This video demonstrates a method for detecting and quantifying peptide transmitters using a capacitive immunoprobe biosensor. The functionalized electrode, coated with antibodies, interacts with peptides of interest, leading to a signal change that allows precise measurement and detection of peptides.
Protocol
1. Capacitive immunoprobe fabrication and functionalization Cut a 25 cm length of perfluoroalkoxy (PFA)-coated platinum wire (see Table of Materials) and strip approximately 5 mm of PFA coating from one end using a scalpel, being careful not to cut into the platinum wire. Insert the stripped end of the platinum wire into a gold-plated 1 mm male connector pin and crimp the connector pin teeth around the stripped end of the platinum wire using needle-nose pliers …