'Dergi'
/
Mühendislik
/
Process of Making Three-dimensional Microstructures using Vaporization of a Sacrificial Component
JoVE Journal
Mühendislik
'Bu içeriği görüntülemek için JoVE aboneliği gereklidir.'  'Oturum açın veya ücretsiz deneme sürümünü başlatın.'
JoVE Journal Mühendislik
Process of Making Three-dimensional Microstructures using Vaporization of a Sacrificial Component

Process of Making Three-dimensional Microstructures using Vaporization of a Sacrificial Component

DOI:
10.3791/50459-v

•

08:31 min

•

November 02, 2013

•

, ,
1'Fizik Bölümü',Kaliforniya Üniversitesi, Irvine, 2'Kimya Bölümü',Kaliforniya Üniversitesi, Irvine

'Bölümler'

  • 00:05'Başlık'
  • 01:19Catalyzing Sacrificial Fibers
  • 03:45Microvascular Gas Exchange Unit Fabrication
  • 06:56Results: Fabrication of Microvascular Structure in a Resin
  • 08:03Conclusion

Özet

'Otomatik Çeviri'

'Otomatik Çeviri'

The Vaporization of a Sacrificial Component (VaSC) process is used to fabricate microvascular structures. This procedure uses sacrificial poly(lactic) acid fibers to form hollow microchannels with precise 3D geometric positioning provided by laser micromachined guide plates.

'Etiketler'

3D MicrostructuresVaporization Of Sacrificial ComponentVascular StructuresSnOx-embedded PLA FibersDepolymerizationMicrochannel FabricationAligned Fiber PatterningComplex 3D Microstructure Design

Article

Embed

'ÇALMA LİSTESİNE EKLE'

Usage Statistics

'İlgili Videolar'

Fabrication, Densification, and Replica Molding of 3D Carbon Nanotube Microstructures

Synthesis of Phase-shift Nanoemulsions with Narrow Size Distributions for Acoustic Droplet Vaporization and Bubble-enhanced Ultrasound-mediated Ablation

High-resolution, High-speed, Three-dimensional Video Imaging with Digital Fringe Projection Techniques

Development of an Experimental Setup for the Measurement of the Coefficient of Restitution under Vacuum Conditions

Fabrication Process of Silicone-based Dielectric Elastomer Actuators

Using Synchrotron Radiation Microtomography to Investigate Multi-scale Three-dimensional Microelectronic Packages

Three-dimensional Particle Tracking Velocimetry for Turbulence Applications: Case of a Jet Flow

Challenges in Rheological Characterization of Highly Concentrated Suspensions — A Case Study for Screen-printing Silver Pastes

Predicting Catalyst Extrudate Breakage Based on the Modulus of Rupture

Three-Dimensional Ultrasonic Needle Tip Tracking with a Fiber-Optic Ultrasound Receiver

Read Article