Dergi
/
Mühendislik
/
Patterning of Microorganisms and Microparticles through Sequential Capillarity-assisted Assembly
JoVE Journal
Mühendislik
Bu içeriği görüntülemek için JoVE aboneliği gereklidir.  Oturum açın veya ücretsiz deneme sürümünü başlatın.
JoVE Journal Mühendislik
Patterning of Microorganisms and Microparticles through Sequential Capillarity-assisted Assembly

Patterning of Microorganisms and Microparticles through Sequential Capillarity-assisted Assembly

DOI:
10.3791/63131-v

•

10:17 min

•

November 04, 2021

•

, , ,
1Institute of Environmental Engineering, Department of Civil, Environmental and Geomatic Engineering,ETH Zurich, 2Department of Materials,ETH Zurich

Bölümler

  • 00:04Introduction
  • 01:03Fabrication of the Microfluidic Chip
  • 03:54Bacterial Patterning
  • 06:53Colloidal Patterning
  • 08:10Results: The Analysis of the Colloidal Patterning Process of the Microfluidic Channels
  • 09:29Conclusion

Özet

Otomatik Çeviri

Otomatik Çeviri

We present a technology that uses capillarity-assisted assembly in a microfluidic platform to pattern micro-sized objects suspended in a liquid, such as bacteria and colloids, into prescribed arrays on a polydimethylsiloxane substrate.

Etiketler

MicroorganismsMicroparticlesCapillarity-assisted AssemblyPatterningMicrofluidic ChannelColloidal ParticlesBacteriaPDMSMaterial EngineeringDrug ScreeningSingle-cell Analysis

Article

Embed

ÇALMA LİSTESİNE EKLE

Usage Statistics

İlgili Videolar

Patterning via Optical Saturable Transitions – Fabrication and Characterization

Visualizing Hyporheic Flow Through Bedforms Using Dye Experiments and Simulation

Using Synchrotron Radiation Microtomography to Investigate Multi-scale Three-dimensional Microelectronic Packages

Optical Trap Loading of Dielectric Microparticles In Air

A Method for Obtaining Serial Ultrathin Sections of Microorganisms in Transmission Electron Microscopy

One-Step Approach to Fabricating Polydimethylsiloxane Microfluidic Channels of Different Geometric Sections by Sequential Wet Etching Processes

Drawing and Hydrophobicity-patterning Long Polydimethylsiloxane Silicone Filaments

Study of a Dot-patterning Process on Flexible Materials using Impact Print-Type Hot Embossing Technology

Assembly and Characterization of an External Driver for the Generation of Sub-Kilohertz Oscillatory Flow in Microchannels

Modeling and Experimental Analysis of the Single-Shaft Coaxial Motor-Pump Assembly in Electrohydrostatic Actuators

Read Article