为了在铝和铝合金中引入大量的氢,开发了一种新的加氢方法,称为水过程中摩擦。
利用水摩擦(FW)程序,研制出一种铝氢充水的新方法。根据水与非氧化物涂层铝之间的化学反应,此程序可以轻松地将大量氢气引入铝中。
一般来说,铝基合金比钢具有更高的耐环境氢脆性。铝合金对氢脆性高,是由于合金表面的氧化膜阻挡了氢气的进入。为了评估和比较铝合金之间的高脆性敏感性,氢充电通常在机械测试1、2、3、4、5、6、7、8、9、10、11、12、13、14之前进行。 15,16,17.然而,众所周知,氢充铝并不容易,即使使用氢气充电方法,如阴极充电15,湿空气16下缓慢应变率变形,或氢等离子气体充电17。氢充铝合金的难度也在于铝合金表面的氧化膜。我们假设,如果我们能在水中连续去除氧化膜,铝合金中就会引入大量的氢。热力学18,纯铝没有氧化物膜很容易与水反应,并产生氢气。在此基础上,基于水与非氧化物铝的化学反应,开发了铝合金加氢的新方法。该方法能够简单地将大量的氢气添加到铝合金中。
FW 程序的一个重要方面是将两个试样连接到磁力搅拌器。由于搅拌棒的中心成为非摩擦区,因此最好避免在搅拌棒中心附着试样。
控制搅拌杆的旋转速度也很重要。当转速超过 240 rpm 时,很难将反应容器保持在磁力搅拌器的舞台上。高速执行 FW 程序时,需要将反应容器固定到磁搅拌器的阶段。
由于FW程序的氢充电是基于水与非氧化物涂层铝表面之间的化…
The authors have nothing to disclose.
这项工作得到了日本大阪轻金属教育基金会的部分资助。
Air furnace | GC | QC-1 | |
Aluminum alloy plates | Kobe Steel | Al/1.0 mass% Mg/0.8 mass% Si | |
Electric balance | A&D | HR-200 | |
Glass container | Custom made | ||
Magnetic stirrer | CORNING | PC-410D | |
Optical Comparator | NIKON | V-12B | |
pH meter | Sato Tech | PH-230SDJ | |
Quartz tube | Custom made | ||
Rotary polishing machine | IMT | IM-P2 | |
Secondary electrom microscope | JOEL | JSM-5310LV | |
Sensor gas chromatograph | FIS Inc. | SGHA | |
Silicon carbide emery paper | IMT | 531SR | |
Tensile testing machine | Toshin Kogyo | SERT-5000-C | |
Tubular furnace | Honma Riken | Custom made |