Direct-Coupled Electroretinogram (DC-ERG) for Recording the Light-Evoked Electrical Responses of the Mouse Retinal Pigment Epithelium

Kiyoharu  J. Miyagishima; Congxiao Zhang; Volha  V. Malechka; Kapil Bharti; Wei Li

doi:10.3791/61491

JoVE Journal > Chemistry

Quimica

Direct-Coupled Electroretinogram (DC-ERG) for Recording the Light-Evoked Electrical Responses of the Mouse Retinal Pigment Epithelium

Published: July 14, 2020

doi:

10.3791/61491

Kiyoharu J. Miyagishima¹, Congxiao Zhang*², Volha V. Malechka*³, Kapil Bharti², Wei Li¹

¹Retinal Neurophysiology Section, National Eye Institute,National Institutes of Health, ²Ocular and Stem Cell Translational Research Section, National Eye Institute,National Institutes of Health, ³Human Visual Function Core, National Eye Institute,National Institutes of Health

Summary

Here, we present a method for recording light-evoked electrical responses of the retinal pigment epithelium (RPE) in mice using a technique known as DC-ERGs first described by Marmorstein, Peachey, and colleagues in the early 2000s.

Abstract

The retinal pigment epithelium (RPE) is a specialized monolayer of cells strategically located between the retina and the choriocapillaris that maintain the overall health and structural integrity of the photoreceptors. The RPE is polarized, exhibiting apically and basally located receptors or channels, and performs vectoral transport of water, ions, metabolites, and secretes several cytokines.

In vivo noninvasive measurements of RPE function can be made using direct-coupled ERGs (DC-ERGs). The methodology behind the DC-ERG was pioneered by Marmorstein, Peachey, and colleagues using a custom-built stimulation recording system and later demonstrated using a commercially available system. The DC-ERG technique uses glass capillaries filled with Hank’s buffered salt solution (HBSS) to measure the slower electrical responses of the RPE elicited from light-evoked concentration changes in the subretinal space due to photoreceptor activity. The prolonged light stimulus and length of the DC-ERG recording make it vulnerable to drift and noise resulting in a low yield of useable recordings. Here, we present a fast, reliable method for improving the stability of the recordings while reducing noise by using vacuum pressure to reduce/eliminate bubbles that result from outgassing of the HBSS and electrode holder. Additionally, power line artifacts are attenuated using a voltage regulator/power conditioner. We include the necessary light stimulation protocols for a commercially available ERG system as well as scripts for analysis of the DC-ERG components: c-wave, fast oscillation, light peak, and off response. Due to the improved ease of recordings and rapid analysis workflow, this simplified protocol is particularly useful in measuring age-related changes in RPE function, disease progression, and in the assessment of pharmacological intervention.

Introduction

The retinal pigment epithelium (RPE) is a monolayer of specialized cells that line the posterior segment of the eye and exert critical functions to maintain retinal homeostasis¹. The RPE supports photoreceptors by regenerating their photon-capturing visual pigment in a process called the visual cycle², by participating in the diurnal phagocytosis of shed outer segment tips³, and in the transport of nutrients and metabolic products between photoreceptors and the choriocapillaris⁴^,⁵. Abnormalities in RPE function underlie numerous human retinal diseases, such as age-related macular degeneration⁶, Leber’s congenital amaurosis⁷^,⁸ and Best vitelliform macular dystrophy⁹. As donor eye tissues are often difficult to obtain solely for research purposes, animal models with genetic modifications can provide an alternative way to study the development of retinal diseases¹⁰^,¹¹. Additionally, the emergence and application of CRISPR cas9 technology now permits genomic introductions (knock-in) or deletions (knock-out) in a simple, one-step process surpassing limitations of prior gene targeting technologies¹². The boom in the availability of new mouse models¹³ necessitates a more efficient recording protocol to non-invasively evaluate RPE function.

Measurement of the light-evoked electrical responses of the RPE can be achieved using a direct-coupled electroretinogram (DC-ERG) technique. When used in combination with conventional ERG recordings that measure the photoreceptor (a-wave) and bipolar (b-wave) cell responses¹⁴, the DC-ERG can define how the response properties of the RPE change with retinal degeneration¹⁵^,¹⁶^,¹⁷ or whether RPE dysfunction precedes photoreceptor loss. This protocol describes a method adapted from the work of Marmorstein, Peachey, and colleagues who first developed the DC-ERG technique¹⁶^,¹⁸^,¹⁹^,²⁰ and improves upon the reproducibility and ease of use.

The DC-ERG recording is difficult to perform because of the long acquisition time (9 min) during which any interruption or introduction of noise can complicate the interpretation of the data. The advantage of this new method is that the baselines reach steady state within a shorter amount of time reducing the likelihood that the animal will awaken prematurely from anesthesia and is less prone to bubble formation in the capillary electrodes.

