JoVE Journal > Chemistry
Özet
Abstract
Introduction
Protocol
Sonuçlar
Discussion
Açıklamalar
Acknowledgements
Materials
Referanslar
Kimya

Synthesis of Persistent Luminescent Nanoparticles for Rewritable Displays and Illumination Applications

Published: September 13, 2024
doi:
10.3791/65956
, ,
1School of Physical Science and Technology,Shanghai Tech University

Özet

A protocol is presented for the synthesis of persistent luminescent nanomaterials (PLNPs) and their potential applications in rewritable displays and artistic processing utilizing the afterglow effect under ultraviolet light (365 nm) irradiation.

Abstract

Persistent luminescent nanoparticles (PLNPs) possess the capabilities to maintain extended longevity and robust emission even after the excitation has ceased. PLNPs have been widely used across various domains, including information displays, data encryption, biological imaging, and artistic decoration with sustained and vivid luminosity, providing boundless possibilities for a variety of innovative technology and artistic projects. This protocol focuses on an experimental procedure for the hydrothermal synthesis of PLNPs. The successful synthesis of enduring luminescent nanomaterials with Mn2+ or Cr3+ serving as a luminescent center in Zn2GeO4: Mn (ZGO: Mn) or ZnGa2O4: Cr highlights the universality of this synthetic method. On the other hand, the optical properties of ZGO: Mn can be changed by adjusting the pH of precursor solutions, demonstrating the tunability of the protocol. When charged with ultraviolet (UV) at a wavelength of 365 nm for 3 min and then stopped, PLNPs exhibit the remarkable capacity to generate afterglow efficiently and consistently, which makes them ideal for making two-dimensional rewritable displays and three-dimensional transparent, luminous artworks. This protocol outlined in this paper provides a feasible method for the synthesis of persistent luminescent nanoparticles for further illumination and imaging applications, opening up novel prospects for the fields of science and art.

Introduction

Persistent luminescence (PL) is a unique optical process that can store energy from ultraviolet light, visible light, X-rays, or other excitation sources and then release it in the form of photon emission for seconds, minutes, hours, or even for days1. The discovery of continuous luminous phenomenon originated from the Song dynasty in ancient China 1000 years ago when a painter accidentally discovered a painting that glowed in the dark. It was later found that some natural raw materials and minerals could absorb sunlight and then glow in the dark and can even be made into fascinating glowing pearls2. However, the first adequate record of persistent phosphors needed to be traced back to the discovery of PL emission from Bologna stone in the early 17th century, which gave off a yellow to orange afterglow in the dark1,2,3,4. Later, it was discovered that the natural impurities of Cu+ in BaS played an important role in this persistent luminescence phenomenon1,4. Until the mid-1990s, the production of persistent phosphors was largely limited to sulfides5. In 1996, Matsuzawa et al. reported a new metal oxide (SrAl2O4:Eu2+, Dy3+) phosphor showing extremely bright afterglow, which greatly stimulated the expansion of persistent luminescence research6.

The unique properties of persistent luminescent materials are mainly derived from two kinds of active centers: emission centers and trap centers1,7,8. Among them, the former determines the emission wavelength, while the sustained intensity and time are mainly determined by the trap centers. Therefore, the design of PL materials should take both aspects into consideration in order to achieve the desired emission wavelength and long-lasting luminescence9,10. The emission centers can be lanthanide ions with 5d to 4f or 4f to 4f transitions, transition metal ions with d to d transitions, or post-transition metal ions with p to s transitions1,11,12,13. On the other hand, trap centers are formed by lattice defects or various co-dopants14,15, which usually do not emit radiation but instead store the excitation energy for a while and then gradually release it to the emitting center through thermal or other physical activation16,17. Many phosphors with different hosts and dopant ions have been reported. So far, inorganic metal compounds18, metal-organic frameworks8, certain organic composites19, and polymers20 have been found to have PL properties. In recent years, deep trap persistent luminescent materials with controllable energy storage and photon release properties have shown great potential applications in information storage21, multi-layer anti-counterfeiting22, and advanced displays23.

Based on the above composition, PLNPs with various matrices have been successfully designed and synthesized, such as BaZrSi3O97, Y2O2S24, Ca14Mg2(SiO4)825, CaAl2O426, SrAl2O426,27 , and Sr2MgSi2O728 with multi-doped luminescent centers, in which the luminescence centers strongly depend on the crystal field effect of the host lattice, while the defects generated or improved by different doping serve as auxiliary centers to control the afterglow intensity and duration. In addition to co-doping, long-lasting emission can also be observed in the case of only one activator, such as heterogeneous PLNPs with the matrix of Y3Al2Ga3O1229, BaGa2O430, Ca2SnO431, CdSiO332 , and Zn3Ga2Ge2O1033. Germanate-based ternary oxides include Ca2Ge7O16, Zn2GeO4, BaGe4O9, etc., which are typical wide-bandgap semiconductor materials with tunable emission, reproducible and stable luminescence, high quantum yield, environmental friendliness and wide availability34,35,36. These advantages make it a good activator-type photoluminescent carrier. In the past few years, germanates with various microstructures35,37, have been prepared by conventional solid-state reactions or chemical solution methods, and these characteristics make Zn2GeO4 useful in sterilize38, anti-counterfeiting39, catalysis40, light diodes41 , biosensing42, battery anodes43, detectors44,45, etc.

