Journal
/
Engenharia
/
与超薄切片格金属制造间接使用离心铸造
JoVE Journal
Engenharia
É necessária uma assinatura da JoVE para visualizar este conteúdo.  Faça login ou comece sua avaliação gratuita.
JoVE Journal Engenharia
Indirect Fabrication of Lattice Metals with Thin Sections Using Centrifugal Casting
Please note that all translations are automatically generated. Click here for the English version.

与超薄切片格金属制造间接使用离心铸造

DOI:
10.3791/53605-v

•

08:32 min

•

May 14, 2016

•

, ,
1Department of Mechanical and Energy Engineering,University of North Texas, 2Department of Studio Art,University of North Texas

Capítulos

  • 00:05Título
  • 00:58Planning and Burn-out
  • 02:49Centrifugal Casting: Part 1
  • 05:25Centrifugal Casting: Part 2
  • 06:58Results: Cast Metal Lattices
  • 07:50Conclusion

Summary

Tadução automática

Tadução automática

间接添加剂的制造方法的聚合物的三维打印组合用离心铸造概述为具有0.5mm的壁厚5mm的单元电池的长度制造三维八角体桁架金属（Al和Cu合金）。

Tags

Centrifugal CastingLattice MetalsThin SectionsIndirect FabricationOctet Truss StructureSacrificial PatternInvestment CastingBurnout ProcessMetal AlloyAluminumCopper

Article

Embed

ADICIONAR À PLAYLIST

Usage Statistics

Vídeos Relacionados

多晶硅薄膜太阳能电池电浆增强光捕获

检测和钯的回收，从城市矿山黄金和钴金属使用标有纳米货车车轮形的孔隙新型传感器/吸附剂

环境钚的薄膜弥散形态和生物利用度测量

低温碳纳米管垂直互连的制作兼容半导体技术

对于高伸缩的导线与银纳米线制作方法

基于毛细管的离心微流体装置单分散微滴的大小可控的形成

用胶体光刻制备周期性金 Nanocup 阵列

用斜角沉积法制备高吸收介质的超薄彩色薄膜

斜腔软气动网络驱动器的研制

具有温度控制功能的垂直观测显微镜级的制造

Read Article