Journal
/
Ingenieurwesen
/
Evaluation of the Curing of Adhesive Systems by Rheological and Thermal Testing
JoVE Journal
Ingenieurwesen
Zum Anzeigen dieser Inhalte ist ein JoVE-Abonnement erforderlich.  Melden Sie sich an oder starten Sie Ihre kostenlose Testversion.
JoVE Journal Ingenieurwesen
Evaluation of the Curing of Adhesive Systems by Rheological and Thermal Testing

Evaluation of the Curing of Adhesive Systems by Rheological and Thermal Testing

DOI:
10.3791/61468-v

•

09:06 min

•

July 03, 2020

•

, , , , ,
1Escola Politécnica Superior,Universidade da Coruña

Kapitel

  • 00:05Introduction
  • 00:41Manufacturer Curing Condition Checking: Thermogravimetric Cured Sample Testing
  • 01:20Manufacturer Curing Condition Checking: Differential Scanning Calorimetry (DSC) of a Cured Sample
  • 02:29DSC Fresh Sample Analysis: Ramp Curing Test
  • 03:23DSC Fresh Sample Analysis: Isothermal Curing Test
  • 04:47Logarithmic Strain Sweep Test
  • 05:27Isothermal Multifrequency Curing Test
  • 06:22Torque sweep and Temperature Scan Testing
  • 07:18Results: Representative Cured Adhesive System Rheological and Thermal Testing
  • 08:42Conclusion

Summary

Automatische Übersetzung

Automatische Übersetzung

An experimental methodology based on thermal and rheological measurements is proposed to characterize the curing process of adhesives with to obtain useful information for industrial adhesive selection.

Tags

Adhesive SystemsCuring ProcessRheological TestingThermal AnalysisThermogravimetric AnalysisDifferential Scanning CalorimetryQuality ControlAdhesive SelectionCuring StudyHeating-cooling-heating Test

Article

Embed

ZUR WIEDERGABELISTE HINZUFÜGEN

Usage Statistics

Verwandte Videos

Characterization of Surface Modifications by White Light Interferometry: Applications in Ion Sputtering, Laser Ablation, and Tribology Experiments

Fabrication of VB2/Air Cells for Electrochemical Testing

The Preparation of Electrohydrodynamic Bridges from Polar Dielectric Liquids

Making Record-efficiency SnS Solar Cells by Thermal Evaporation and Atomic Layer Deposition

Challenges in Rheological Characterization of Highly Concentrated Suspensions — A Case Study for Screen-printing Silver Pastes

Fabrication of 3D Carbon Microelectromechanical Systems (C-MEMS)

Subsurface Defect Localization by Structured Heating Using Laser Projected Photothermal Thermography

Protocol for the Evaluation of MRI Artifacts Caused by Metal Implants to Assess the Suitability of Implants and the Vulnerability of Pulse Sequences

Combining Microfluidics and Microrheology to Determine Rheological Properties of Soft Matter during Repeated Phase Transitions

Multi-material Ceramic-Based Components – Additive Manufacturing of Black-and-white Zirconia Components by Thermoplastic 3D-Printing (CerAM – T3DP)

Read Article