JoVE Journal > Chemistry
Özet
Abstract
Introduction
Protocol
Sonuçlar
Discussion
Açıklamalar
Acknowledgements
Materials
Referanslar
Kimya

Formation of Ordered Biomolecular Structures by the Self-assembly of Short Peptides

Published: November 21, 2013
doi:
10.3791/50946
,
1Institute of Chemistry and The Center for Nanoscience and Nanotechnology,Kudüs İbrani Üniversitesi

Özet

This paper describes the formation of highly ordered peptide-based structures by the spontaneous process of self-assembly. The method utilizes commercially available peptides and common lab equipment. This technique can be applied to a large variety of peptides and may lead to the discovery of new peptide-based assemblies.

Abstract

In nature, complex functional structures are formed by the self-assembly of biomolecules under mild conditions. Understanding the forces that control self-assembly and mimicking this process in vitro will bring about major advances in the areas of materials science and nanotechnology. Among the available biological building blocks, peptides have several advantages as they present substantial diversity, their synthesis in large scale is straightforward, and they can easily be modified with biological and chemical entities1,2. Several classes of designed peptides such as cyclic peptides, amphiphile peptides and peptide-conjugates self-assemble into ordered structures in solution. Homoaromatic dipeptides, are a class of short self-assembled peptides that contain all the molecular information needed to form ordered structures such as nanotubes, spheres and fibrils3-8. A large variety of these peptides is commercially available.

This paper presents a procedure that leads to the formation of ordered structures by the self-assembly of homoaromatic peptides. The protocol requires only commercial reagents and basic laboratory equipment. In addition, the paper describes some of the methods available for the characterization of peptide-based assemblies. These methods include electron and atomic force microscopy and Fourier-Transform Infrared Spectroscopy (FT-IR). Moreover, the manuscript demonstrates the blending of peptides (coassembly) and the formation of a "beads on a string"-like structure by this process.9 The protocols presented here can be adapted to other classes of peptides or biological building blocks and can potentially lead to the discovery of new peptide-based structures and to better control of their assembly.

Introduction

Nature forms ordered and functional structures by the process of biomolecular self-assembly. Understanding the forces that govern this spontaneous process may lead to the ability to mimic self-assembly in vitro and consequently to major advances in the area of material sciences10,11. Peptides, specifically, hold great promise as a biomolecular building block, since they present large structural diversity, ease of chemical synthesis, and can easily be functionalized with biological and chemical entities. The field of peptide self-assembly was pioneered by Ghadiri and his colleagues, who demonstrated the self-assembly of peptide nanotubes by cyclic peptides with alternating D- and L-amino acids12. Other successful approaches to the design of peptide assemblies include linear bolaamphiphile peptides5, amphiphiles (AP)6, nonconjugated self-complementary ionic peptides13, surfactant-like peptides4,14, and diblock copolypeptides15.

A more recent approach involves the self-assembly of short aromatic peptides, termed homoaromatic dipeptides. These peptides comprise only two amino acids with aromatic nature (e.g. Phe-Phe, tert-butyl dicarbonate (Boc)-Phe-Phe)7,8,16-21. The structures formed by these homoaromatic peptides include tubular structures, spheres, sheet-like assemblies and fibers6,8,15,21-32. The fibers in some cases generate a fibril mesh that yields a hydrogel33-37. These assemblies have been exploited for applications of biosensing, drug delivery, molecular electronics, etc.38-45

This paper describes the experimental steps needed in order to start the spontaneous self-assembly of homoaromatic peptides. In addition, it presents the process of peptide coassembly. This process involves the self-assembly of more than one type of peptide monomer.