In order to expand the application of PL materials, the controllable synthesis of uniform and persistent luminescent nanoparticles has been developed. A decade ago, persistent phosphors were synthesized by solid-state synthesis46. However, the long reaction time and high annealing temperature during the synthesis process resulted in large and irregular phosphors, which limited their application in other fields such as biomedicine. In 2007, Chermont et al. used sol-gel approach to synthesize nanoparticles for the first time and prepared Ca0.2Zn0.9Mg0.9Si2O6: Eu2+, Dy3+, Mn2+, which opened the era of PLNPs47. However, the top-down synthesis strategy is accompanied by problems such as uncontrollable size and morphology, so researchers have done a lot of work in the development of controllable bottom-up synthesis of PLNPs. Since 2015, various synthesis methods have emerged one after another, such as the template synthesis method, hydrothermal/solvent thermal method, sol-gel method and other wet chemical synthesis methods for the synthesis of uniform and controllable PLNPs47,48,49,50. Among them, hydrothermal synthesis is one of the most commonly used methods for preparing nanomaterials, which can provide an adjustable and mild synthetic method to prepare compounds or materials with special structures and properties51.

Here, we present a detailed experimental procedure for synthesizing Zn2GeO4: Mn PLNPs with 1D nanorods morphology via the hydrothermal method and providing them with a rigid environment for further illumination applications. It was found that the luminescence properties of PLNPs, including emission wavelength and afterglow decay curve, can be changed by adjusting the pH value of the precursor. On the other hand, to emphasize the versatility of this method, we also synthesize PLNPs with Cr as the luminescent center using ZnGa2O4 as the matrix (ZnGa2O4: Cr), which exhibits afterglow emission (697 nm) in the near-infrared region after being excited by ultraviolet light (365 nm). This article mainly focuses on Zn2GeO4: Mn whose pH value of precursor solution is 9.4 for two-dimensional and three-dimensional artworks production and visualization. Zn2GeO4: Mn is a type of nanomaterial with Mn ions as the luminescent center which obtains strong green light emission (~ 537 nm) under the excitation of 365 nm ultraviolet light. At the same time, the continuous green light can still be seen after stopping excitation. In order to promote the polymerization of PLNPs in methyl methacrylate, ligands (Poly-ethylene glycol) were added during the hydrothermal synthesis process, and then PLNPs were polymerized with methyl methacrylate (MMA) in a two-dimensional or three-dimensional mold so that it can form glowing artwork while smoothly demolding.

This protocol provides a feasible method for the hydrothermal synthesis, polymerization reactions, and luminescent applications of PLNPs in advanced color rendering. Any differences in pH, temperature, and chemical reagents during nanocrystal growth will affect the size and optical properties of PLNP nanostructures. This detailed protocol aims to help new researchers in the field to improve the reproducibility of PLNPs using a hydrothermal method for further wider applications.

Protocol

1. Synthesis of Zn2GeO4: Mn PLNPs

  1. Prepare 2 M/L sodium hydroxide solution by dissolving 10 mM sodium hydroxide in 5 mL of deionized water.
  2. Prepare 0.4 M/L sodium germanate solution by adding 2 mM of germanium oxide into 5 mL of sodium hydroxide solution, and then stir at room temperature for about 30 min.
  3. Add 4 mM of zinc chloride, 0.01 mM of manganese nitrate and 600 µL of nitric acid (65%-68%, wt) to a 100 mL small beaker containing 22 mL of deionized water.
    CAUTION: The addition of nitric acid should be strictly carried out in a fume hood and ensure that there are no open flames or heating around.
  4. Stir vigorously until the solution of step 1.3 is completely dissolved.
  5. Slowly add 2 mM sodium germanate solution to the solution of step 1.4. Add 1 mL of polyethylene glycol (PEG; 300, Mw) to the solution.
  6. Put the calibrated pH meter probe into the solution to monitor the pH value of the reaction system. Set a relatively gentle stirring to avoid splashing of the solution and collision between the stirring bar and the probe.
  7. Add ammonium hydroxide with a mass fraction of 25%-28% to the solution drop by drop, and adjust the pH of the solution to 6.0, 8.0 or 9.4 depending on the luminescence property to be studied. Be sure to add ammonium hydroxide slowly and monitor the pH changes of the solution at all times to prevent the system from being too acidic or too alkaline, so as not to affect the morphology and luminescent properties of nanomaterials.
  8. Cover the beaker with sealing film and stir the solution at room temperature for 1 h. Try not to expose the system to air to prevent dust from entering and causing solvent volatilization, while stirring at a constant speed so that the liquid level of the system will not splash when the system is fully mixed.
  9. Transfer the solution to a Teflon-lined autoclave and place it in an electric thermostatic drying oven at 220 °C for 4 h.
    NOTE: The appropriate Teflon-lined autoclave should be selected according to the volume of the system, and the reactor should be kept clean. The volume of the added raw materials should not exceed 1/3rd of the volume of the autoclave. At the same time, make sure the autoclave is completely closed before placing it into the electric thermostatic drying oven.
  10. Turn OFF the electric thermostatic drying oven when the reaction is completed and wait for the system to cool down to room temperature to take out the reactor. Be sure to wait until the reactor is completely cooled and the pressure is reduced to a safe range before proceeding to the next step to avoid direct contact between high temperature and skin.
  11. Slowly open the reactor and transfer the reaction solution to two 50 mL centrifuge tubes. Rinse the reactor with 40 mL of ethanol, and subsequently transfer the ethanol solution to the same centrifuge tubes.
  12. Vortex for 30 s so that the solution can be mixed evenly, then centrifuge the sample at 4000 x g for 15 min at room temperature and remove the supernatant.
  13. Add 10 mL of deionized water to each centrifuge tube and sonicate for 5 min (240 W, 40 kHz) to redisperse the product.
  14. Add 20 mL of ethanol into each centrifuge tube and vortex for 30 s to mix the solution evenly.
  15. Continue to centrifuge the product according to the setting mentioned before (4000 x g, 15 min) at room temperature and discard the supernatant.
  16. Ultrasonicate for 5 min to disperse the product in 2 mL of methanol solution, seal the sample with sealing film and store it in a 4 °C refrigerator to prevent sample contamination and solvent evaporation for future illumination applications.

