Journal
/
Ingenieurwesen
/
A Fabrication and Measurement Method for a Flexible Ferroelectric Element Based on Van Der Waals Heteroepitaxy
JoVE Journal
Ingenieurwesen
Author Produced
Zum Anzeigen dieser Inhalte ist ein JoVE-Abonnement erforderlich.  Melden Sie sich an oder starten Sie Ihre kostenlose Testversion.
JoVE Journal Ingenieurwesen
A Fabrication and Measurement Method for a Flexible Ferroelectric Element Based on Van Der Waals Heteroepitaxy

A Fabrication and Measurement Method for a Flexible Ferroelectric Element Based on Van Der Waals Heteroepitaxy

DOI:
10.3791/57221-v

•

10:40 min

•

April 08, 2018

•

, , , ,
1Key Laboratory of Low Dimensional Materials and Application Technology of Ministry of Education,Xiangtan University, 2Department of Physics,Indian Institute of Science, 3Department of Materials Science and Engineering,National Chiao Tung University

Kapitel

  • 00:00Titel
  • 00:41Fabricate the Flexible PZT Thin Film
  • 02:19Ferroelectric Characterization: Bending Test
  • 04:28Ferroelectric Characterization: Thermal Stability
  • 05:19Ferroelectric Characterization: Bending Cyclability Tests
  • 06:23Results: Ferroelectric Properties Under Bent and High Temperature
  • 08:41Conclusion

Summary

Automatische Übersetzung

Automatische Übersetzung

In this paper, we present a protocol to directly grow an epitaxial yet flexible lead zirconium titanate memory element on muscovite mica.

Tags

Flexible Ferroelectric ElementVan Der Waals HeteroepitaxyPZT Thin FilmMica SubstratePLDSRO Bottom ElectrodePlatinum Top ElectrodeFerroelectric CharacterizationBending Test

Article

Embed

ZUR WIEDERGABELISTE HINZUFÜGEN

Usage Statistics

Verwandte Videos

Fabrication of High Contrast Gratings for the Spectrum Splitting Dispersive Element in a Concentrated Photovoltaic System

Fabrication Process of Silicone-based Dielectric Elastomer Actuators

A Fabrication Method for Highly Stretchable Conductors with Silver Nanowires

Standardized Method for Measuring Collection Efficiency from Wipe-sampling of Trace Explosives

Experimental Implementation of a New Composite Fabrication Method: Exposing Bare Fibers on the Composite Surface by the Soft Layer Method

Fabrication of Flexible Image Sensor Based on Lateral NIPIN Phototransistors

Cutting Procedures, Tensile Testing, and Ageing of Flexible Unidirectional Composite Laminates

Implementation of a Nonlinear Microscope Based on Stimulated Raman Scattering

Fabricating van der Waals Heterostructures with Precise Rotational Alignment

Method Development for Contactless Resonant Cavity Dielectric Spectroscopic Studies of Cellulosic Paper

Read Article