Our demonstration includes the coassembly of two commercially available peptides: the diphenylalanine peptide (NH2-Phe-Phe-COOH) and its Boc protected analogue (Boc-Phe-Phe-OH). Each of the peptides self-assembles into a supermolecular structure: the diphenylalanine peptide forms tubular assemblies and the Boc-Phe-Phe-OH peptide self-assembles into either spheres or fibers depending on the solvent7,17,46. We blended the two peptides in certain ratios and characterized the resulted assemblies by electron microscopy, force microscopy and FT-IR spectroscopy. The methods demonstrated the formation of a peptide-based structure which is comprised of spherical elements with a diameter of several microns (1-4 μm) that are connected by elongated assemblies with a diameter of a few hundred nanometers (~300-800 nm). The assemblies resemble beaded strings in their morphology, as the spherical structures seem to be threaded on the elongated assemblies. We therefore termed these assemblies "biomolecular necklaces". The "biomolecular necklaces" might serve as a new biomaterial, as a drug delivery agent or as a scaffold for electronic applications. Moreover, the procedure that leads to the self-assembly of peptides may be utilized with other classes of peptides and biomolecules. It may lead to a better understanding of the forces involved in self-assembly and the formation of new ordered structures.

Protocol

1. Self-assembly of Homoaromatic Dipeptides

  1. Weigh the desired peptide in its lyophilized form (e.g. NH2-Phe-Phe-OH, Boc-Phe-Phe-COOH) and prepare a stock solution by dissolving the peptide in 1,1,1,3,3,3-hexafluoro-2-propanol (HFP) to the appropriate concentration (e.g. 100 mg/ml for NH2-Phe-Phe-OH and Boc-Phe-Phe-COOH)7,17,46.
  2. Mix the solution using vortex and place on the bench until the peptide is completely dissolved and the solution seems clear (a few minutes).
  3. Dilute the peptide stock solution, with a suitable solvent, to the appropriate concentration (e.g. 2 mg/ml of NH2-Phe-Phe-OH in triple distilled water (TDW) for the formation of nanotubes; by adding 2 μl of the peptide stock solution to 98 μl TDW, 5 mg/ml of Boc-Phe-Phe-COOH in ethanol for the formation of spherical structures).
  4. Keep the solution at RT for 24 hr.
  5. In order to avoid any preaggregation, prepare fresh stock solutions for each experiment.

2. Coassembly of Two Homoaromatic Dipeptides

  1. Prepare a solution of 50% ethanol by mixing equal volumes of TDW and absolute ethanol. Use vortex to mix the two solutions.
  2. Weigh 2 mg of the NH2-Phe-Phe-OH peptide and 1 mg of the Boc-Phe-Phe-OH peptide. Dissolve each peptide in HFP to a concentration of 100 mg/ml.
  3. Mix the peptides stock solutions using vortex and place them on the bench until the peptides are completely dissolved and the solutions seem clear.
  4. Blend the peptides stock solutions to the desired ratio. In this specific experiment blend 10 μl of the NH2-Phe-Phe-OH peptide with 6 μl of the Boc-Phe-Phe-OH peptide (to a final ratio of 5:3 respectively). Due to the high volatility of the HFP solvent, it is recommended to prepare a large amount of this stock solution (at least 10 μl).
  5. Use vortex to mix the blended peptides stock solution.
  6. Dilute the blended peptides stock solution with 50% ethanol to the desired final concentration. In this specific experiment, in order to obtain a final concentration of 5 mg/ml for NH2-Phe-Phe-OH and 3 mg/ml for Boc-Phe-Phe-OH respectively, add 8 μl of the blended peptides stock solution to 92 μl of the 50% ethanol solution. Use a pipette to gently mix the solution.
  7. Keep the solution at RT for 24 hr.
  8. It should be noted that due to the highly volatile nature of the solvent, the experiments are sensitive to small changes in the concentration of the peptides. Therefore, fresh stock solutions should be prepared for each experiment.

3. Characterization of the Self Assembled Structures Using Scanning Electron Microscopy (SEM)

  1. After 24 hr of incubation, apply a 10 μl drop of the peptides solution on a glass cover slip and dry at RT.
  2. Coat the sample on the glass with a thin layer of gold (a few nanometers) using a sputter coater for 90 sec.
  3. Image the assemblies using SEM operating at 10-20 kV.

