Dergi
/
Mühendislik
/
Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer
JoVE Journal
Mühendislik
Bu içeriği görüntülemek için JoVE aboneliği gereklidir.  Oturum açın veya ücretsiz deneme sürümünü başlatın.
JoVE Journal Mühendislik
Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer

Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer

DOI:
10.3791/54923-v

•

08:29 min

•

January 10, 2017

•

, , ,
1Makine Mühendisliği Bölümü,National Institute of Technology, Oyama College, 2Ashizawa Finetech Ltd.

Bölümler

  • 00:05Başlık
  • 01:22Indium Tin Oxide (ITO) Glass Preparation
  • 02:50Preparation and Fabrication of the Photoactive Layer
  • 05:21Fabrication and Measurement of the Solar Cell
  • 06:47Results: Phase Separation and Current–Voltage Characteristics of Ti(IV)-alkoxide Bulk-heterojunction (BHJ) Solar Cells
  • 07:57Conclusion

Özet

Otomatik Çeviri

Otomatik Çeviri

A method for fully printable, fullerene-free, highly air-stable, bulk-heterojunction solar cells based on Ti alkoxides as the electron acceptor and the electron-donating polymer fabrication is described here. Moreover, a method for controlling the morphology of the photoactive layer through the molecular bulkiness of the Ti-alkoxide units is reported.

Etiketler

Organic-inorganic HybridBulk-heterojunction Solar CellsTitanium AlkoxidesMorphology ControlPhase-separationPFO-DVTP3HTPTV7ITO Glass SubstrateHydrochloric Acid EtchingUltrasonic CleaningUV-ozone CleaningChlorobenzeneSpin-coatingAnnealing

Article

Embed

ÇALMA LİSTESİNE EKLE

Usage Statistics

İlgili Videolar

Micropunching Lithography for Generating Micro- and Submicron-patterns on Polymer Substrates

Integrating a Triplet-triplet Annihilation Up-conversion System to Enhance Dye-sensitized Solar Cell Response to Sub-bandgap Light

Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization

Monovalent Cation Doping of CH3NH3PbI3 for Efficient Perovskite Solar Cells

In Situ Monitoring of the Accelerated Performance Degradation of Solar Cells and Modules: A Case Study for Cu(In,Ga)Se2 Solar Cells

Indoor Experimental Assessment of the Efficiency and Irradiance Spot of the Achromatic Doublet on Glass (ADG) Fresnel Lens for Concentrating Photovoltaics

The Modular Design and Production of an Intelligent Robot Based on a Closed-Loop Control Strategy

Installation Method to Enhance Quality Control for Fiber Reinforced Polymer Spike Anchors

O-cresol Concentration Online Measurement Based On Near Infrared Spectroscopy Via Partial Least Square Regression

In Situ Surface Temperature Measurement in a Conveyor Belt Furnace via Inline Infrared Thermography

Read Article