Protocol

This protocol follows the animal care guidelines outlined in the animal study protocol approved by the Animal Care and Use Committee of the National Eye Institute.

1. Importing light stimulation protocols for DC-ERG

NOTE: Follow the directions below to import the light stimulation protocols for the DC-ERG into the ERG system software (Table of Materials). The protocol consists of a 0.5 min pre-stimulus interval, followed by a step of light (10 cd/m²) for 7 min, and ending with a 1.5 min post-stimulus interval. The light intensity of 10 cd/m² (1 log₁₀ cd/m²) was selected since it evokes approximately half the maximal response for all the components of the DC-ERG in WT mice¹⁸^,²¹. The c-wave and fast oscillation are of particular interest as the origins of these electrical responses are well characterized and can be isolated and studied further in vitro RPE models (e.g., iPSC-RPE). The application of other light intensities can extract additional information, for instance, the off response undergoes a reversal of polarity at brighter light stimuli and may show differences at the intensity at which this reversal takes place. The user is free to change the light intensity settings at their discretion.

Open the ERG system software.
Click on Database Center.
Click on Nuevo (provide a new database file name). Click on Save. The popup box will display: “Database created, do you want to connect to the new database file.” Click on Yes. The current database name should now reflect the new file name.
Click on Transfer In in the Database Control Center Window.
Select Supplementary File 1: LightProtocols – TRANSFER.EXP. Click on Open.
Click on Close (Database Control Center) upon completion of the progress bar.
Click on the green Start button.
Click on Nuevo on the Select Patient Window. Create a new patient family name describing the mouse model, enter the date of birth (DOB, mm/dd/yyyy), toggle the gender (M/F) button to the appropriate description. Click on Close to save the experimental details.
Click on Protocols. The dark-adapted ERG and DC-ERG protocols should now be visible.
Lastly, place the Long Flash.col file into the following folder C:ERG User FilesLong Flash.col.

2. Capillary electrode preparation

Cut the 1.5 mm glass capillaries in half by using a ceramic tile (Table of Materials) to score the glass and break them cleanly using a table to provide physical counterforce and to stabilize the glass.
NOTE: Blunt the cut ends as necessary.
Using a Bunsen burner (Table of Materials) allow the heat to make a small bend in the capillary while holding it over the flame with forceps.

3. Filling capillary electrodes

Connect the vacuum desiccator to the laboratory’s vacuum line through an in-line filter (Table of Materials).
Pour 30 mL of Hanks’ Balanced Salt Solution (HBSS) (Table of Materials) into an open 50 mL conical tube and place it (with the cap removed) into the vacuum chamber.
Turn on the vacuum and degas the HBSS while turning on the computer and the recording equipment.
After 5‒10 min turn off the vacuum and use the degassed HBSS to fill a 12 mL syringe through an attached 25 G needle. Use it to fill the bases of the electrode holders taking extra precaution not to introduce bubbles.
1. To do this, remove the threaded screw cap and carefully slide the syringe needle through the silicone rubber gasket to reach the back wall (silver/silver chloride pellet) of the holder.
  NOTE: The silver/silver chloride pellets are advantageous over holders that use silver wire as they provide more surface area resulting in a stable low-noise baseline. However, silver/silver chloride pellets require a liquid interface free from air bubbles to achieve a good connection. Therefore, take great care not to introduce air bubbles during this process.
2. Gradually inject HBSS to fill the entire microelectrode while slowly retracting the syringe needle. Reattach the threaded cap but do not tighten. Reinsert the syringe needle to fill the empty space within the cap with HBSS. Then fill the glass capillary while holding it horizontal to prevent solution from escaping from the other end.
3. Hold the glass capillary from the bent end and slowly insert the opposite end through the loosened cap and then tighten the screw cap into place.
  NOTE: Glass electrodes filled with HBSS maintain lubrication of the mouse’s eye and prevent corneal dehydration that would occur with the use of standard gold loop electrodes.
Position the electrode holders with the capillary electrodes tilted upwards to allow bubbles to flow out. Run the vacuum for 5‒10 min to degas. Gas escaping from the glass and plastic surfaces will push HBSS out from the electrode holders.
Stop and then slowly release the vacuum. Refill the electrode holders and glass capillaries as described previously.
NOTE: Bubbles tend to collect on or near the silicone rubber gasket and can also hide in the grooves of the threaded cap, therefore special attention must be paid to keep these areas bubble-free.
Install and secure the microelectrode holder into the custom-made T-clip/Magnetic ball joint stand (Figure 1A, inset). To make the custom stand for the microelectrode holder, modify a T-clip (5/16”-11/32” OD Tubing) #8 (Table of Materials) by removing the black polyacetal clips on one side. Have the cylinder base of the magnetic ball joints machined in half to adjust the height (Table of Materials). Secure the modified T-clips to the magnetic ball mounting screws with M3 sized nuts.
Place the microelectrode holder into the modified T-clip and hold it tightly in place by sliding in approximately a 1-inch tapered wooden handle made from breaking a cotton tipped cleaning stick (Table of Materials) at an angle. Use the rare earth magnet cylinder base to securely position the customized electrode holder stand onto the metal plate of the stage enabling 360° rotation on a 180° axis.