4. Characterization of the Self Assembled Structures Using Transmission Electron Microscopy (TEM)

  1. Place a 10 μl drop of the peptides solution on a 200-mesh copper grid covered with carbon and stabilized by a polymer film support.
  2. After 1 min remove the excess fluid using filter paper.
  3. Prepare a solution of 2% uranyl acetate in TDW. Filter the solution using 0.22 μm filter unit.
  4. To stain the sample (negative staining), place a drop of 10 μl uranyl acetate solution on the grid.
  5. After 30 sec remove excess fluid using filter paper. It should be noted that although negative staining improves the contrast of the images, it is not essential in all cases.
  6. Image the sample on the grid by TEM operating at 120 kV.

5. Three-dimensional Characterization of the Assemblies by Atomic Force Microscopy (AFM)

  1. Prepare a sample for the AFM analysis using the procedure described in paragraph 3.1.
  2. Analyze the sample on the glass using an AFM instrument working in AC mode. Use silicon cantilevers with a spring constant of 3 N/m and a resonant frequency of 75 kHz.
  3. Start by scanning a large area of the grid, in order to find the desired structure. Then focus on a specific smaller area and scan it (the scan size was 2.5 μm x 2.5 μm for the image included in this manuscript).

6. Characterization of the Secondary Structure by FT-IR

  1. Apply a 30 μl drop of the peptides solution to a CaF2 window.
  2. Allow the solution to dry at RT.
  3. The adsorption of water in the IR spectrum is at 1,650 cm-1. This peak is at the center of the amide I band of the peptide bond. It is also a typical peak for α-helical structures of peptides and proteins47. In order to overcome this problem and avoid the signal of water, a hydrogen-to-deuterium exchange must be performed. Place a drop of deuterium oxide (D2O) on the dried peptide sample. The drop should be large enough to completely cover the peptide deposit on the window.
  4. Allow the sample to dry under vacuum.
  5. Repeat steps 6.3 and 6.4 2x to ensure maximal hydrogen-to-deuterium exchange. Save the sample under vacuum until its analysis.
  6. Record the FT-IR spectra using a deuterated triglycine sulfate (DTGS) detector. The FT-IR system includes a purge gas generator, in order to prevent humidity in the surroundings of the sample. For samples of short peptides, it is best to scan the sample 2,000x at a resolution of 4 cm-1. The transmittance minimal values can be determined by the software supplied with the instrument.

Representative Results

This paper describes a method for the formation of ordered structures at the nano-and micrometer scale by the self-assembly of peptides. In order to demonstrate this simple process we present and characterize the coassembly of two simple aromatic peptides (Figure 1). One of the peptides is the NH2-Phe-Phe-OH (diphenylalanine) peptide, which can self-assemble in an aqueous solution into hollow tubular structures with nanometric dimensions7. The other peptide is its Boc protected analogue, Boc-Phe-Phe-OH. This peptide can form fibrillar structures in aqueous solutions and spherical assemblies in ethanol17,46. We assumed that these peptides would coassemble into a structure that combines the two elements mentioned. Using SEM analysis, we revealed that the blended peptides formed an architecture of spherical assemblies with a diameter of several microns connected by elongated structures with a diameter of a few hundred nanometers (Figure 2). Due to the high resemblance in morphology to beaded strings, we termed these structures "molecular necklaces". AFM analysis of these structures clearly demonstrated their three-dimensional arrangement (Figure 3). In addition, SEM analysis of different regions of various samples indicated that this process occurred with high yield (Figure 2b).