2. Synthesis of ZnGa2O4: Cr PLNPs

  1. Dissolve 12 mM Ga(NO3)3.xH2O, 7.2 mM ZnCl2 and 0.024 mM Cr(NO3)3.9H2O in 30 mL of deionized water.
  2. Add 1 mL of PEG (300, Mw) to the solution. Add ammonium hydroxide (25%-28% wt) to the solution, stir gently to reach a pH of 9.0-9.4. Be sure to control the stirring speed so that the solution can mix thoroughly without splashing onto the pH meter.
  3. Cover the beaker with a sealing film and stir the solution at room temperature for 1 h. Try to minimize the exposure of the system to air to prevent dust from entering and solvent evaporation. At the same time, control the stirring speed so that the system does not splash while mixing thoroughly.
  4. Transfer the solution to a Teflon-lined autoclave and run at 220 °C for 6 h. Take out the container after the temperature drops to room temperature. Ensure that the reaction vessel has fully cooled down, and the pressure has dropped to a safe range before proceeding with subsequent operations, as well as avoid direct contact of high temperatures with the skin.
  5. Transfer the reaction solution to two 50 mL centrifuge tubes. Rinse the reactor with 40 mL of ethanol, and then transfer the ethanol solution to the same centrifuge tubes.
  6. Vortex for 30 s to mix the solution and then centrifuge the sample at 4000 x g for 15 min at room temperature and remove the supernatant.
  7. Add 10 mL of deionized water to each centrifuge tube and sonicate for 5 min to redisperse the product.
  8. Add 20 mL of ethanol into each centrifuge tube and vortex for 30 s to mix the solution evenly. Continue centrifuging the product at room temperature as previously mentioned (4000 x g, 15 min) and discard the supernatant.
  9. Ultrasonicate for 5 min to disperse the product in 2 mL of deionized water and seal the sample with a sealing film for storage.

3. Purification for raw materials

  1. Purify methyl methacrylate (MMA) by column chromatography as described below.
    1. Fill half of the column with alkaline aluminum oxide (100-200 mesh) and compact lightly with a glass rod. When filling the column with aluminum oxide, pay attention to even distribution and uniform compaction of the filler to improve separation efficiency.
    2. Add a small amount of MMA and open the PTFE throttle piston below. Once the solvent layer wets the entire aluminum oxide and liquid flows out, add more MMA and repeat this process multiple times. The time when mass ratio of the entire MMA added to the basic aluminum oxide is: 1:50 represents the end of the process.
    3. Place the final collected MMA sample into a glass bottle, seal it with a sealing film and store at 4 °C.
      CAUTION: The entire process should be carried out in a fume hood due to the strong volatility of MMA. At the same time, operators should wear masks and lab coats.
  2. Purify azobisisobutyronitrile (AIBN) by recrystallization as described below.
    1. Prepare a 50 mL of mixed solution with a volume ratio of 7:3 of ethanol and distilled water and heat the solution.
    2. Add 5 g of AIBN when the solution is boiling and stir to mix the solution evenly.
    3. Remove insoluble impurities by hot filtration as described below.
      1. Place the filter paper snugly against the inner wall of the triangular funnel and ensure that the filter paper is below the edge of the funnel.
      2. Place the glass rod against the three-layer section of the filter paper. If the glass rod is not placed against the three-layer section of the filter paper, it may puncture the filter paper, leading to inefficient filtration.
      3. Place the tip of the beaker containing the solution close to the glass rod and pour it while it is hot. The purpose of this step is to prevent splashing liquid droplets.
      4. Rinse the beaker with 10 mL of cold distilled water, and again perform the above filtration process; repeat 3x.
    4. The solution becomes supersaturated due to the decrease in solubility during cooling, resulting in the precipitation of crystals. Put the collected solution in a refrigerator at 4 °C for cooling and crystallization. The sample will appear in the state of white needle-like crystals.
    5. Seal the sample with aluminum foil and store at 4 °C.
      CAUTION Protective measures should be taken during the operation due to the toxicity of AIBN, while also avoiding contact with open flames, high temperatures, and oxidizing agents.

