bacillus endophthalmitis virulence. Infection and Immunity. 71 (6), 3116-3124 (2003).
  14. Beecher, D. J., Pulido, J. S., Barney, N. P., Wong, A. C. Extracellular virulence factors in Bacillus cereus endophthalmitis: Methods and implication of involvement of hemolysin BL. Infection and Immunity. 63 (2), 632-639 (1995).
  15. Callegan, M. C., et al. Contribution of membrane-damaging toxins to Bacillus endophthalmitis pathogenesis. Infection and Immunity. 70 (10), 5381-5389 (2002).
  16. Cowan, C. L., Madden, W. M., Hatem, G. F., Merritt, J. C. Endogenous Bacillus cereus panophthalmitis. Annals of Ophthalmology. 19 (2), 65-68 (1987).
  17. Callegan, M. C., et al. Virulence factor profiles and antimicrobial susceptibilities of ocular Bacillus isolates. Current Eye Research. 31 (9), 693-702 (2006).
  18. Callegan, M. C., et al. Bacillus endophthalmitis: Roles of bacterial toxins and motility during infection. Investigative Ophthalmology & Visual Science. 46 (9), 3233-3238 (2005).
  19. Mursalin, M. H. Bacillus S-layer-mediated innate interactions during endophthalmitis. Frontiers in Immunology. 11 (215), (2020).
  20. Moyer, A. L., Ramadan, R. T., Novosad, B. D., Astley, R., Callegan, M. C. Bacillus cereus-induced permeability of the blood-ocular barrier during experimental endophthalmitis. Investigative Ophthalmology & Visual Science. 50 (8), 3783-3793 (2009).
  21. Callegan, M. C., et al. Efficacy of vitrectomy in improving the outcome of Bacillus cereus endophthalmitis. Retina. 31 (8), 1518-1524 (2011).
  22. David, D. B., Kirkby, G. R., Noble, B. A. Bacillus cereus endophthalmitis. British Journal of Ophthalmology. 78 (7), 577-580 (1994).
  23. Vahey, J. B., Flynn, H. W. Results in the management of Bacillus endophthalmitis. Ophthalmic Surgery. 22 (11), 681-686 (1991).
  24. Wiskur, B. J., Robinson, M. L., Farrand, A. J., Novosad, B. D., Callegan, M. C. Toward improving therapeutic regimens for Bacillus endophthalmitis. Investigative Ophthalmology & Visual Science. 49 (4), 1480-1487 (2008).
  25. Alfaro, D. V., et al. Experimental Bacillus cereus post-traumatic endophthalmitis and treatment with ciprofloxacin. British Journal of Ophthalmology. 80 (8), 755-758 (1996).
  26. Coburn, P. S., et al. TLR4 modulates inflammatory gene targets in the retina during Bacillus cereus endophthalmitis. BMC Ophthalmology. 18 (1), 96 (2018).
  27. Mursalin, M. H., et al. S-layer Impacts the Virulence of Bacillus in Endophthalmitis. Investigative Ophthalmology & Visual Science. 60 (12), 3727-3739 (2019).
  28. Astley, R. A., Coburn, P. S., Parkunan, S. M., Callegan, M. C. Modeling intraocular bacterial infections. Progress in Retinal and Eye Research. 54, 30-48 (2016).
  29. Parkunan, S. M., et al. CXCL1, but not IL-6, significantly impacts intraocular inflammation during infection. Journal of Leukocyte Biology. 100 (5), 1125-1134 (2016).
  30. LaGrow, A. L., et al. A Novel Biomimetic Nanosponge Protects the Retina from the Enterococcus faecalis Cytolysin. mSphere. 2 (6), 00335 (2017).
  31. Beecher, D. J., Olsen, T. W., Somers, E. B., Wong, A. C. Evidence for contribution of tripartite hemolysin BL, phosphatidylcholine-preferring phospholipase C, and collagenase to virulence of Bacillus cereus endophthalmitis. Infection and Immunity. 68 (9), 5269-5276 (2000).
  32. Callegan, M. C., et al. The role of pili in Bacillus cereus intraocular infection. Experimental Eye Research. 159, 69-76 (2017).