FT-IR analysis provided information on the secondary structure of the peptides assemblies. The absorbance spectrum of the amide I band of the spherical assemblies formed by the peptide Boc-Phe-Phe-OH (5 mg/ml, 50% ethanol) showed a single amide I peak at 1,657 cm-1 indicating an α helix conformation. The tubular structures formed by the NH2-Phe-Phe-OH peptide (2 mg/ml, 50% ethanol) showed two distinctive peaks, one at 1,613 cm-1 and the other at 1,682 cm-1. These peaks correlated with a β-sheet secondary structure. The FT-IR spectrum of the biomolecular necklaces, formed by the coassembly of the two peptides, differed from the assignment for each individual peptide as it comprised two peaks: one peak at 1,653 cm-1 which corresponds with an α helix structure and another peak at 1,684 cm-1 which relates to a β-turn conformation (Figure 4)48. The difference between the various spectra indicates a unique structure for biomolecular necklaces.

Figure 1
Figure 1. Coassembly of the peptides NH2-Phe-Phe-OH and Boc-Phe-Phe-OH. Schematic illustration of the coassembly process.

Figure 2
Figure 2. Electron microscopy analysis of the molecular necklaces; A) and B) SEM micrographs; C) A TEM micrograph.

Figure 3
Figure 3. Three-dimensional AFM topography image of the molecular necklaces.

Figure 4
Figure 4. FT-IR analysis of the different self-assembled structures. FT-IR spectrum obtained from the sample of the spheres formed by Boc-Phe-Phe-OH (red), the tubular structures formed by NH2-Phe-Phe-OH (green) and the molecular necklaces formed by the coassembly of these two peptides (purple).

Discussion

In summary, this paper demonstrates the ease in which peptide-based assemblies can be formed in vitro. The process involves commercially available peptides and solvents, and it occurs spontaneously under ambient conditions, upon the addition of a polar solvent to the test tube. It is crucial to use HFP as a solvent of the peptides, due to the low solubility of the peptides in other organic solvents. In addition, due to the high volatility of HFP it is necessary to prepare fresh stock solution for each experiment. Moreover, the volume of the stock solution should be higher than 10 μl and the transfer of the dissolved peptide into the polar solvent (water) should be done quickly.

It should be noted that this method for the solvation and self-assembly of the peptide is one possible approach, typically used for these aromatic peptides. Other approaches, however, are possible. In addition, the concentration of the stock solution of the peptide in HFP is high in these experiments in order to minimize the concentration of HFP in the final solution.

This manuscript also presents some of the major techniques for the characterization of peptide-based structures, such as AFM, TEM, SEM, and FT-IR. Using microscopy techniques it is possible to obtain information on the morphology of the assemblies. Since the dimensions of these assemblies range from hundreds of nanometers to several microns, it is sufficient to use standard electron microscopy for their characterization. Ultra-high resolution microscopes would be useful for structures that are less than 100 nm in diameter and when imaging without a conductive coating (e.g. gold) is desired. In some cases, the charging of the structures by the electron beam of the electron microscope may occur due to the organic nature of the structure. This can be solved by lowering the voltage of the operating system.

Additional analysis, FT-IR spectroscopy, is a medium resolution method that provides information on the secondary structure of the assemblies. In this manuscript, the measurements were performed on dry samples, however it is possible to study the structure of the assemblies in the solution phase using a fluid cell.

Taken together, the approach presented here for the self-assembly of peptides can be adapted to other classes of peptides and might lead to a better understanding of the forces and interactions during the process. In addition, it can also lead to the formation of new biomolecular assemblies.

Açıklamalar

The authors have nothing to disclose.

Acknowledgements

This work was supported by the Marie Curie International Reintegration Grant and by the German-Israel Foundation. We acknowledge Mr. Yair Razvag for AFM analysis.

