/
/
Design and Development of a Three-Dimensionally Printed Microscope Mask Alignment Adapter for the Fabrication of Multilayer Microfluidic Devices
A subscription to JoVE is required to view this content. Sign in or start your free trial.
2,616 Views
•
06:21 min
•
January 25, 2021
DOI:
Summary
Automatically generated
This project allows small laboratories to develop an easy-to-use platform for the fabrication of precise multilayer microfluidic devices. The platform consists of a three-dimensionally printed microscope mask alignment adapter using which multilayer microfluidic devices with alignment errors of <10 µm were achieved.
Read Article
Cite this Article
Garcia, C. R., Ding, Z., Garza, H. C., Li, W. Design and Development of a Three-Dimensionally Printed Microscope Mask Alignment Adapter for the Fabrication of Multilayer Microfluidic Devices. J. Vis. Exp. (167), e61877, doi:10.3791/61877 (2021).
Copy