A STAGE Tip Procedure for Desalting and Purification of Peptides

Published: February 29, 2024

Abstract

This video demonstrates peptide purification through the STAGE Tip procedure. A miniature column containing resin beads bonded to long hydrocarbon chains facilitates hydrophobic interaction-based purification. Upon loading a pre-digested peptide sample into the column, the peptide fragments bind to the resin beads, allowing impurities to pass through. An elution buffer that disrupts the hydrophobic interaction is applied to elute the peptide fragments.

Protocol

1. Purification and Desalting of Peptides

  1. Pack three layers of C18 resin in a 200 μl pipette tip for each peptide sample to construct a STop And Go Extraction (STAGE)-tip.
  2. Add 1/10 stopping solution (20% acetonitrile [ACN)] and 6% trifluoroacetic acid [TFA]) to samples.
  3. Centrifuge samples for pellet precipitation at 13,200 rpm for 10 min.
  4. Transfer the supernatant to a new 2 mL tube and discard the pellet.
  5. Wash stage tips with 100 μl of 100% ACN.
  6. Centrifuge STAGE tips at 1000 x g for 2 min.
    NOTE: Centrifuge STAGE tips until all liquid has run through the C18 resin.
  7. Wash STAGE tips with 50 μl Buffer B (80% ACN, 0.5% Acetic acid, and ddH2O).
  8. Centrifuge STAGE tips at 1000 x g for 2 min.
  9. Wash STAGE tips with 200 μl Buffer A (2% ACN, 0.1% TFA, 0.5% Acetic acid, and ddH2O).
  10. Centrifuge stage tips at 1000 x g for 2 min.
  11. Load samples into STAGE tips.
  12. Centrifuge samples at 1000 x g for 3-5 min.
  13. Wash STAGE tips with 200 μl Buffer A.
  14. Centrifuge at 1000 x g for 3-5 min.
  15. Add 50 μl of Buffer B into each STAGE tip
  16. Using a syringe, elute samples containing Buffer B into a 0.2 mL PCR strip tube.
  17. Once samples are eluted, dry the peptides using a vacuum centrifuge for 45 mins.
  18. Once samples are dry, store them at room temperature until MS.
    NOTE: If peptide storage is needed for more than two weeks, we suggest storing at -20°C.
  19. Run the sample on a high-resolution mass spectrometry (MS).
    NOTE: Sample measurement parameters (e.g., amount of sample loaded, liquid chromatography gradient length, resolution) will depend on the instrumentation used.

2. Proteomic Profiling of Neutrophils 

  1. Raw data processing
    1. Upload Raw data files obtained from MS into MaxQuant.
    2. The software is designed to run with bottom-up, data-dependent acquisition files, and many default parameters are optimized for such samples. Default parameters include Digestion (Trypsin P), Variable modifications of methionine oxidation (oxidation (M)) and N-acetylation of proteins (Acetyl (Protein N-term)), and fixed modifications of carbamidomethylation of cysteine (carbamidomethyl (C)).
    3. Adjustments to these parameters include label-free quantification (LFQ; set minimum ratio count to 1), Match Between Runs (i.e., on/off), and a minimum number of peptides identified per protein (recommend setting to 2).
    4. In global parameters, import the FASTA file for sequence identification. For this experiment, the Homo sapiens (Human) (UP000005640) FASTA file from the Uniprot database was used. NOTE: Record the following information for record-keeping: Organism ID = 9606; the number of proteins = 79,740; file download date.
    5. Set the number of computer cores to be used for processing and select Start.
    6. Upon completion of MaxQuant, a 'combined' folder, along with other files, will be generated.
      NOTE: The other files may be used to identify peptides, modifications, etc., and may be needed to upload the full dataset to data repositories, including Proteome Xchange (PRIDE).
  2. Data analysis and visualization in Perseus
    1. Upload the 'proteingroups.txt' into Perseus and select all LFQ intensity files for the 'Main' window.
      NOTE: Baseline information is imported directly into the Perseus windows, but other information (e.g., modification sites) may need to be added manually.
    2. Filter rows by removing contaminants, reverse peptides, and peptides only identified by site.
    3. Transform the data by log2(x).
    4. To observe the number of proteins detected in each replicate, construct a numeric Venn diagram.
    5. Set categorial annotations for each sample.
      NOTE: For statistical purposes, all replicates of one biological sample should have the same name.
    6. Filter rows based on valid values, with the protein identified in >50% of the replicates and within at least one group.
      NOTE: Filtering by valid values can be more stringent, depending on the experiment setup and goals (e.g., protein must be present in all samples).
    7. To replace missing values for LFQ, imputation from the normal distribution can be performed.
      NOTE: the default parameters are optimized for LFQ data but can be adjusted as desired.
    8. Add annotation information to the protein rows. Add the txt.gz FASTA file (obtained from the Perseus website) in the 'bin', 'conf', and 'annotation' folders and bring in specific terms (e.g., protein names, gene names, gene ontology).
    9. The matrix is now complete and can be used for statistical testing (e.g., ANOVA, t-tests) to determine significant changes in protein abundance between the tested conditions. Other forms of visualization tools include principal component analysis plots, heat maps, and category enrichment.
      NOTE: Annotation information can also be downloaded from UniProt and integrated into the Perseus framework.