4. Copolymerization of methyl methacrylate (MMA)

  1. Set the water bath temperature to 80 °C.
    NOTE: The temperature of the water has a severe influence on the rate of polymerization and thus affects the final product formation. Therefore, the temperature of the water bath should be strictly guaranteed not to be too high.
  2. Weigh 20 g of MMA into a 100 mL eggplant-shaped bottle. Keep the container dry before the experiment.
    NOTE: The eggplant-shaped bottle is chosen to facilitate the water bath heating and the replacement of air with nitrogen in the system. Try to weigh the sample in a well-ventilated environment while wearing a mask.
  3. Add the pre-prepared methanol solution of Zn2GeO4: Mn into the reaction vessel.
  4. Thoroughly dissolve the sample in MMA with the help of ultrasound for about 10 min (240 W, 40 kHz) at room temperature. Keep the reaction vessel sealed to prevent solvent evaporation and avoid excessively high temperatures during the ultrasonication process.
  5. Add 0.012 g of AIBN to the solution and mix the solution completely.
    NOTE: AIBN should be used under anhydrous conditions and ensure that there is no open flame around the experimental operation. Be sure to wear protective gear.
  6. Place the flask in an 80 °C water bath and purge the air from the reaction system with N2 for approximately 35 min. When the reaction is about to end, gently shake the reaction container. If the solution does not shake vigorously, it proves that the reaction is successful.
    NOTE: The reaction time will change with the temperature of the water bath. Make sure that the temperature of the water bath reaches 80 °C and start timing for 35 min.
  7. After the reaction is over, quickly transfer the reaction vessel to an ice bath to cool it down quickly.
    NOTE: This process should be as fast as possible to avoid excessive pre-polymerization of MMA, and the ice bath can be prepared in advance during the reaction interval.
  8. Slowly pour the solution into a two-dimensional or three-dimensional mold, put the mold into an electric thermostatic drying oven at 40 °C for 10 h, 70 °C for 8 h, and 100 °C for another 2 h to obtain target material.
  9. Close the electric thermostatic drying oven after the reaction stops, and let it cool down to room temperature. Open the electric thermostatic drying oven to take out the mold after the reaction system is sufficiently cooled to avoid skin burns caused by direct contact between high temperature and body.
  10. Carefully remove the mold and expose the polymerized PMMA sample (ZGO: Mn-PMMA) to a UV lamp for about 3 min. For example, when exposing a transparent ZGO: Mn-PMMA film to ultraviolet light through a black cardboard cutout in the shape of the letter H, a corresponding pattern of green phosphorescent emission is obtained. The pattern can be erased after 5 min. Subsequently, the process can be repeated by using another black cardboard cutout in the shape of different letters, generating new luminescent patterns.

Representative Results

The synthesis diagram of Zn2GeO4: Mn (ZGO: Mn) PLNPs is shown in Figure 1. The amphiphilic polymer Poly-ethylene glycol (PEG) is added to modify the ligand-free Zn2GeO4: Mn (ZGO: Mn) nanorods to better dissolve in MMA medium. First, the transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) images of ZGO: Mn whose pH is 9.4 are collected (Figure 1), and then dynamic light scattering (DLS), zeta potential results and X-ray diffraction (XRD) of ZGO: Mn are done (Figure 2). The afterglow spectra and the time-dependent decay curves of ZGO: Mn with different pH (pH = 6.0, 8.0, 9.4) in aqueous solution excited at 365 nm for 3 min, along with photoluminescence images and afterglow images are characterized (Figure 3). The TEM, XRD, afterglow spectra and afterglow attenuation curve of ZnGa2O4: Cr are obtained (Figure 4). The copolymerization diagram of ZGO: Mn whose pH is 9.4 and MMA is shown in Figure 5. The afterglow emission spectra and afterglow intensity as a function of time for the luminescent material based on PMMA (ZGO: Mn-PMMA) can be obtained after irradiating the targets with 365 nm for 3 min and then ceasing excitation. Rewritable display and glow-in-the-dark art processing materials in 2D or 3D molds can be captured by camera upon excitation with UV light at 365 nm for 3 min (Figure 5), which indicates successful polymerization of PLNPs into PMMA matrix for illumination applications.

For obtaining high-resolution, transmission electron microscopy (TEM) images, measurements were performed on transmission electron microscope operated at an acceleration voltage of 200 kV. An XRD system was used to characterize the X-ray diffraction (XRD) data of PLNPs. The afterglow emission spectra and afterglow intensity decay curves as a function of time were carried out using spectrofluorometer. A digital camera was used to record photoluminescence and persistent luminescence images of PLNPs, 2D and 3D luminescent materials.

Figure 1
Figure 1: Synthesis of Zn2GeO4: Mn (ZGO: Mn) PLNPs. (A) The synthesis diagram of ZGO: Mn nanorods. (B) Transmission electron microscopy (TEM) of ZGO: Mn nanostructures whose pH is 9.4. Scale bar: 50 nm. (C) High-resolution transmission electron microscopy (HRTEM) image of ZGO: Mn whose pH is 9.4. Scale bar: 6 nm. Please click here to view a larger version of this figure.

Figure 2
Figure 2: Synthesis of functional Zn2GeO4: Mn nanostructures. (A) Dynamic light scattering (DLS) analysis of Zn2GeO4: Mn-Poly-ethylene glycol (ZGO: Mn-PEG) dispersed in deionized water and a log-normal function fit to obtain the size distribution. (B) Zeta potential results of ZGO: Mn-PEG. (C) X-ray diffraction (XRD) analysis of Zn2GeO4: Mn. Please click here to view a larger version of this figure.

Figure 3
Figure 3: Characterization of ZGO: Mn in aqueous solution. (A) The afterglow emission spectra of ZGO: Mn-PEG with different pH (pH = 6.0, 8.0, 9.4) excited by 365 nm for 3 min. (B) Time-dependent afterglow decay curve of ZGO: Mn in water at 537 nm (excited with 365 nm UV light for 3 min). (C) Photoluminescence images of ZGO: Mn nanorods. (D) Afterglow luminescence decay images of ZGO: Mn. Please click here to view a larger version of this figure.