4. Test electrodes

Pour HBSS into a small container (e.g., the cap of the 50 mL conical tube).
Gently lower the fully assembled, HBSS-filled capillary microelectrodes into the cap containing HBSS to pre-equilibrate the electrodes and place the needle ground electrode (tail/rear leg) and the Ag/AgCl sintered pellet reference electrode (mouth) in the same HBSS to complete the circuit (Figure 1A).
NOTE: Perform all subsequent steps under dim red light. Use a red-light flashlight to position the mouse and capillary electrodes. Remember to completely turn off all light sources prior to beginning the recording.
Select or create an appropriate identifier (family name) to describe the mouse to be tested and select the DC-ERG protocol to be performed by completing the registration according to the following order.
1. Click on Protocols. Select DC-ERG. Click on Run. A dialog box will pop-up: “Current patient is XXX [DOB: XX/XX/XX) Is this correct for the test being performed?” Click on Yes. Then proceed to “Step 1/6.”
Close the doors to the faraday cage.
Display impedance mode by clicking on Impedance and verify that the values for the mouth reference, tail ground, and recording electrodes are acceptable (see Figure 1B).
Test the baseline stability (noise and drift) by clicking on Step (forward arrow) to select Step 4/6 “Long Flash No Light.”
NOTE: The amount of drift observed when the electrodes are placed in the HBSS bath is generally less than 500 µV per 80 s once they have stabilized and is equivalent to the drift observed when the electrodes are connected to the mouse. Thus, the electrical readout of the electrodes in the HBSS bath are an important indicator of the status of the electrodes. The noise, measured as peak-to-peak, is generally ~ 10‒15% greater in the mouse than in the HBSS bath. This is probably due to the addition of motion artifacts from breathing.
Begin viewing the traces by clicking on Avance. The traces should be low noise with a peak-to-peak amplitude <200 µV. A slight drift (<500 µV/80 s) that gradually fades to baseline is acceptable (Figure 1C).

5. Mouse and electrode positioning

Keep the mice overnight in a well-ventilated light-tight box for dark adaptation.
Anesthetize the animals by intraperitoneal injection of ketamine (80 mg/kg) and xylazine (8 mg/kg).
Apply a drop of 0.5% proparacaine HCl topically to anaesthetize the cornea as well as a drop of 2.5% phenylephrine HCl and 0.5% tropicamide to dilate the pupils.
Trim the mouse whiskers with scissors to prevent inadvertent twitching from disturbing the glass capillary electrodes during the recording.
NOTE: The DC-ERG stimulus protocol within the ERG system has several built-in stimulus routines that can be selected by clicking on the Step (forward arrow) or Step (backward arrow). Only Steps 1, 4, and 5 in the software are required to prepare and perform the DC-ERG recording.
In the ERG system software verify that the correct patient is selected. Click on the green Protocols button. Under Protocol Description select DC-ERG. Then click on Run. Verify that this is the correct test being performed by clicking on Yes.
Use Step 1/6 designated Red Light stimulus to turn on the red light inside the dome to help position the mouse and electrodes while observing the changes in impedance.
Place the mouse on a heated recording table and carefully tent the skin of the rear leg using forceps. Hold the needle electrode firmly in one hand and insert it subcutaneously into the rear leg to secure it into place.
Place the reference Ag/AgCl electrode (Table of Materials) inside the mouth so that the sintered pellet rests along the back cheek and is held in place behind the teeth.
NOTE: Gold wire electrodes should not be used as the mouth reference electrode as they have different impedance characteristics and increase the peak-to-peak noise.
Prior to placing the capillary electrodes to the mouse’s eye, hold the electrode holder with the glass capillaries vertical, flick the electrode holder with the index finger to remove any bubbles that may have been introduced. Fill the tip with HBSS using a 25 G needle attached to a syringe and inspect to ensure that there is no air bubble trapped at the tip. Position the electrode holder stand so that the open tip of the HBSS-filled capillaries are in gentle contact with the cornea.
Use special precaution to avoid introducing air bubbles by holding the lubricant eye gel dispenser inverted and discard the initial drops. Place a drop of lubricant eye gel on each eye to maintain conductivity and prevent desiccation during the recording.

