Journal
/
Ingeniería
/
Fabrication of Refractive-index-matched Devices for Biomedical Microfluidics
JoVE Revista
Ingeniería
Se requiere una suscripción a JoVE para ver este contenido.  Inicie sesión o comience su prueba gratuita.
JoVE Revista Ingeniería
Fabrication of Refractive-index-matched Devices for Biomedical Microfluidics

Fabrication of Refractive-index-matched Devices for Biomedical Microfluidics

DOI:
10.3791/58296-v

•

09:54 min

•

September 10, 2018

•

, ,
1Department of Chemical Engineering,University of Utah, 2Huntsman Cancer Institute,University of Utah

Capítulos

  • 00:04Título
  • 00:45Fabrication of the MY133 Microchannel
  • 06:50Testing and Use of the MY133-V2000 Device
  • 07:57Results: Few if any Artifacts are Observed Near the Microchannel-solution Interface with or without Cells in Close Proximity to the Channel Wall
  • 08:45Conclusion

Summary

Traducción Automática

Traducción Automática

This protocol describes the fabrication of microfluidic devices from MY133-V2000 to eliminate artifacts that often arise in microchannels due to the mismatching refractive indices between microchannel structures and an aqueous solution. This protocol uses an acrylic holder to compress the encapsulated device, improving adhesion both chemically and mechanically.

Tags

Refractive Index MatchingMicrofluidicsMicroscopyPDMSMY-133-V-2000UV CuringAcrylicGlass SubstratePDMS Spin CoatingBiomedical Devices

Article

Embed

Añadir a la lista de reproducción

Usage Statistics

Videos relacionados

Fabrication, Operation and Flow Visualization in Surface-acoustic-wave-driven Acoustic-counterflow Microfluidics

Analysis of Contact Interfaces for Single GaN Nanowire Devices

Fabrication and Testing of Microfluidic Optomechanical Oscillators

Fabrication of Gate-tunable Graphene Devices for Scanning Tunneling Microscopy Studies with Coulomb Impurities

Fabrication and Operation of Acoustofluidic Devices Supporting Bulk Acoustic Standing Waves for Sheathless Focusing of Particles

Fabrication of Fully Solution Processed Inorganic Nanocrystal Photovoltaic Devices

Solvent Bonding for Fabrication of PMMA and COP Microfluidic Devices

Scanning Light Scattering Profiler (SLPS) Based Methodology to Quantitatively Evaluate Forward and Backward Light Scattering from Intraocular Lenses

Flow-assisted Dielectrophoresis: A Low Cost Method for the Fabrication of High Performance Solution-processable Nanowire Devices

Atmospheric Pressure Fabrication of Large-Sized Single-Layer Rectangular SnSe Flakes

Read Article