Figure 4
Figure 4: Characterization of ZnGa2O4: Cr in aqueous solution. (A) TEM images of ZnGa2O4: Cr nanoparticles. Scale bar: 50 nm. (B) XRD analysis of ZnGa2O4: Cr. (C) The afterglow emission spectrum of ZnGa2O4: Cr after 3 min of excitation at 365 nm. (D) Time-dependent afterglow decay curve of ZnGa2O4: Cr in water at 697 nm. Please click here to view a larger version of this figure.

Figure 5
Figure 5: PLNPs for rewritable display and 3D illumination applications. (A) Schematic diagram of the copolymerization reaction between ZGO: Mn whose pH is 9.4 and methyl methacrylate (MMA). (B) The afterglow emission spectrum of ZGO: Mn-PMMA excited by 365 nm for 3 min. (C) The variation of afterglow intensity over time of ZGO: Mn-PMMA at 537 nm (excited with 365 nm UV light for 3 min). (D) Photoactivated afterglow for rewritable display and data storage (written by UV irradiation). (E) Luminescence photographs of transparent 3D duck with ZGO: Mn-PMMA after UV irradiation. Please click here to view a larger version of this figure.

Discussion

This article introduces a synthesis method for persistent luminescent nanomaterials and polymerization for color rendering applications. The materials showed extremely stable optical properties and a visible afterglow after ceasing excitation of ultraviolet light. A persistent luminescent nanomaterial (Zn2GeO4: Mn) was prepared using a hydrothermal method with different pH (Figure 1A). The TEM image showed that ZGO: Mn PLNPs whose pH is 9.4 were rod-shaped with an average diameter of about 65 nm (Figure 1B). The high-resolution TEM images showed good crystallinity of nanomaterials, and the spacing of adjacent lattice fringes parallel to the rod direction was 0.70 nm, which was in good agreement with the (110) plane spacing of Zn2GeO452, indicating that all Zn2GeO4: Mn was highly crystalline (Figure 1C).

In addition, dynamic light scattering (DLS) data of ZGO: Mn in deionized water fitted by a log-normal function showed that the calculated hydrodynamic size was 63 nm in diameter and well dispersed (Figure 2A). The zeta potential results also showed a negative surface of ZGO: Mn (Figure 2B), indicating that the PLNPs had good solubility and stability in aqueous solution. The XRD spectrum of ZGO: Mn can be assigned to the rhombohedral phase of Zn2GeO4 (Figure 2C).

The optical properties of PLNPs could be changed by adjusting the pH of the precursor solution. The afterglow visible emission spectra of ZGO: Mn solution excited at 365 nm for 3 min showed that the PLNPs exhibited a red shift of the main emission peak when the precursor solution changed from acidic to alkaline (Figure 3A). The decay curve of afterglow intensity over time was also affected by the pH value, but in any case, the emission intensity can still be detected when the afterglow time reached 300 s, which verified the successful synthesis of PLNPs with different optical properties (Figure 3B). The photoluminescence images (Figure 3C) and afterglow images (Figure 3D) of PLNPs with different pH levels were captured by the camera. The results revealed that the solution exhibited a brighter green luminescence as the alkalinity of the solution increased.

PLNPs with ZnGa2O4 as the matrix and Cr as the luminescence center (ZnGa2O4: Cr) were synthesized in order to highlight the versatility of this hydrothermal method. The TEM image showed that ZnGa2O4: Cr was smaller in size and uniformly dispersed (Figure 4A). The XRD results indicated that all the diffraction peaks matched well with those of cubic spinel ZnGa2O4 (Figure 4B). The afterglow emission spectrum showed that ZnGa2O4: Cr exhibited obvious near-infrared emission after being excited by ultraviolet light for 3 min (Figure 4C). The emission intensity of ZnGa2O4: Cr at 697 nm was monitored over time, and the results showed that the afterglow emission could still be collected after 300 s (Figure 4D).

There are several key steps in the hydrothermal synthesis of PLNPs. First, it is necessary to strictly control the pH of the aqueous solution during the synthesis of PLNPs. The acidity and alkalinity of the solution can have a dramatic effect on the persistence of the afterglow and even the color of the afterglow. Secondly, when monitoring the pH of the solution, it's important to adjust the appropriate stirring speed to ensure that the stirrer does not collide with the pH probe while the solution is being mixed evenly. Finally, when the solution is stirred for 1 h in an environment with a target pH, keep the reaction system sealed as much as possible to avoid the influence of volatilization of ammonia water.

Furthermore, two-dimensional and three-dimensional luminous artworks are copolymerized by PLNPs and MMA to make PLNPs more functional (Figure 5A). It was found that whether it is a film or a three-dimensional duck, the material shows good afterglow ability (Figure 5B,C). The 2D and 3D materials display bright green luminescence after the cessation of ultraviolet light excitation, and the green afterglow images can still be seen after 5s (Figure 4D,E), which indicates that PLNPs can generate effective afterglow under the activation of the UV lamp.

Some processes need to be paid attention to when performing MMA polymerization. First, the raw materials, i.e., MMA and AIBN, need to be purified so as not to affect the polymerization. The second, when adding methanol dispersed Zn2GeO4: Mn in the MMA solution, ultrasonically disperse the whole system uniformly. Third, remember to observe the state of the solution all the time. It means that the pre-polymerization is successful if the swaying of the flask only causes a slight shaking of the solution. Fourth, the flask should be ice-bathed immediately after the pre-polymerization to prevent excessive polymerization. Finally, the temperature should be programmed during the polymerization reaction in the electric thermostatic drying oven to form a homogeneous matrix.

