Journal
/
生物工程
/
Agarose Fluid Gels Formed by Shear Processing During Gelation for Suspended 3D Bioprinting
JoVE 杂志
生物工程
This content is Free Access.
JoVE 杂志 生物工程
Agarose Fluid Gels Formed by Shear Processing During Gelation for Suspended 3D Bioprinting

Agarose Fluid Gels Formed by Shear Processing During Gelation for Suspended 3D Bioprinting

DOI:
10.3791/64458-v

•

07:26 min

•

May 26, 2023

•

, , , , ,
1Department of Pharmacy,University of Huddersfield, 2School of Chemical Engineering,University of Birmingham, 3Chemical and Biological Engineering,University of Colorado Boulder, 4School of Biological Sciences,University of Manchester

Chapters

  • 00:04Introduction
  • 00:48Rheological Characterization of Bioinks
  • 03:36Designing and Printing 3D Structures Using a 3D Bioprinter
  • 05:54Results: Shear Processing During Hydrogel Formation to Produce Microgel Suspensions
  • 06:49Conclusion

Summary

自动翻译

自动翻译

Shear processing during hydrogel formation results in the production of microgel suspensions that shear-thin but rapidly restructure following the removal of shear forces. Such materials have been used as a supporting matrix for bioprinting complex, cell-laden structures. Here, methods used to manufacture the supporting bed and compatible bioinks are described.

Tags

Agarose Fluid GelsShear Processing3D BioprintingBioinksSuspending MediumViscometryRheologyOscillatory TestingLinear Viscoelastic Region

Article

Embed

添加到播放列表

Usage Statistics

Related Videos

Engineering 3D Cellularized Collagen Gels for Vascular Tissue Regeneration

Preparation of 3D Collagen Gels and Microchannels for the Study of 3D Interactions In Vivo

Creation of Cardiac Tissue Exhibiting Mechanical Integration of Spheroids Using 3D Bioprinting

Bioprinting of Cartilage and Skin Tissue Analogs Utilizing a Novel Passive Mixing Unit Technique for Bioink Precellularization

Fabrication of Custom Agarose Wells for Cell Seeding and Tissue Ring Self-assembly Using 3D-Printed Molds

Protocols of 3D Bioprinting of Gelatin Methacryloyl Hydrogel Based Bioinks

3D Bioprinting of Murine Cortical Astrocytes for Engineering Neural-Like Tissue

Large-Scale, Automated Production of Adipose-Derived Stem Cell Spheroids for 3D Bioprinting

Ensemble Force Spectroscopy by Shear Forces

Author Spotlight: Quantitative Characterization of Liquid Photosensitive Bioink Properties for Continuous Digital Light Processing Based Printing

Read Article