原子力显微镜压痕方案提供了剖析组织或器官的特定细胞的细胞壁在正常或受限生长期间(即缺水)的物理性质的作用的可能性。
这里描述了一种通过原子力显微镜(AFM)与光学倒置荧光显微镜耦合的纳米压痕来表征活拟南芥根表皮细胞细胞壁的物理特性的方法。该方法包括在测量其变形的同时对样品施加受控力,允许量化参数,例如亚细胞分辨率下的细胞壁表观杨氏模量。它需要仔细地机械固定样品,并正确选择压头和压痕深度。虽然它只能用于外部组织,但这种方法允许表征发育过程中植物细胞壁的机械变化,并使这些微观变化与整个器官的生长相关联。
植物细胞被细胞壁包围,细胞壁是由多糖,蛋白质,代谢物和水的相互作用网络组成的复杂结构,其厚度从0.1到几μm不等,具体取决于细胞类型和生长阶段1,2。细胞壁的机械性能在植物的生长中起着至关重要的作用。细胞壁的低刚度值已被提出作为细胞生长和细胞壁扩张的先决条件,并且越来越多的证据表明,所有细胞都感觉到机械力来执行其功能。然而,细胞壁物理性质的变化是否决定了细胞命运2,3,4仍然存在争议。由于植物细胞在发育过程中不会移动,因此器官的最终形状取决于细胞扩张的距离和方向。因此,拟南芥根是研究细胞壁物理性质对细胞扩张影响的良好模型,因为不同类型的扩张发生在根的不同区域。例如,各向异性扩张在伸长区很明显,在表皮细胞中尤其明显5。
这里描述的方法用于使用原子力显微镜(AFM)与倒置荧光相位显微镜6相结合,在活拟南芥根的纳米尺度上表征表皮细胞细胞壁的物理性质。有关AFM技术的广泛修订,请阅读7,8,9。
该协议概述了基于AFM的植物细胞壁弹性测量的基本样品制备方法和通用方法。
图1:使用原子力显微镜(AFM)在拟南芥根中力压痕实验的示意图。 该方案概述了力压痕实验的步骤,从制备底物到牢固地固定根样品(1-2),通过碘化丙啶染色确认根系活力(3),悬臂定位在初级根的细长表皮细胞表面上(4-5),力曲线测量(6)和力曲线处理以计算表观杨氏模量(7-8)。EZ:伸长区。 请点击此处查看此图的大图。
细胞和细胞壁力学对于深入了解力学如何影响生长过程变得越来越重要。随着物理力在固体组织中传播相当长的距离,研究细胞壁物理性质的变化以及它们如何被感知、控制、调整和影响植物的生长正在成为一个重要的研究领域2,3,8。
本文提出了一种研究拟南芥根伸长区细胞壁物理性质的方法。AFM技术?…
The authors have nothing to disclose.
这项研究由CSIC I + D 2018资助,资助号95(Mariana Sotelo Silveira)。CSIC Grupos(Omar Borsani)和PEDECIBA。
1 x Phosphate-Buffered Saline (PBS) | Include sodium chloride and phosphate buffer and is formulated to prevent osmotic shock and maintain water balance in living cells. | ||
AFM software | Bruker, Billerica, MA, USA | ||
Atomic force microscopy (AFM) | BioScope Catalyst, Bruker, Billerica, MA, USA | ||
Catalyst Probe holder-fluid | Bruker, Billerica, MA, USA | CAT-FCH | A probe holder for the Bioscope Catalyst, designed for fluid operation in contact or Tapping Mode. Also compatible with air operation. |
Cryoscopic osmometer; model OSMOMAT 030 | Gonotech, Berlin, Germany | ||
Murashige & Skoog Medium | Duchess Biochemie | M0221 | Original concentration, (1962) |
Optical inverted microscope coupled to the AFM | Olympus IX81, Miami, FL, USA | ||
PEGAMIL | ANAEROBICOS S.R.L., Buenos Aires, Argentina | 100429 | Neutral, non acidic silicone glue |
Petri dishes | Deltalab | 200201.B | Polystyrene, 55 x 14 mm, radiation sterile. |
Propidium iodide | Sigma | P4170 | For root viability test. |
Silicon nitride probe, DNP-10, cantilever A | Bruker, Billerica, MA, USA | DNP-10/A | For force modulation microscopy in liquid operation. Probe tip radius of 20-60 nm. 175-μm-long triangular cantilever, with a spring constant of 0.35 N/m. |
Tweezers | Sigma | T4537 |