In summary, we expect that this protocol not only provides a detailed experimental procedure for the hydrothermal synthesis of long-lasting emission nanomaterials but also introduces a method for the copolymerization of PLNPs and MMA to further achieve UV-mediated rewritable and luminescent applications. More importantly, the optical properties of PLNPs can be further tuned to have various colors of afterglow by adjusting different defects, luminescent centers and pH values based on this method. In addition, the method of copolymerization of PLNPs and polymers can be further used in art production. These advantages make PLNPs ideal materials for luminescence and imaging applications. On the other hand, the hydrothermal synthesis method may limit the application of certain materials, especially temperature-sensitive substances since the reaction requires relatively high temperatures. Therefore, the appropriate synthesis method needs to be selected based on specific applications and requirements.

Açıklamalar

The authors have nothing to disclose.

Acknowledgements

The authors thank the funding of the National Natural Science Foundation of China (82001945), the Shanghai Pujiang Program (20PJ1410700), and the starting grant of ShanghaiTech University. The authors thank the Centre for High-resolution Electron Microscopy (ChEM), School of Physical Science and Technology, ShanghaiTech University (No. EM02161943) for the material characterization support. The authors thank the Analytical Instrumentation Center (#SPST-AIC10112914), School of Physical Science and Technology, ShanghaiTech University for the spectral test support and XRD test support. The authors also thank Prof. Jianfeng Li for the help with the material characterizations.

Materials

azobisisobutyronitrile (99%) Macklin A800354 Further purification required
methyl methacrylate(99%) Sigma-Aldrich M55909 Further purification required
deionized water Merck ZEQ7016T0C Milli-Q Direct Water Purification System
alkaline aluminum oxide (100-200 mesh) Macklin A800033
 ammonium hydroxide  (25%-28%, wt) Macklin A801005
beaker  Synthware B220100
chromium(III) nitrate nonahydrate (99.95%) Aladdin C116448
centrifuge ThermoFisher Scientific 75004250
column Synthware C184464CR
digital camera  Canon EOS M50 Mark II
electric thermostaticdrying oven Longyue LDO-9036A
ethanol (99.7%) Greagent 1158566
gallium nitrate hydrate(99.9%) Aladdin G109501
germanium oxide (99.99%) Sinopharm Chemical ReagentCo., Ltd 51009860
glass rod Sinopharm Chemical ReagentCo., Ltd 91229401
powder X-Ray Diffractometer D2 PHASER DESKTOP XRD BRUKER
manganese nitrate (98%) Macklin M828399
methanol (99.5%) Greagent 1226426
nitric acid (65.0-68.0%, wt) Sinopharm Chemical ReagentCo., Ltd 10014508
pH meter Shanghai Leici Sensor Technology Co., Ltd PHS-3C
polyethylene glycol (300, Mw) Adamas 01050882(41713A)
sealing film Parafilm 2025722
sodium hydroxide (GR) Sinopharm Chemical ReagentCo., Ltd 10019764
spectrometer Horiba Fluorolog-3 
transmission electron microscope JEOL  JEM-1400 Plus
transmission electron microscope JEOL 2100 Plus 
triangular funnel Synthware F181975
ultrasound machine centrifuge JP-040S
zinc chloride (98%) Greagent 01113266/G81783A
DOWNLOAD MATERIALS LIST

