'Dergi'
/
Mühendislik
/
Combining Microfluidics and Microrheology to Determine Rheological Properties of Soft Matter during Repeated Phase Transitions
JoVE Journal
Mühendislik
'Bu içeriği görüntülemek için JoVE aboneliği gereklidir.'  'Oturum açın veya ücretsiz deneme sürümünü başlatın.'
JoVE Journal Mühendislik
Combining Microfluidics and Microrheology to Determine Rheological Properties of Soft Matter during Repeated Phase Transitions

Combining Microfluidics and Microrheology to Determine Rheological Properties of Soft Matter during Repeated Phase Transitions

DOI:
10.3791/57429-v

•

11:38 min

•

April 19, 2018

•

, , ,
1Department of Chemical and Biomolecular Engineering,Lehigh University, 2Process and Engineering Development,Procter & Gamble Co.

'Bölümler'

  • 00:04'Başlık'
  • 00:48Microfluidic Stamp Fabrication and Polydimethylsiloxane (PDMS) Molding
  • 03:58Microfluidic Device Assembly
  • 06:25μ2rheology Procedure
  • 09:22Results: Multiple Particle Tracking (MPT) Microrheology of a Hydrogenated Castor Oil (HCO) Gel System
  • 10:55Conclusion

Özet

'Otomatik Çeviri'

'Otomatik Çeviri'

We demonstrate the fabrication and use of a microfluidic device that enables multiple particle tracking microrheology measurements to study the rheological effects of repeated phase transitions on soft matter.

'Etiketler'

MikroakışkanlarMicrorheologySoft MatterPhase TransitionsRheological PropertiesHeterogeneous SystemsPDMSUV Curable ResinMicrofluidic Device Fabrication

Article

Embed

'ÇALMA LİSTESİNE EKLE'

Usage Statistics

'İlgili Videolar'

Controlling the Size, Shape and Stability of Supramolecular Polymers in Water

Taking Advantage of Reduced Droplet-surface Interaction to Optimize Transport of Bioanalytes in Digital Microfluidics

High-Sensitivity Nuclear Magnetic Resonance at Giga-Pascal Pressures: A New Tool for Probing Electronic and Chemical Properties of Condensed Matter under Extreme Conditions

Patterning via Optical Saturable Transitions – Fabrication and Characterization

Challenges in Rheological Characterization of Highly Concentrated Suspensions — A Case Study for Screen-printing Silver Pastes

Orientational Transition in a Liquid Crystal Triggered by the Thermodynamic Growth of Interfacial Wetting Sheets

Electric-field Control of Electronic States in WS2 Nanodevices by Electrolyte Gating

Studying Large Amplitude Oscillatory Shear Response of Soft Materials

Rapid Manufacturing of Thin Soft Pneumatic Actuators and Robots

Application of a Coupling Agent to Improve the Dielectric Properties of Polymer-Based Nanocomposites

Read Article