  33. Miller, F. C., et al. Targets of immunomodulation in bacterial endophthalmitis. Progress in Retinal and Eye Research. 73, 100763 (2019).
  34. Parkunan, S. M., Astley, R., Callegan, M. C. Role of TLR5 and flagella in Bacillus intraocular infection. PLoS One. 9 (6), 100543 (2014).
  35. Parkunan, S. M., et al. Unexpected roles for Toll-Like receptor 4 and TRIF in intraocular infection with Gram-positive bacteria. Infection and Immunity. 83 (10), 3926-3936 (2015).
  36. Coburn, P. S., et al. Disarming Pore-Forming Toxins with Biomimetic Nanosponges in Intraocular Infections. mSphere. 4 (3), 00262-00319 (2019).
  37. LaGrow, A., et al. Biomimetic nanosponges augment gatifloxacin in reducing retinal damage during experimental MRSA endophthalmitis. Investigative Ophthalmology & Visual Science. 60 (9), 4632 (2019).
  38. Novosad, B. D., Astley, R. A., Callegan, M. C. Role of Toll-like receptor (TLR) 2 in experimental Bacillus cereus endophthalmitis. PLoS One. 6 (12), 28619 (2011).
  39. Jett, B. D., Hatter, K. L., Huycke, M. M., Gilmore, M. S. Simplified agar plate method for quantifying viable bacteria. Biotechniques. 23 (4), 648-650 (1997).
  40. Yu, D. Y., Cringle, S. J. Oxygen distribution in the mouse retina. Investigative Ophthalmology & Visual Science. 47 (3), 1109-1112 (2006).
  41. Beyer, T. L., O’Donnell, F. E., Goncalves, V., Singh, R. Role of the posterior capsule in the prevention of postoperative bacterial endophthalmitis: experimental primate studies and clinical implications. British Journal of Ophthalmology. 69 (11), 841-846 (1985).
  42. Tucker, D. N., Forster, R. K. Experimental bacterial endophthalmitis. Archives of Ophthalmology. 88 (6), 647-649 (1972).
  43. Alfaro, D. V., et al. Experimental pseudomonal posttraumatic endophthalmitis in a swine model. Treatment with ceftazidime, amikacin, and imipenem. Retina. 17 (2), 139-145 (1997).
  44. Silverstein, A. M., Zimmerman, L. E. Immunogenic endophthalmitis produced in the guinea pig by different pathogenetic mechanisms. American Journal of Ophthalmology. 48 (5), 435-447 (1959).
  45. Ravindranath, R. M., Hasan, S. A., Mondino, B. J. Immunopathologic features of Staphylococcus epidermidis-induced endophthalmitis in the rat. Current Eye Research. 16 (10), 1036-1043 (1997).
  46. Kumar, A., Singh, C. N., Glybina, I. V., Mahmoud, T. H., Yu, F. S. Toll-like receptor 2 ligand-induced protection against bacterial endophthalmitis. The Journal of Infectious Diseases. 201 (2), 255-263 (2010).
  47. Mylonakis, E., et al. The Enterococcus faecalis fsrB gene, a key component of the fsr quorum-sensing system, is associated with virulence in the rabbit endophthalmitis model. Infection and Immunity. 70 (8), 4678-4681 (2002).
  48. Sanders, M. E., et al. The Streptococcus pneumoniae capsule is required for full virulence in pneumococcal endophthalmitis. Investigative Ophthalmology & Visual Science. 52 (2), 865-872 (2011).
  49. Hunt, J. J., Astley, R., Wheatley, N., Wang, J. T., Callegan, M. C. TLR4 contributes to the host response to Klebsiella intraocular infection. Current Eye Research. 39 (8), 790-802 (2014).

Play Video

Citazione di questo articolo
Mursalin, M. H., Livingston, E., Coburn, P. S., Miller, F. C., Astley, R., Callegan, M. C. Intravitreal Injection and Quantitation of Infection Parameters in a Mouse Model of Bacterial Endophthalmitis. J. Vis. Exp. (168), e61749, doi:10.3791/61749 (2021).

View Video