Journal
/
Engineering
/
Modeling and Experimental Analysis of the Single-Shaft Coaxial Motor-Pump Assembly in Electrohydrostatic Actuators
JoVE Journal
Engineering
A subscription to JoVE is required to view this content.  Sign in or start your free trial.
JoVE Journal Engineering
Modeling and Experimental Analysis of the Single-Shaft Coaxial Motor-Pump Assembly in Electrohydrostatic Actuators

Modeling and Experimental Analysis of the Single-Shaft Coaxial Motor-Pump Assembly in Electrohydrostatic Actuators

DOI:
10.3791/63549-v

•

08:59 min

•

June 13, 2022

•

, , , ,
1Research Institute for Frontier Science,Beihang University, 2School of Mechanical Engineering and Automation,Beihang University, 3Laboratory of Aerospace Servo Actuation and Transmission,Beihang University

Chapters

  • 00:05Introduction
  • 01:00Simulation of Pump Flow Characteristics
  • 02:11Establishment of the Experimental Platform
  • 04:40Pump Flow and Testing the Overall Efficiency of Motor-Pump Assembly
  • 06:40Results: Simulation Model in Electrohydrostatic Actuators
  • 08:18Conclusion

Summary

Automatic Translation

Automatic Translation

We built a simulation model to evaluate pump flow characteristics and performance of the single-shaft coaxial motor-pump assembly in electrohydrostatic actuators and investigate the overall efficiency in a wide set of working conditions of the motor-pump assembly experimentally.

Tags

Motor-pump AssemblyElectrohydrostatic ActuatorSimulationExperimental AnalysisPerformance TestingSteady StatePressure SensorTemperature SensorHydraulic Interface

Article

Embed

ADD TO PLAYLIST

Usage Statistics

Related Videos

Experimental Measurement of Settling Velocity of Spherical Particles in Unconfined and Confined Surfactant-based Shear Thinning Viscoelastic Fluids

Real-Time DC-dynamic Biasing Method for Switching Time Improvement in Severely Underdamped Fringing-field Electrostatic MEMS Actuators

Preparation and Use of Photocatalytically Active Segmented Ag|ZnO and Coaxial TiO2-Ag Nanowires Made by Templated Electrodeposition

Fabrication Process of Silicone-based Dielectric Elastomer Actuators

Quantification of Hydrogen Concentrations in Surface and Interface Layers and Bulk Materials through Depth Profiling with Nuclear Reaction Analysis

Using Synchrotron Radiation Microtomography to Investigate Multi-scale Three-dimensional Microelectronic Packages

Free-form Light Actuators — Fabrication and Control of Actuation in Microscopic Scale

Methods of Ex Situ and In Situ Investigations of Structural Transformations: The Case of Crystallization of Metallic Glasses

Fabrication of Soft Pneumatic Network Actuators with Oblique Chambers

Crack Monitoring in Resonance Fatigue Testing of Welded Specimens Using Digital Image Correlation

Read Article