Materials

Name of Material/ Equipment Company Catalog Number Comments/Description
NH2-Phe-Phe-OH Bachem G-2925.0001
Boc-Phe-Phe-OH Bachem A-3205.0005
1,1,1,3,3,3-hexafluoro-2-propanol Sigma-Aldrich 52512-100ML
Ethanol absolute (Dehydrated) AR sterile Bio-Lab Ltd. 52555 Blending with TDW for the preparation of 50% solution
Uranyl acetate Sigma-Aldrich 73943 For negative staining. It is possible to work without it.
glass cover slip Marienfeld Laboratory Glassware 110590
TEM grids Electron Microscopy Sciences FCF200-Cu-50 Formvar/Carbon 200 Mesh, Cu
Quantitive filter paper Whatman 1001055
Deuterium Oxide (D2O) Sigma-Aldrich 151882-100G 99.9 atom % D
CaF2 window PIKE Technologies 160-1212 25 mm x 2 mm window. For FT-IR measurments
AFM tips NanoScience Instruments CFMR Aspire probes, CFMR-25 series
Filter units Millipore SLGV033RS Millex-GV, 0.22 μm, PVDF, 33 mm, gamma sterilized
SEM FEI Quanta 200 ESEM
TEM FEI Tecnai T12 G2 Spirit
AFM JPK Instruments A JPK NanoWizard3
FT-IR Thermo Fisher Scientific Nicolet 6700 advanced gold spectrometer
FT-IR Purge Parker BALSTON FT-IR Purge Gas Generator model 75-52
OMNIC (Nicolet) software Thermo Nicolet Corporation For FT-IR spectra analysis
Vortex mixer Wisd Laboratory Equipment ViseMix VM
Weight Mettler Toledo NewClassic MS
Sputter coater Polaron SC7640 Sputter Coater
DOWNLOAD MATERIALS LIST

