ジャーナル
/
工学
/
Rapid Manufacturing of Thin Soft Pneumatic Actuators and Robots
JoVE Journal
工学
This content is Free Access.
JoVE Journal 工学
Rapid Manufacturing of Thin Soft Pneumatic Actuators and Robots

Rapid Manufacturing of Thin Soft Pneumatic Actuators and Robots

7,193 Views

•

08:47 min

•

November 08, 2019

DOI:

10.3791/60595-v

DOI:
10.3791/60595-v

•

08:47 min
November 08, 2019

•

3 Views
, , , , ,
1Dalio Institute of Cardiovascular Imaging, New York-Presbyterian Hospital,Weill Cornell Medicine, 2Department of Radiology,Weill Cornell Medicine, 3Mechatronics Engineering Department,Kennesaw State University

概要

Automatically generated

This protocol describes a method for rapid manufacturing of soft pneumatic actuators and robots with a thin form factor. The fabrication method starts with lamination of thermoplastic polyurethane (TPU) sheets followed by laser cutting/welding of a two-dimensional pattern to form actuators and robots.

Explore More Videos

Rapid ManufacturingThin Soft Pneumatic ActuatorsRobotsLaser CutterThermoplastic PolyurethaneForce Sensor CalibrationHeat PressTPU FilmsLaser ParametersSquare BalloonActuator Fabrication

Read Article

Cite this Article

Amiri Moghadam, A. A., Caprio, A., Alaie, S., Min, J. K., Dunham, S., Mosadegh, B. Rapid Manufacturing of Thin Soft Pneumatic Actuators and Robots. J. Vis. Exp. (153), e60595, doi:10.3791/60595 (2019).

Download .ris file

Copy

Share Video

.

Copy