Referanslar

  1. Xu, J., Tanabe, S. Persistent luminescence instead of phosphorescence: History, mechanism, and perspective. J Luminesc. 205, 581-620 (2019).
  2. Harvey, E. N. . A history of luminescence from the earliest times until 1900. , (1957).
  3. Hölsä, J. Persistent luminescence beats the afterglow: 400 years of persistent luminescence. Electrochem Soc Interface. 18 (4), 42 (2009).
  4. Lastusaari, M., et al. The Bologna stone: history’s first persistent luminescent material. Euro J Mineral. 24 (5), 885-890 (2012).
  5. Liu, Y., Kuang, J., Lei, B., Shi, C. Color-control of long-lasting phosphorescence (LLP) through rare earth ion-doped cadmium metasilicate phosphors. J Mater Chem. 15 (37), 4025-4031 (2005).
  6. Matsuzawa, T., Aoki, Y., Takeuchi, N., Murayama, Y. A new long phosphorescent phosphor with high brightness, SrAl2O4:Eu2+, Dy3+. J Electrochem Soc. 143 (8), 2670 (1996).
  7. Guo, H., et al. Cyan emissive super-persistent luminescence and thermoluminescence in BaZrSi3O9:Eu2+,Pr3+ phosphors. J Mater Chem C. 5 (11), 2844-2851 (2017).
  8. Yuan, J., Dong, J., Lei, S., Hu, W. Long afterglow MOFs: a frontier study on synthesis and applications. Mater Chem Front. 5 (18), 6824-6849 (2021).
  9. Fu, X., Zheng, S., Shi, J., Li, Y., Zhang, H. Long persistent luminescence property of a novel green emitting SrLaGaO4 : Tb3+ phosphor. J Luminesc. 184, 199-204 (2017).
  10. Zhuang, Y., Wang, L., Lv, Y., Zhou, T. L., Xie, R. J. Optical data storage and multicolor emission readout on flexible films using deep-trap persistent luminescence materials. Adv Func Mater. 28 (8), 1705769 (2018).
  11. Singh, S. K. Red and near infrared persistent luminescence nano-probes for bioimaging and targeting applications. RSC Adv. 4 (102), 58674-58698 (2014).
  12. Matuszewska, C., Elzbieciak-Piecka, K., Marciniak, L. Transition metal ion-based nanocrystalline luminescent thermometry in SrTiO3:Ni2+,Er3+ nanocrystals operating in the second optical window of biological tissues. J Phys Chem C. 123 (30), 18646-18653 (2019).
  13. Zhuang, Y., Katayama, Y., Ueda, J., Tanabe, S. A brief review on red to near-infrared persistent luminescence in transition-metal-activated phosphors. Optic Mater. 36 (11), 1907-1912 (2014).
  14. Norrbo, I., et al. Lanthanide and heavy metal free long white persistent luminescence from Ti doped Li-hackmanite: A versatile, low-cost material. Adv Func Mater. 27 (17), 1606547 (2017).
  15. Hoang, K. Defects and persistent luminescence in Eu-doped SrAl2O4. Phys Rev Appl. 19 (2), 024060 (2023).
  16. Viana, B., et al. Long term in vivo imaging with Cr3+ doped spinel nanoparticles exhibiting persistent luminescence. J Luminesc. 170 (3), 879-887 (2016).
  17. Ding, Y., So, B., Cao, J., Langenhorst, F., Wondraczek, L. Light delivery, acoustic read-out, and optical thermometry using ultrasound-induced mechanoluminescence and the near-infrared persistent luminescence of CaZnOS:Nd3. Adv Optic Mater. 11 (17), 2300331 (2023).
  18. Ge, S., et al. Realizing color-tunable and time-dependent ultralong afterglow emission in antimony-doped CsCdCl3 metal halide for advanced anti-counterfeiting and information encryption. Adv Optic Mater. 11 (14), 2300323 (2023).
  19. Zhai, L., Ren, X. M., Xu, Q. Carbogenic π-conjugated domains as the origin of afterglow emissions in carbon dot-based organic composite films. Mater Chem Front. 5 (11), 4272-4279 (2021).
  20. Miao, Q., et al. Molecular afterglow imaging with bright, biodegradable polymer nanoparticles. Nat Biotechnol. 35 (11), 1102-1110 (2017).
  21. Zhou, B., Xiao, G., Yan, D. Boosting wide-range tunable long-afterglow in 1D metal-organic halide micro/nanocrystals for space/time-resolved information photonics. Adv Mater. 33 (16), e2007571 (2021).
  22. Yang, H., et al. Highly flexible dual-mode anti-counterfeiting designs based on tunable multi-band emissions and afterglow from chromium-doped aluminates. J Mater Chem C. 8 (46), 16533-16541 (2020).
  23. Chen, Y., et al. Synaptic plasticity powering long-afterglow organic light-emitting transistors. Adv Mater. 33 (39), e2103369 (2021).
  24. Qu, B., Wang, J., Liu, K., Zhou, R., Wang, L. A comprehensive study of the red persistent luminescence mechanism of Y2O2S:Eu,Ti,Mg. Phys Chem Chem Phys. 21 (45), 25118-25125 (2019).
  25. Zhang, J., Jiang, C. Luminescence properties of Ca14 Mg2(SiO4)8 :Eu2+ from various Eu2+ sites for white-light-emitting diodes. Mater Res Bull. 60, 467-473 (2014).
  26. Yamamoto, H., Matsuzawa, T. Mechanism of long phosphorescence of SrAl2O4: Eu2+, Dy3+ and CaAl2O4 Eu2+, Nd3+. J Luminesc. 72-74, 287-289 (1997).
  27. Rojas-Hernandez, R. E., Rubio-Marcos, F., Rodriguez, M. &. #. 1. 9. 3. ;., Fernandez, J. F. Long lasting phosphors: SrAl2O4:Eu, Dy as the most studied material. Renew Sustain Ener Rev. 81 (2), 2759-2770 (2018).
  28. Lin, Y., Tang, Z., Zhang, Z., Wang, X., Zhang, J. Preparation of a new long afterglow blue-emitting Sr2MgSi2O7-based photoluminescent phosphor. J Mater Sci Lett. 20, 1505-1506 (2001).
  29. Katayama, Y., Viana, B., Gourier, D., Xu, J., Tanabe, S. Photostimulation induced persistent luminescence in Y3Al2Ga3O12:Cr3. Optic Mater Exp. 6 (4), 1405-1413 (2016).