Referanslar

  1. Rajagopal, K., Schneider, J. P. Self-assembling peptides and proteins for nanotechnological applications. Curr. Opin. Struc. Biol. 14, 480-486 (2004).
  2. Ulijn, R. V., Smith, A. M. Designing peptide based nanomaterials. Chem. Soc. Rev. 37, 664-675 (2008).
  3. Bong, D. T., Clark, T. D., Granja, J. R., Ghadiri, M. R. Self-assembling organic nanotubes. Angew. Chem. Int. Ed. 40, 988-1011 (2001).
  4. Vauthey, S., Santoso, S., Gong, H. Y., Watson, N., Zhang, S. G. Molecular self-assembly of surfactant-like peptides to form nanotubes and nanovesicles. P. Natl. Acad. Sci. U.S.A. 99, 5355-5360 (2002).
  5. Matsui, H., Gologan, B. Crystalline glycylglycine bolaamphiphile tubules and their pH-sensitive structural transformation. J. Phys. Chem. B. 104, 3383-3386 (2000).
  6. Hartgerink, J. D., Beniash, E., Stupp, S. I. Self-assembly and mineralization of peptide-amphiphile nanofibers. Science. 294, 1684-1688 (2001).
  7. Reches, M., Gazit, E. Casting metal nanowires within discrete self-assembled peptide nanotubes. Science. 300, 625-627 (2003).
  8. Reches, M., Gazit, E. Molecular self-assembly of peptide nanostructures: mechanism of association and potential uses. Curr. Nanosci. 2, 105-111 (2006).
  9. Yuran, S., Razvag, Y., Reches, M. Coassembly of Aromatic Dipeptides into Biomolecular Necklaces. ACS Nano. 6, 9559-9566 (2012).
  10. Zhang, S. G. Emerging biological materials through molecular self-assembly. Biotechnol. Adv. 20, 321-339 (2002).
  11. Zhang, S. G. Fabrication of novel biomaterials through molecular self-assembly. Nat. Biotechnol. 21, 1171-1178 (2003).
  12. Hartgerink, J. D., Granja, J. R., Milligan, R. A., Ghadiri, M. R. Self-assembling peptide nanotubes. J. Am. Chem. Soc. 118, 43-50 (1996).
  13. Holmes, T. C., et al. Extensive neurite outgrowth and active synapse formation on self-assembling peptide scaffolds. P. Natl. Acad. Sci. U.S.A. 97, 6728-6733 (2000).
  14. Santoso, S., Hwang, W., Hartman, H., Zhang, S. G. Self-assembly of surfactant-like peptides with variable glycine tails to form nanotubes and nanovesicles. Nano Lett. 2, 687-691 (2002).
  15. Bellomo, E. G., Wyrsta, M. D., Pakstis, L., Pochan, D. J., Deming, T. J. Stimuli-responsive polypeptide vesicles by conformation-specific assembly. Nat. Mater. 3, 244-248 (2004).
  16. Reches, M., Gazit, E. Formation of closed-cage nanostructures by self-assembly of aromatic dipeptides. Nano Lett. 4, 581-585 (2004).
  17. Reches, M., Gazit, E. Self-assembly of peptide nanotubes and amyloid-like structures by charged-termini-capped diphenylalanine peptide analogues. Isr. J. Chem. 45, 363-371 (2005).
  18. Park, J., Kahng, B., Kamm, R. D., Hwang, W. Atomistic simulation approach to a continuum description of self-assembled beta-sheet filaments. Biophys. J. 90, 2510-2524 (2006).
  19. Yan, X., et al. Reversible transitions between peptide nanotubes and vesicle-like structures including theoretical modeling studies. ChemEur. J. 14, 5974-5980 (2008).
  20. Yan, X., et al. Transition of cationic dipeptide nanotubes into vesicles and oligonucleotide delivery. Angew. Chem. Int. Ed. 46, 2431-2434 (2007).
  21. Burkoth, T. S., et al. Structure of the beta-amyloid (10-35) fibril. J. Am. Chem. Soc. 122 (10-35), 7883-7889 (2000).
  22. Aggeli, A., et al. Hierarchical self-assembly of chiral rod-like molecules as a model for peptide beta-sheet tapes, ribbons, fibrils, and fibers. P. Natl. Acad. Sci. U.S.A. 98, 11857-11862 (2001).
  23. Hamley, I. W. Peptide fibrillization. Angew. Chem. Int. Ed. 46, 8128-8147 (2007).
  24. Maji, S. K., Haldar, D., Drew, M. G. B., Banerjee, A., Das, A. K. Self-assembly of beta-turn forming synthetic tripeptides into supramolecular beta-sheets and amyloid-like fibrils in the solid state. Tetrahedron. 60, 3251-3259 (2004).
  25. Jahn, T. R., Parker, M. J., Homans, S. W., Radford, S. E. Amyloid formation under physiological conditions proceeds via a native-like folding intermediate. Nat. Struct. Mol. Biol. 13, 195-201 (2006).
  26. Shimada, T., Sakamoto, N., Motokawa, R., Koizumi, S., Tirrell, M. Self-assembly process of peptide amphiphile worm-like micelles. J. Phys. Chem. B. 116, 240-243 (2012).