6. DC-ERG recording

Click on Step (forward arrow) to select Step 4/6 “Long Flash No Li.”
Click on Impedance. Use the Impedance Checking screen to examine the resistances of the left and right eyes. The impedance values for the recording electrodes at each eye are expected to be similar (~39 kΩ). The impedance values for both the ground and reference electrodes are expected to be less than 10 kΩ).
Click on Avance to view the traces for the left and right eye. Wait for a stable baseline to be achieved (<10 min). Click on Stop to exit the trace preview.
NOTE: Abrupt changes in drift direction or aberrant noise in the recording will not improve with time and will require identifying the capillary electrode that requires attention. The most likely cause is a bubble introduced to the tip of the electrode. Refill the tip with HBSS. Click on Avance again to check the baseline.
Click on Step (forward arrow) to select Step 5/6 “Long Flash 10 cd 7 min."
Click Run to start the recording (Figure 1D).

7. Data export

Select the “Patient” (Family Name) describing the mouse recording to be exported.
Click on Old Tests.
Under Protocol Description select DC-ERG. Click on the green Load button to load the previously acquired data.
Click on Step (forward arrow) to advance to Step 5/6 “Long Flash 10 cd 7 min.”
Click on Export.
Provide the filename (e.g., filename.csv). A valid filename must begin with a letter, followed by letters, numbers, or underscores. Do not use special characters or hyphens. The data analysis program (DCERG_Analysis.exe) requires that table entries meet the requirements for variable names.
Place a checkmark next to Data Table. Next to separator, select Tab. Place checkmarks next to Options (Titles, Vertical), Include All (Steps, Chans, Resultados), Data Columns (Contents, Resultados, Sweeps), and Format (File).
Then click on Export (Figure 1E). This saves the *.csv file to the C:Multifocal folder.

8. Data analysis

Download and install the appropriate runtime installer (Table of Materials)
Download and install the DCERG_Analysis.exe installer.
NOTE: This installs the script that will perform the analysis of the DC-ERG components and creates a shortcut to run the program in the Start Menu folder.
Click on the shortcut created in the Start Menu > Programs folder.
Select the exported data file or files (*.csv) for analysis. Use Ctrl + left click on the mouse to select more than one file.
NOTE: The executable file generates two types of plots: 1) the raw data is plotted with a best fit line indicating the measured drift; 2) the drift corrected response is plotted after being smoothed with a moving average (with a span of ~5 s). From this plot the amplitudes and time-to-peak of the DC-ERG components are identified: c-wave, fast oscillation, light peak, and off response. The data is then exported in table format to excel where each sheet corresponds to a different mouse recording. These sheets are followed by two summary sheets: (i) compiled DC-ERG amplitudes (mV); (ii) compiled DC-ERG time-to-peaks (light onset, t = 0 min).

Representative Results

Figure 2 is a sample dataset from miR-204 ko/ko cre/+ (conditional KO) and wild type (WT) mice. MiR-204 ko/ko cre/+ are mice with a conditional knockout of microRNA 204 in the retinal pigment epithelium. These mice are generated by crossing floxed miR-204 mice (produced by NEIGEF)²² with VMD2-CRE mice²³. MiR-204 is highly expressed in the RPE where it regulates the expression of proteins critical for epithelial function that maintain tight junction integrity (e.g., claudins), the maintenance of potassium homeostasis through the expression of Kir 7.1 potassium channels, and the expression of several visual cycle genes (e.g., LRAT, RPE65)²⁴.

Since abnormal RPE morphology was reported in several RPE-specific Cre expressing mouse lines²⁵, we monitored for normal RPE morphology in Cre expressing mice with the WT phenotype. The structural and functional abnormalities of the miR-204 ko/ko cre+ (conditional KO) mouse retina resemble the features found in miR-204 null mice¹⁵ characterized by hyper autofluorescence (lipofuscin-like deposits) and increased microglia localized to the RPE apical surface. In null mice these changes were accompanied with decreased light-evoked electrical responses of the RPE, with minimal alteration to photoreceptor responses (assessed by retinal ERG). Thus, perturbation of miR-204 expression in miR-204 ko/ko cre/+ mice is also expected to alter the electrical response of the RPE.

In the example presented, a mouse is placed on the heated platform and the electrodes are positioned appropriately prior to lowering the dome. Impedance and drift are checked as previously described using the bath solution. Representative “negative” results are shown in Figure 2A. In Figure 2A (top panel), the trace suffers from minute bubbles in the electrode that increase the peak-to-peak noise in the trace (shaded in blue). In another example (Figure 2A, lower panel), when bubbles detach from the surface of the glass and move along the length of the electrode this causes abrupt changes in the direction of the baseline drift that cannot be compensated by drift subtraction. Figure 2B shows representative “positive” recordings of WT and miR-204 ko/ko cre/+ mice where the bubbles have been eliminated using the vacuum chamber prior to assembling the microelectrodes into the electrode holder stands.