  30. Li, H., et al. A strategy for developing thermal-quenching-resistant emission and super-long persistent luminescence in BaGa2O4:Bi3+. J Mater Chem C. 7 (42), 13088-13096 (2019).
  31. Lei, B., et al. Luminescent properties of orange-emitting long-lasting phosphorescence phosphor Ca2SnO4:Sm3. Solid State Sci. 13 (3), 525-528 (2011).
  32. Lei, B., Liu, Y., Ye, Z., Shi, C. Luminescence properties of CdSiO3:Mn2+ phosphor. J Luminesc. 109 (3-4), 215-219 (2004).
  33. Wu, Y., et al. Near-infrared long-persistent phosphor of Zn3Ga2Ge2O10: Cr3+ sintered in different atmosphere. Spectrochim Acta A Mol Biomol Spectrosc. 151, 385-389 (2015).
  34. Zhang, S., Hu, Y. Photoluminescence spectroscopies and temperature-dependent luminescence of Mn4+ in BaGe4O9 phosphor. J Luminesc. 177, 394-401 (2016).
  35. Wang, J., et al. One-dimensional luminous nanorods featuring tunable persistent luminescence for autofluorescence-free biosensing. ACS Nano. 11 (8), 8185-8191 (2017).
  36. Wang, T., Xu, X., Zhou, D., Qiu, J., Yu, X. Red phosphor Ca2Ge7O16:Eu3+ for potential application in field emission displays and white light-emitting diodes. Mater Res Bull. 60, 876-881 (2014).
  37. Ding, D., et al. X-ray-activated simultaneous near-infrared and short-wave infrared persistent luminescence imaging for long-term tracking of drug delivery. ACS Appl Mater Interfaces. 13 (14), 16166-16172 (2021).
  38. Zhao, X., Wei, X., Chen, L. J., Yan, X. P. Bacterial microenvironment-responsive dual-channel smart imaging-guided on-demand self-regulated photodynamic/chemodynamic synergistic sterilization and wound healing. Biomater Sci. 10 (11), 2907-2916 (2022).
  39. Huang, K., et al. Enhancing light and X-ray charging in persistent luminescence nanocrystals for orthogonal afterglow anti-counterfeiting. Adv Func Mater. 31 (22), 2009920 (2021).
  40. Sun, L., Qi, Y., Jia, C. J., Jin, Z., Fan, W. Enhanced visible-light photocatalytic activity of g-C3N4/Zn2GeO4 heterojunctions with effective interfaces based on band match. Nanoscale. 6 (5), 2649-2659 (2014).
  41. Gupta, S. K., Sudarshan, K., Modak, B., Gupta, R. Interstitial zinc boosted light tunability, afterglow, and ultrabright white emission in zinc germanate (Zn2GeO4). ACS Appl Electron Mater. 5 (2), 1286-1294 (2023).
  42. Calderón-Olvera, R. M., et al. Persistent Luminescence Zn2GeO4:Mn2+ nanoparticles functionalized with polyacrylic acid: One-pot synthesis and biosensing applications. ACS Appl Mater Interfaces. 15 (17), 20613-20624 (2023).
  43. Li, Q., Miao, X., Wang, C., Yin, L. Three-dimensional Mn-doped Zn2GeO4 nanosheet array hierarchical nanostructures anchored on porous Ni foam as binder-free and carbon-free lithium-ion battery anodes with enhanced electrochemical performance. J Mater Chem A. 3 (42), 21328-21336 (2015).
  44. Lai, B., et al. A phosphorescence resonance energy transfer-based "off-on" long afterglow aptasensor for cadmium detection in food samples. Talanta. 232, 122409 (2021).
  45. Chi, F., et al. Multimodal temperature sensing using Zn2GeO4:Mn2+ phosphor as highly sensitive luminescent thermometer. Sens Actuat B: Chem. 296, 126640 (2019).
  46. Yin, S., Chen, D., Tang, W., Peng, Y. Synthesis of CaTiO3:Pr persistent phosphors by a modified solid-state reaction. Mater Sci Eng: B. 136 (2-3), 193-196 (2007).
  47. le Masne de Chermont, Q., et al. Nanoprobes with near-infrared persistent luminescence for in vivo imaging. Proc Natl Acad Sci U S A. 104 (22), 9266-9271 (2007).
  48. Li, Z., Shi, J., Zhang, H., Sun, M. Highly controllable synthesis of near-infrared persistent luminescence SiO2/CaMgSi2O6 composite nanospheres for imaging in vivo. Opt Express. 22 (9), 10509-10518 (2014).
  49. Sera, M., et al. Morphology control and synthesis of afterglow materials with a SrAl2O4 framework synthesized by Surfactant-Template and hydrothermal methods. Chem Phys Lett. 780, 138916 (2021).
  50. Kim, J., Lee, C. K., Kim, Y. J. Low temperature synthesis of Lu3Al5-xGaxO12:Ce3+,Cr3+ powders using a sol-gel combustion process and its persistent luminescence properties. Optic Mat. 104, 109944 (2020).
  51. Xu, Z., et al. Ln(3+) (Ln = Eu, Dy, Sm, and Er) ion-doped YVO(4) nano/microcrystals with multiform morphologies: hydrothermal synthesis, growing mechanism, and luminescent properties. Inorg Chem. 49 (4), 6706-6715 (2010).
  52. Wang, Y., et al. Zn2GeO4−x/ZnS heterojunctions fabricated via in situ etching sulfurization for Pt-free photocatalytic hydrogen evolution: interface roughness and defect engineering. Phys Chem Chem Phys. 22 (18), 10265-10277 (2020).

Etiketler

Persistent Luminescent NanoparticlesPLNPsHydrothermal SynthesisBioimagingDisease TreatmentNano CompositesLuminescence PropertiesPhosphorescent LifetimesTemperature-sensitive LuminescenceImmune ImagingAcoustic MaterialsMagnetic Responsive MaterialsOrganic PhosphorescenceExperimental Procedure

Play Video
PDF
DOI
DOWNLOAD MATERIALS LIST
Bu Makaleden Alıntı Yapın
Hu, Q., Li, R., Zhu, X. Synthesis of Persistent Luminescent Nanoparticles for Rewritable Displays and Illumination Applications. J. Vis. Exp. (211), e65956, doi:10.3791/65956 (2024).
Atıfı İndir
Tekrar Baskılar ve İzinler

View Video

✖

To prove you're not a robot, please enter the text in the image below

CAPTCHA Image
Play CAPTCHA Audio
Refresh Image