ジャーナル
/
工学
/
Design and Development of a Three-Dimensionally Printed Microscope Mask Alignment Adapter for the Fabrication of Multilayer Microfluidic Devices
JoVE Journal
工学
このコンテンツを視聴するには、JoVE 購読が必要です。  サインイン又は無料トライアルを申し込む。
JoVE Journal 工学
Design and Development of a Three-Dimensionally Printed Microscope Mask Alignment Adapter for the Fabrication of Multilayer Microfluidic Devices

Design and Development of a Three-Dimensionally Printed Microscope Mask Alignment Adapter for the Fabrication of Multilayer Microfluidic Devices

DOI:
10.3791/61877-v

•

06:21 min

•

January 25, 2021

•

, , ,
1Department of Chemical Engineering,Texas Tech University

章

  • 00:04Introduction
  • 00:42Designing the Microscope Mask Alignment Adapter (MMAA)
  • 01:29Creation of Bilayer Master Mold Using the MMAA (photolithography) and Determination of the Alignment Error
  • 04:40Results: Design, Customization, and Characterization of the Master Molds Fabricated Using MMAA
  • 05:44Conclusion

概要

自動翻訳

自動翻訳

This project allows small laboratories to develop an easy-to-use platform for the fabrication of precise multilayer microfluidic devices. The platform consists of a three-dimensionally printed microscope mask alignment adapter using which multilayer microfluidic devices with alignment errors of <10 µm were achieved.

タグ

3D PrintedMicroscope Mask Alignment AdapterMultilayerMicrofluidic DevicesMaster MoldWafer HolderUpright MicroscopeAlignment MarkersPhoto ResistSpin Coating

Article

Embed

プレイリスト追加

Usage Statistics

関連ビデオ

Design, Fabrication, and Experimental Characterization of Plasmonic Photoconductive Terahertz Emitters

Fabrication and Testing of Microfluidic Optomechanical Oscillators

In Situ Time-dependent Dielectric Breakdown in the Transmission Electron Microscope: A Possibility to Understand the Failure Mechanism in Microelectronic Devices

Thermal Measurement Techniques in Analytical Microfluidic Devices

Fabrication and Operation of Acoustofluidic Devices Supporting Bulk Acoustic Standing Waves for Sheathless Focusing of Particles

Fabrication of Fully Solution Processed Inorganic Nanocrystal Photovoltaic Devices

Solvent Bonding for Fabrication of PMMA and COP Microfluidic Devices

Flow-assisted Dielectrophoresis: A Low Cost Method for the Fabrication of High Performance Solution-processable Nanowire Devices

Design and Fabrication of an Optical Fiber Made of Water

Fabrication of Refractive-index-matched Devices for Biomedical Microfluidics

Read Article