The best fit line to the initial 25 s (green) is calculated and shown in blue (Figure 2B). The drift corrected responses are replotted in Figure 2C along with the identification of the amplitudes of the DC-ERG components. Using the DC-ERG technique described in this protocol animals from both WT and miR-204 ko/ko cre/+ strains can quickly be recorded and analyzed.

The c-wave is composed of two components: a hyperpolarization of the RPE apical membrane due to increased potassium conductance in response to a decrease in potassium in the subretinal space due to photoreceptor activity and a separate contribution originating from inner retinal cells (slow P3 component – reflecting the activity of Müller cells). The fast oscillation provides information regarding the hyperpolarization of the RPE basolateral membrane²⁶, primarily due to changes in the conductance of a Cl transporter called cystic fibrosis transmembrane conductance regulator (CFTR)²⁷. The light peak is thought to originate from a change in the concentration of a photoreceptor driven substance²⁸ that through a second messenger system depolarizes the RPE’s basolateral membrane by modulating the activity of Ca²⁺ dependent Cl channels²¹. Lastly, the off-response is a complex interaction of responses that differ in polarity and vary with light intensity¹⁸.

As expected, reduced expression of K_ir 7.1 K⁺ channels greatly attenuates the c-wave²⁹ and fast oscillation as shown in the averaged responses in Figure 2D, indicating a significant impairment of the RPE’s electrical properties. A summary of the changes in the components of the DC-ERG are provided in Figure 2E. The relative amplitudes of the DC-ERG components (normalized to WT) are plotted against the relative two largest light-evoked a-wave amplitudes (1 cd·s/m²; 10 cd·s/m²) (normalized to WT) and shown in Figure 2F‒H. The reduction in the a-wave response to the brightest light intensity (10cd·s/m²) (Figure 2F‒H, Supplementary Figure S1A,B) suggests a delay in the recovery of sensitivity due to visual cycle impairment (e.g., resulting from reduced LRAT or RPE65 expression as a result of genomic knockout of miR-204²⁴^,³⁰).

Figure 1: The diagram highlights key steps in the DC-ERG protocol. (A) Image of the completed circuit accomplished by lowering the recording (glass capillary microelectrodes), reference, and ground electrodes into the same bath solution. This configuration enables preliminary tests to be run (prior to anesthetizing the mouse) to evaluate the characteristic impedance, noise, and drift. Inset (upper left) showing a side-view schematic of the custom microelectrode holder stand. (B) Representative image of the Impedance Checking Mode showing the appropriate values for electrode impedances. The impedance in the Left and Right eye electrodes should be comparable, within 5 KΩ of each other (e.g., Left eye: 38.7 KΩ vs. Right eye: 40.36 KΩ). The impedance of the mouth reference electrode should be less than 1 KΩ, whereas the tail electrode should be around 2.5 KΩ. (C) Representative image of the preview trace (Step 4/6) is shown. Step 4 (Long Flash No Light) is selected as no light is delivered during the preview of this step. The traces should be low noise and may have a slight drift that gradually fades with time to baseline. Once the traces have achieved a constant drift in both channels and become relatively flat, the actual recording can begin. (D) Using Step 5/6 (Long Flash 10 cd 7 min) after 0.5 min of darkness, a light step of 10 cd/m² is delivered to the mouse for 7 min followed by a return to darkness for 1.5 min. (E) Image of the export parameters used to convert the data to a *.csv file. This precise format is required to run the DC-ERG analysis software. Please click here to view a larger version of this figure.

Figure 2: Representative traces and workflow of DC-ERG analysis. Image of a negative DC-ERG result displaying excessive (A, top panel) peak-to-peak noise and (A, bottom panel) drift. (B) Images of positive DC-ERG recording results from a WT and miR-204 ko/ko cre/+ mouse. Generated plots of the raw traces showing the best fit lines (blue) to the initial 25 s (green) prior to light onset. (C) Plots of the drift corrected DC-ERG responses for the WT and miR-204 ko/ko cre/+ mice shown in B. The amplitudes of the components of the DC-ERG are indicated in the legend. (D) Averaged DC-ERG responses of 3–8 months old WT (n = 6) and miR-204 ko/ko cre/+ (n = 6) mice. The DC-ERG components are labeled on the WT trace and the light stimulation parameters are defined below. (E) Summary of DC-ERG components taken from recordings of WT and miR-204 ko/ko cre/+ mice. Bar plots represent mean, error bars indicate standard error. The relative amplitudes of the (F) c-wave, (G) fast oscillation, and (H) off response are plotted against the relative two largest light-evoked a-wave amplitudes (1 cd·s/m²; 10 cd·s/m²) (normalized to WT). Significance is indicated by asterisks: (Student’s t-test; * = p < 0.05, ** = p < 0.01, *** = p < 0.001). Please click here to view a larger version of this figure.

