Journal
/
Ingenieurwesen
/
Rapid Manufacturing of Thin Soft Pneumatic Actuators and Robots
JoVE Journal
Ingenieurwesen
This content is Free Access.
JoVE Journal Ingenieurwesen
Rapid Manufacturing of Thin Soft Pneumatic Actuators and Robots

Rapid Manufacturing of Thin Soft Pneumatic Actuators and Robots

DOI:
10.3791/60595-v

•

08:47 min

•

November 08, 2019

•

, , , , ,
1Dalio Institute of Cardiovascular Imaging, New York-Presbyterian Hospital,Weill Cornell Medicine, 2Department of Radiology,Weill Cornell Medicine, 3Mechatronics Engineering Department,Kennesaw State University

Kapitel

  • 00:04Titel
  • 00:27Thermoplastic Polyurethane (TPU) Sheet Smoothing
  • 02:05Optimal Laser Parameter Determination
  • 03:12Actuator Fabrication
  • 05:31Stainless Steel Dispensing Needle Bonding and Soft Actuator Characterization
  • 07:05Results: Representative Actuator Preparation
  • 08:21Conclusion

Summary

Automatische Übersetzung

Automatische Übersetzung

This protocol describes a method for rapid manufacturing of soft pneumatic actuators and robots with a thin form factor. The fabrication method starts with lamination of thermoplastic polyurethane (TPU) sheets followed by laser cutting/welding of a two-dimensional pattern to form actuators and robots.

Tags

Rapid ManufacturingThin Soft Pneumatic ActuatorsRobotsLaser CutterThermoplastic PolyurethaneForce Sensor CalibrationHeat PressTPU FilmsLaser ParametersSquare BalloonActuator Fabrication

Article

Embed

ZUR WIEDERGABELISTE HINZUFÜGEN

Usage Statistics

Verwandte Videos

Synthesis and Characterization of High c-axis ZnO Thin Film by Plasma Enhanced Chemical Vapor Deposition System and its UV Photodetector Application

Fabrication Process of Silicone-based Dielectric Elastomer Actuators

SSVEP-based Experimental Procedure for Brain-Robot Interaction with Humanoid Robots

Free-form Light Actuators — Fabrication and Control of Actuation in Microscopic Scale

Additive Manufacturing of Functionally Graded Ceramic Materials by Stereolithography

Fabrication of Soft Pneumatic Network Actuators with Oblique Chambers

Structural Design and Manufacturing of a Cruiser Class Solar Vehicle

Fabrication of Robust Nanoscale Contact between a Silver Nanowire Electrode and CdS Buffer Layer in Cu(In,Ga)Se2 Thin-film Solar Cells

Fabrication of Carbon-Based Ionic Electromechanically Active Soft Actuators

Manufacturing, Control, and Performance Evaluation of a Gecko-Inspired Soft Robot

Read Article