Journal
/
工程学
/
Patterning of Microorganisms and Microparticles through Sequential Capillarity-assisted Assembly
JoVE 杂志
工程学
需要订阅 JoVE 才能查看此.  登录或开始免费试用。
JoVE 杂志 工程学
Patterning of Microorganisms and Microparticles through Sequential Capillarity-assisted Assembly

Patterning of Microorganisms and Microparticles through Sequential Capillarity-assisted Assembly

DOI:
10.3791/63131-v

•

10:17 min

•

November 04, 2021

•

, , ,
1Institute of Environmental Engineering, Department of Civil, Environmental and Geomatic Engineering,ETH Zurich, 2Department of Materials,ETH Zurich

Chapters

  • 00:04Introduction
  • 01:03Fabrication of the Microfluidic Chip
  • 03:54Bacterial Patterning
  • 06:53Colloidal Patterning
  • 08:10Results: The Analysis of the Colloidal Patterning Process of the Microfluidic Channels
  • 09:29Conclusion

Summary

自动翻译

自动翻译

We present a technology that uses capillarity-assisted assembly in a microfluidic platform to pattern micro-sized objects suspended in a liquid, such as bacteria and colloids, into prescribed arrays on a polydimethylsiloxane substrate.

Tags

MicroorganismsMicroparticlesCapillarity-assisted AssemblyPatterningMicrofluidic ChannelColloidal ParticlesBacteriaPDMSMaterial EngineeringDrug ScreeningSingle-cell Analysis

Article

Embed

添加到播放列表

Usage Statistics

Related Videos

Patterning via Optical Saturable Transitions – Fabrication and Characterization

Visualizing Hyporheic Flow Through Bedforms Using Dye Experiments and Simulation

Using Synchrotron Radiation Microtomography to Investigate Multi-scale Three-dimensional Microelectronic Packages

Optical Trap Loading of Dielectric Microparticles In Air

A Method for Obtaining Serial Ultrathin Sections of Microorganisms in Transmission Electron Microscopy

One-Step Approach to Fabricating Polydimethylsiloxane Microfluidic Channels of Different Geometric Sections by Sequential Wet Etching Processes

Drawing and Hydrophobicity-patterning Long Polydimethylsiloxane Silicone Filaments

Study of a Dot-patterning Process on Flexible Materials using Impact Print-Type Hot Embossing Technology

Assembly and Characterization of an External Driver for the Generation of Sub-Kilohertz Oscillatory Flow in Microchannels

Modeling and Experimental Analysis of the Single-Shaft Coaxial Motor-Pump Assembly in Electrohydrostatic Actuators

Read Article