Supplementary Figure 1: ERG responses of WT and miR-204 ko/ko cre/+ mice. (A) Responses of WT (black) and miR-204 ko/ko cre/+ mice (magenta) to 4 ms flashes of light of increasing intensity: 0.0001 cd·s/m² (n = 5), 0.001 cd·s/m² (n = 5), 0.01 cd·s/m² (n = 3), 0.1 cd·s/m² (n = 3), 1 cd·s/m² (n = 3), 10 cd·s/m² (n = 2). (B) Averaged a-wave amplitude plotted against flash intensity. (C) Averaged b-wave amplitude plotted against flash intensity. (D) Averaged time-to-peak of a-wave responses plotted against flash intensity. (E) Averaged time-to-peak of b-wave responses plotted against flash intensity. For all plots shown error bars indicate SEM. Significance is indicated by asterisks: (Student’s t-test; * = p < 0.05). Please click here to download this figure.

Supplementary Figure 2: Example of a DC-offset in the power line that can be mitigated with the use of a voltage regulator/power conditioner. (A) In the absence of voltage regulation voltage spikes (caused by the use of equipment in an adjacent room e.g., OCT) generate a DC-offset that can interfere with the measurement of the DC-ERG components, especially the light peak. The disruptive offset is magnified on the right. (B) With the voltage regulator/power conditioner enabled the initial spike is still noticeable but the damaging DC-offset is removed. The effect of the voltage regulator/power conditioner is magnified and shown to the right. Please click here to download this figure.

Supplementary Files. Please click here to download these files.

Discussion

Critical Steps

A good DC-ERG recording requires stable electrodes that are free from bubbles that create artifacts and unwanted drift as they are extremely sensitive to outgassing and temperature changes. It is essential that a stable baseline is achieved when the electrodes are placed in the HBSS bath solution before proceeding forward with the mouse recording. Small bubbles tend to collect at the base of the capillary electrode or around the silicone gasket and are difficult to see once the electrode holder is fully assembled. When few bubbles are present, lightly flicking the holder will free them for removal. If there are too many bubbles or the drift or noise cannot be removed, it is often better to disassemble the electrode and start over while carefully inspecting for bubbles at each step of the process.

Modifications and Troubleshooting

The following customizations can be made to the setup (Table of Materials) in order to improve the fidelity of the DC-ERG recordings. Low-noise cables for microelectrode holders can be used to extend the existing cables from the 32-bit amplifier to the recording table. The additional length enables the careful placement and adjustment of the electrode holder without disturbing their position once the Ganzfeld dome is closed. A voltage regulator/power conditioner can be used to eliminate in line noise and power surges generated from lights or equipment in adjacent rooms being turned on and off (Figure S2). Additionally, the tabletop Ganzfeld dome stimulator and the 32-bit amplifier can be placed inside a Faraday cage grounded to the building ground bar to shield against any additional electrical noise.

Limitations of the Method

The DC-ERG can only be recorded faithfully on dark adapted animals meaning that once the light stimulus is turned on there is little that can be done to eliminate undesirable potentials or drift. Another limitation is that the polarity of some of the components of the DC-ERG (light-peak, off-response) is subject to the light intensity used¹⁶. This means that the greatest deviations from WT may occur at intensities not inherently present at the light intensity that this protocol uses (10 cd/m²). To this point, the DC-ERG analysis software was designed assuming a negative off response (a response minimum). Brighter light intensities that result in the reversal of polarity of the off response will require the need to alter the included analysis script file.

Significance

The RPE is involved in the homeostatic maintenance of the retinal environment and plays a critical role in the pathology of several retinal diseases. This method explains in detail how to setup a DC-ERG system to record the RPE electrical response that when performed in conjunction with conventional ERG recordings provides an objective measure of outer retinal and RPE function. These measures of RPE functionality can be used to evaluate transgenic mouse lines displaying degenerative phenotypes or to test for drug-efficacy or drug-induced cytotoxicity to the RPE.

Divulgaciones

The authors have nothing to disclose.

Acknowledgements

This work was supported by NEI intramural funds. The authors sincerely acknowledge Dr. Sheldon Miller for his scientific guidance, technical advice, and expertise in RPE physiology and disease. The authors thank Megan Kopera and the animal care staff for managing the mouse colonies, and Dr. Tarun Bansal, Raymond Zhou, and Yuan Wang for technical support.