Açıklamalar

The authors have nothing to disclose.

Materials

15 ml Falcon Tube  VWR 470225-000
25 mL Serological  Fisher Scientific  14955235
Ammonium Bicarbonate (ABC) ThermoFisher Scientific A643-500
Acetic Acid Sigma Aldrich 1099510001
Acetone Sigma Aldrich 34850-1L
Acetonitrile (ACN), MS grade Pierce TS-51101
BSA assay kit  VWR CA62408-940
C18 disks (STAGE tips) Fisher Scientific  13110019
Centrifuge 5810 R Sigma Aldrich EP022628188
Dithiothreitol (DTT) ThermoFisher Scientific R0861 Prepare 1M stock of DTT aliquots and store at  -20°C
Fetal Bovine Serum (FBS) ThermoFisher Scientific  12483020 Thaw out, prepare aliquots and stored at -20°C
HEPES Sigma Aldrich H3375 Prepare 8M Urea/40m HEPES aliquots, store at -20 °C
High-resolution mass spectrometer ThermoFisher Scientific 726042
Iodoacetamide  (IAA) Fisher Scientific  AAA1471514 Prepare 0.55M stock of IAA aliquots and store at  -20°C. Avoid light exposure 
L-glutamine  Fisher Scientific  25030081 Thaw out, prepare aliquots and stored at -20°C
LoBind Microcentrifuge tubes Eppendorf 13-698-794
MaxQuant  https://www.maxquant.org/
PCR strip tubes VWR 76318-802
Penicillin Streptomycin, Amphotericin Sigma Aldrich A5955 Thaw out, prepare aliquots and stored at -20°C
Perseus  https://www.maxquant.org/Perseus/
phosphate-buffered solution (PBS)  Bioshop  PBS408 Store at room temperature 
Probe sonicator  Fisher Scientific  100-132-894
Protease inhibitor cocktail (PIC) tablet  Sigma Aldrich 5892791001 Store at 4°C
RPMI 1640 ThermoFisher Scientific  11875093 Store at 4°C
Sodium Dodecyl Sulphate (SDS) ThermoFisher Scientific  J18220.A1 prepare 2% SDS solution
SpeedVac Centrifuge  Eppendorf 07-748-15
STAGE tipping centrifuge Sonation STC-V2
T75 Flasks ThermoFisher Scientific  156499
Trifluoroacetic acid ThermoFisher Scientific 85183
Tris HCL pH 8.5 Fisher Scientific BP152-1 Store at 4°C
Trypsin/LysC Thermo Fisher Scientific  A40009 aliquot and store at -20°C
Ultrasonic bath VWR 97043-960
Urea  Bioshop  URE001.1

Etiketler

Play Video

Bu Makaleden Alıntı Yapın
A STAGE Tip Procedure for Desalting and Purification of Peptides. J. Vis. Exp. (Pending Publication), e22210, doi: (2024).

View Video