/
/
One-Step Approach to Fabricating Polydimethylsiloxane Microfluidic Channels of Different Geometric Sections by Sequential Wet Etching Processes
Zum Anzeigen dieser Inhalte ist ein JoVE-Abonnement erforderlich. Melden Sie sich an oder starten Sie Ihre kostenlose Testversion.
One-Step Approach to Fabricating Polydimethylsiloxane Microfluidic Channels of Different Geometric Sections by Sequential Wet Etching Processes
Kapitel
- 00:04Titel
- 01:12Fabrication of Polydimethylsiloxane (PDMS) Channel Layouts
- 03:20Experimental Characterization of PDMS Wet Etching
- 04:36PDMS Sequential Wet Etching for Microfluidic Channels of a Cross-shaped Cross-section
- 05:50Fabrication and Characterization of a Microfluidic Mixer with Different Channel Sections
- 07:08Results: Fabrication of Microfluidic Channels with Different Geometric Sections
- 07:49Conclusion
Several methods are available for the fabrication of channels of non-rectangular sections embedded in polydimethylsiloxane microfluidic devices. Most of them involve multistep manufacturing and extensive alignment. In this paper, a one-step approach is reported for fabricating microfluidic channels of different geometric cross sections by polydimethylsiloxane sequential wet etching.