Materials

Ag/AgCl (mouth) Electrode	WPI Inc	EP1	Mouth reference electrode for mouse
Ceramic Tile	Sutter Instrument	CTS	Used to cut the glass capillary tube to an appropriate size
Cotton Tipped Cleaning Stick	Puritan Medical Products	867-WC No Glue	To be used as a spacer to improve the fit of the electrode holder assembly
Electroretinogram (ERG) System	Diagnosys LLC	E3 System	Visual electrophysiology system to diagnose ophthalmic conditions in vision research and drug trials
Bunsen Burner	Argos Technologies	BW20002460	Or equivlaent to shape glass under flame
Glass Capillary Tube (1.5 mm)	Sutter Instruments	BF150-75	For filling with HBSS and making contact to the cornea
Hank’s Buffered Salt Solution (HBSS)	Thermo Fisher Scientific Inc	14175-095	Commercially available. Maintain at RT
In-Line Filter	Whatman	6722-5001	To protect vacuum pump from aerosols
Low Noise Cable for Microelectrode Holders	WPI Inc	5372	Suggested for improving the length and placement of the cables and electrode holder assemblies
Magnetic Ball Joint	WPI Inc	500871	For magnetically positioning the electrode holder assembly on the stage
MatLab	Mathworks		MatLab: For editing the analysis software
Matlab Curvefit Toolbox	Mathworks		Toolbox for MatLab (only required for editing the analysis software)
MatLab Compiler	Mathworks		Toolbox for MatLab (only required for editing and re-releasing the analysis software)
MatLab Runtime version 9.5	Mathworks	R2018b (9.5)	Required to run the analysis software: https://www.mathworks.com/products/compiler/matlab-runtime.html
Microelectrode Holders (45 degrees)	WPI Inc	MEH345-15	For holding the capillaries
Needle (25 ga)	Covidien	8881250313	For filling the capillary tubes with HBSS
needle (ground) electrode	Rhythmlink	13mm – one elctrode	Subdermal needle electrode (ground) for mouse (13mm long, 0.4mm diameter needle, 1.5m leadwire)
Regulator/Power Conditioner	Furman	P-1800	Or equivalent to remove DC-offset from noise introduced through power line
Syringe (12 mL)	Monoject	1181200777	For filling the capillary tubes with HBSS
T-clip	Cole-Parmer	06852-20	For electrode holder assembly
Vacuum Desiccator	Bel-Art	420120000	Clear polycarbonate bottom & cover

Pharmacological treatment
Lubricant eye gel	Alcon	0078-0429-47	Helps lubricates corneal surface and maintain electrical contact with capillary electrodes
Phenylephrine Hydrochloride 2.5%	Akorn	17478-201-15	Short acting mydriatic eye drops (for pupil dilation)
Proparacaine Hydrochloride 0.5%	Akorn	17478-263-12	Local anesthetic for ophthalmic instillation
Tropicamide 0.5%	Akorn	17478-101-12	Short acting mydriatic eye drops (for pupil dilation)
Xylazine	AnaSed	sc-362949Rx	Analgesic and muscle relaxant
Zetamine (Ketamine HCl)	VetOne	501072	Anesthetic for intramuscular injections