  27. Sedman, V. L., et al. Surface-templated fibril growth of peptide fragments from the shaft domain of the adenovirus fibre protein. Protein Pept. Lett. 18, 268-274 (2011).
  28. Choi, S. -. j., et al. Differential self-assembly behaviors of cyclic and linear peptides. Biomacromolecules. 13, 1991-1995 (2012).
  29. Ghosh, S., Reches, M., Gazit, E., Verma, S. Bioinspired design of nanocages by self-assembling triskelion peptide elements. Angew. Chem. Int. Ed. 46, 2002-2004 (2007).
  30. Li, L. C., et al. Self-assembling nanotubes consisting of rigid cyclic gamma-peptides. Adv. Funct. Mater. 22, 3051-3056 (2012).
  31. Krysmann, M. J., et al. Self-assembly of peptide nanotubes in an organic solvent. Langmuir. 24, 8158-8162 (2008).
  32. Segman-Magidovich, S., et al. Sheet-like assemblies of charged amphiphilic alpha/beta-peptides at the air-water interface. ChemEur. J. 17, 14857-14866 (2011).
  33. Jayawarna, V., et al. Nanostructured hydrogels for three-dimensional cell culture through self-assembly of fluorenylmethoxycarbonyl-dipeptides. Adv. Mater. 18, 611-614 (2006).
  34. Mahler, A., Reches, M., Rechter, M., Cohen, S., Gazit, E. Rigid, self-assembled hydrogel composed of a modified aromatic dipeptide. Adv. Mater. 18, 1365-1368 (2006).
  35. Ryan, D. M., Doran, T. M., Anderson, S. B., Nilsson, B. L. Effect of C-terminal modification on the self-assembly and hydrogelation of fluorinated Fmoc-Phe derivatives. Langmuir. 27, 4029-4039 (2011).
  36. Jung, J. P., Gasiorowski, J. Z., Collier, J. H. Fibrillar peptide gels in biotechnology and biomedicine. Biopolymers. 94, 49-59 (2010).
  37. Xing, B. G., et al. Hydrophobic interaction and hydrogen bonding cooperatively confer a vancomycin hydrogel: A potential candidate for biomaterials. J. Am. Chem. Soc. 124, 14846-14847 (2002).
  38. Gore, T., Dori, Y., Talmon, Y., Tirrell, M., Bianco-Peled, H. Self-assembly of model collagen peptide amphiphiles. Langmuir. 17, 5352-5360 (2001).
  39. Ashkenasy, N., Horne, W. S., Ghadiri, M. R. Design of self-assembling peptide nanotubes with delocalized electronic states. Small. 2, 99-102 (2006).
  40. Mizrahi, M., Zakrassov, A., Lerner-Yardeni, J., Ashkenasy, N. Charge transport in vertically aligned, self-assembled peptide nanotube junctions. Nanoscale. 4, 518-524 (2012).
  41. Ryu, J., Lim, S. Y., Park, C. B. Photoluminescent peptide nanotubles. Adv. Mater. 21, 1577-1581 (2009).
  42. Ryu, J., Kim, S. -. W., Kang, K., Park, C. B. Synthesis of diphenylalanine/cobalt oxide hybrid nanowires and their application to energy storage. ACS Nano. 4, 159-164 (2010).
  43. Yan, X., Zhu, P., Li, J. Self-assembly and application of diphenylalanine-based nanostructures. Chem. Soc. Rev. 39, 1877-1890 (2010).
  44. Amdursky, N., et al. Blue luminescence based on quantum confinement at peptide nanotubes. Nano Lett. 9, 3111-3115 (2009).
  45. Maity, S., Jana, P., Maity, S. K., Haldar, D. Mesoporous vesicles from supramolecular helical peptide as drug carrier. Soft Matter. 7, 10174-10181 (2011).
  46. Adler-Abramovich, L., et al. Self-assembled organic nanostructures with metallic-like stiffness. Angew. Chem. Int. Ed. 49, 9939-9942 (2010).
  47. Pelton, J. T., McLean, L. R. Spectroscopic methods for analysis of protein secondary structure. Anal. Biochem. 277, 167-176 (2000).
  48. Haris, P. I., Chapman, D. The conformational analysis of peptides using fourier-transform IR spectroscopy. Biopolymers. 37, 251-263 (1995).

Etiketler

Self-assemblyBiomolecular StructuresPeptidesHomoaromatic DipeptidesNanotubesSpheresFibrilsElectron MicroscopyAtomic Force MicroscopyFT-IRCoassemblyBeads On A String

Play Video
PDF
DOI
DOWNLOAD MATERIALS LIST
Bu Makaleden Alıntı Yapın
Yuran, S., Reches, M. Formation of Ordered Biomolecular Structures by the Self-assembly of Short Peptides. J. Vis. Exp. (81), e50946, doi:10.3791/50946 (2013).
Atıfı İndir
Tekrar Baskılar ve İzinler

View Video

✖

To prove you're not a robot, please enter the text in the image below

CAPTCHA Image
Play CAPTCHA Audio
Refresh Image