Referencias

Steinberg, R. H. Interactions between the retinal pigment epithelium and the neural retina. Documenta Ophthalmologica. 60 (4), 327-346 (1985).
Sahu, B., Maeda, A. RPE Visual Cycle and Biochemical Phenotypes of Mutant Mouse Models. Methods in Molecular Biology. 1753, 89-102 (2018).
Mazzoni, F., Safa, H., Finnemann, S. C. Understanding photoreceptor outer segment phagocytosis: use and utility of RPE cells in culture. Experimental Eye Resarch. 126, 51-60 (2014).
Wimmers, S., Karl, M. O., Strauss, O. Ion channels in the RPE. Progress in Retinal Eye Research. 26 (3), 263-301 (2007).
Gundersen, D., Orlowski, J., Rodriguez-Boulan, E. Apical polarity of Na,K-ATPase in retinal pigment epithelium is linked to a reversal of the ankyrin-fodrin submembrane cytoskeleton. Journal of Cell Biology. 112 (5), 863-872 (1991).
Fletcher, E. L., et al. Studying age-related macular degeneration using animal models. Optometry and Vision Science. 91 (8), 878-886 (2014).
Gu, S. M., et al. Mutations in RPE65 cause autosomal recessive childhood-onset severe retinal dystrophy. Nature Genetics. 17 (2), 194-197 (1997).
Marlhens, F., et al. Mutations in RPE65 cause Leber’s congenital amaurosis. Nature Genetics. 17 (2), 139-141 (1997).
Marmorstein, A. D., et al. the product of the Best vitelliform macular dystrophy gene (VMD2), localizes to the basolateral plasma membrane of the retinal pigment epithelium. Proceedings of the National Academy of Sciences U S A. 97 (23), 12758-12763 (2000).
Chang, B. Mouse models for studies of retinal degeneration and diseases. Methods in Molecular Biology. 935, 27-39 (2013).
Collin, G. B., et al. Mouse Models of Inherited Retinal Degeneration with Photoreceptor Cell Loss. Cells. 9 (4), (2020).
Shrock, E., Güell, M. CRISPR in Animals and Animal Models. Progress in Molecular Biology and Translational Science. 152, 95-114 (2017).
Smalley, E. CRISPR mouse model boom, rat model renaissance. Nature Biotechnology. 34 (9), 893-894 (2016).
Benchorin, G., Calton, M. A., Beaulieu, M. O., Vollrath, D. Assessment of Murine Retinal Function by Electroretinography. Bio Protocol. 7 (7), (2017).
Zhang, C., et al. Regulation of phagolysosomal activity by miR-204 critically influences structure and function of retinal pigment epithelium/retina. Human Molecular Genetics. 28 (20), 3355-3368 (2019).
Samuels, I. S., et al. Light-evoked responses of the retinal pigment epithelium: changes accompanying photoreceptor loss in the mouse. Journal of Neurophysiology. 104 (1), 391-402 (2010).
Wu, J., Marmorstein, A. D., Peachey, N. S. Functional abnormalities in the retinal pigment epithelium of CFTR mutant mice. Experimental Eye Research. 83 (2), 424-428 (2006).
Wu, J., Peachey, N. S., Marmorstein, A. D. Light-evoked responses of the mouse retinal pigment epithelium. Journal of Neurophysiology. 91 (3), 1134-1142 (2004).
Peachey, N. S., Stanton, J. B., Marmorstein, A. D. Noninvasive recording and response characteristics of the rat dc-electroretinogram. Visual Neuroscience. 19 (6), 693-701 (2002).
Samuels, I. S., Bell, B. A., Pereira, A., Saxon, J., Peachey, N. S. Early retinal pigment epithelium dysfunction is concomitant with hyperglycemia in mouse models of type 1 and type 2 diabetes. Journal of Neurophysiology. 113 (4), 1085-1099 (2015).
Marmorstein, L. Y., et al. The light peak of the electroretinogram is dependent on voltage-gated calcium channels and antagonized by bestrophin (best-1). Journal of General Physiology. 127 (5), 577-589 (2006).
Zhang, C., et al. Invest. Ophtalmol. Vis. Sci. Annual Meeting for the Association for Research in Vision and Ophthalmology. , 3568 (2017).
Iacovelli, J., et al. Generation of Cre transgenic mice with postnatal RPE-specific ocular expression. Investigative Ophthalmology and Visual Science. 52 (3), 1378-1383 (2011).
Wang, F. E., et al. MicroRNA-204/211 alters epithelial physiology. FASEB Journal. 24 (5), 1552-1571 (2010).
He, L., Marioutina, M., Dunaief, J. L., Marneros, A. G. Age- and gene-dosage-dependent cre-induced abnormalities in the retinal pigment epithelium. American Journal of Pathology. 184 (6), 1660-1667 (2014).
Gallemore, R. P., Steinberg, R. H. Light-evoked modulation of basolateral membrane Cl- conductance in chick retinal pigment epithelium: the light peak and fast oscillation. Journal of Neurophysiology. 70 (4), 1669-1680 (1993).
Blaug, S., Quinn, R., Quong, J., Jalickee, S., Miller, S. S. Retinal pigment epithelial function: a role for CFTR. Documenta Ophthalmologica. 106 (1), 43-50 (2003).
Gallemore, R. P., Griff, E. R., Steinberg, R. H. Evidence in support of a photoreceptoral origin for the “light-peak substance”. Investigative Ophthalmology and Visual Science. 29 (4), 566-571 (1988).
Shahi, P. K., et al. Abnormal Electroretinogram after Kir7.1 Channel Suppression Suggests Role in Retinal Electrophysiology. Science Reports. 7 (1), 10651 (2017).
Li, Y., et al. Mouse model of human RPE65 P25L hypomorph resembles wild type under normal light rearing but is fully resistant to acute light damage. Human Molecular Genetics. 24 (15), 4417-4428 (2015).

Play Video

PDF

DOI

DOWNLOAD MATERIALS LIST

Citar este artículo

Miyagishima, K. J., Zhang, C., Malechka, V. V., Bharti, K., Li, W. Direct-Coupled Electroretinogram (DC-ERG) for Recording the Light-Evoked Electrical Responses of the Mouse Retinal Pigment Epithelium. J. Vis. Exp. (161), e61491, doi:10.3791/61491 (2020).