Source: Munir, H. et al., Analyzing the Effects of Stromal Cells on the Recruitment of Leukocytes from Flow. J. Vis. Exp. (2015)
The video demonstrates a method for investigating the impact of stromal cells on leukocyte recruitment. In a parallel plate flow chamber model, pro-inflammatory cytokines induce the expression of adhesion receptors by endothelial cells, facilitating neutrophil recruitment and migration. The cross-talk between stromal cells and endothelial cells diminishes neutrophil recruitment to the endothelial cells.
All procedures involving sample collection have been performed in accordance with the institute's IRB guidelines.
1. Isolation and Culture of Primary Human Endothelial Cells and Mesenchymal Stem Cells
2. Establishing Endothelial-Mesenchymal Stem Cell Co-cultures on Filters
3. Isolation of Leukocytes
4. Assembling the Flow System
5. Setting Up the Parallel Plate Flow Chamber Incorporating Filters
6. Perfusion of Leukocytes Over Endothelial Cells
7. Recording Neutrophil Capture and Behavior
8. Analysis of Leukocyte Recruitment and Behavior
Figure 1. Establishing EC-MSC co-culture and analyzing neutrophil recruitment using a flow-based adhesion assay. (A) Micrograph of (i) primary EC and (ii) passage 3 BMMSC grown on tissue culture flasks. (B) Micrograph of EC and MSC cultured on 6-well Transwell filter inserts. (C) Diagram of the perfusion system used to generate flow. (D) Schematic representation of the parallel plate filter flow chamber. (E) Micrograph of (i) firmly adherent (FA) and (ii) transmigrated (TM) neutrophils following recruitment from flow to EC stimulated with 100 U/ml TNFα.
The authors have nothing to disclose.
Collagenase Type Ia | Sigma | C2674 | Dilute in 10ml PBS to get a final concentration of 10mg/ml. Store at -20°C in 1ml aliquots. |
Dulbecco's PBS | Sigma | D8662 | With calcium and magnesium chloride. Keep sterile and store at room temperature. |
1X Medium M199 | Gibco | 31150-022 | Warm in 37 °C water bath before use. |
Gentamicin sulphate | Sigma | G1397 | Store at 4°C. Add to M199 500ml bottle. |
Human epidermal growth factor | Sigma | E9644 | Store at -20°C in 10µl aliquots. |
Fetal calf serum (FCS) | Sigma | F9665 | FCS must be batch tested to ensure the growth and viability of isolated EC. Heat inactivate at 56°C. Store in 10ml aliquots at -20°C. |
Amphotericin B | Gibco | 15290-026 | Potent and becomes toxic within a week so fresh complete HUVEC medium must be made up every week. Store at -20°C in 1ml aliquots. |
Hydrocortisone | Sigma | H0135 | Stock is in ethanol. Store at -20°C in 10µl aliquots. |
Collagenase Type II | Sigma | C6885 | Dilute stock in PBS to a final concentration of 100mg/ml. Store at -20°C in 100µl aliquots. |
Hyaluronidase | Sigma | H3631 | Dilute stock in PBS to a final concentration of 20,000U/ml. Store at -20°C in 100µl aliquots. |
100µm cell strainer for 50ml centifuge tube | Scientific Lab Supplies (SLS) | 352360 | Other commercially available cell strainers (e.g. Greiner bio-one) can also be used. |
DMEM low glucose | Biosera | LM-D1102/500 | Warm in 37 °C water bath before use. |
Penicillin/Streptomycin mix | Sigma | P4333 | Store at -20°C in 1ml aliquots. |
25cm2 tissue culture flask | SLS | 353109 | |
75cm2 tissue culture flask | SLS | 353136 | |
Bone marrow mesenchymal stem cells vial | Lonza | PT-2501 | Store in liquid nitrogen upon arrival. Cells are at passage 2 upon arrival but are designated passage 0. Exapand to passage 3 and store in liquid nitrogen for later use. |
Mesenchymal stem cell growth medium (MSCGM) | Lonza | PT-3001 | Warm in 37 °C water bath before use. For Cell Tracker Green staining use medium without FCS. |
EDTA (0.02%) solution | Sigma | E8008 | Store at 4°C. Warm in 37°C water bath before use. |
Trypsin solution | Sigma | T4424 | Store at -20°C in 2ml aliquots. Thaw at room temperature and use immediately. |
Cryovials | Greiner bio-one | 2019-02 | Keep on ice before adding before adding cell suspension. |
Mr. Frosty Freezing Container | Nalgene | 5100-0001 | Store at room temperature. When adding cryovials with cells store at -80°C for 24h before transfrring cells to liquid nitrogen. |
Cell tracker green dye | Life technologies | C2925 | Store in 5µl aliquots at -20°C. Dilute in 5ml prewarmed (at 37°C) MSCGM. |
Cell counting chambers | Nexcelom | SD-100 | Alternatively a haemocytometer can be used. |
Cellometer auto T4 cell counter | Nexcelom | Auto T4-203-0238 | |
Tumor necrosis factor α (TNFα) | R&D Systems | 210-TA-100 | Dilute stock in PBS to a final concentration of 100,000U/ml. Store at -80°C in 10µl aliquots. |
6-well, 0.4µm PET Transwell filters | SLS | 353090 | |
K2-EDTA in 10ml tubes | Sarstedt | Store at room temperature. | |
Histopaque 1119 | Sigma | 11191 | Store at 4°C. Warm to room temperature before use. |
Histopaque 1077 | Sigma | 10771 | Store at 4°C. Warm to room temperature before use. |
10ml round bottomed tube | Appleton Woods | SC211 142 AS | |
7.5% BSA Fraction V solution | Life technologies | 15260-037 | Store at 4°C. |
20ml Plastipak syringes | BD falcon | 300613 | |
5ml Plastipak syringes | BD falcon | 302187 | |
2ml Plastipak syringes | BD falcon | 300185 | |
3M hypo-allergenic surgical tape 9m x 2.5cm | Micropore | 1530-1 | Use to secure the syringe tap onto the wall of the perspex chamber. |
Silicon rubber tubing, internal diameter/external diameter (ID/OD) of 1/3mm (thin tubing) | Fisher Scientific | FB68854 | Cut silicon tubing to the appropriate size. All tubing leading directly to the electronic microvalve must be thin. |
Silicon rubber tubing ID/OD of 2/4mm (thick tubing) | Fisher Scientific | FB68855 | |
Portex Blue Line Manometer tubing | Smiths | 200/495/200 | Tubing leading to the syringe pump. |
3-way stopcock | BOC Ohmeda AB | ||
Glass 50ml syringe for pump | Popper Micromate | 550962 | Must be primed prior to use by removing any air bubbles. |
Glass coverslip | Raymond A Lamb | 26x76mm coverslips made to order. Lot number 2440980. | |
Parafilm gasket | American National Can Company | Cut a 26x76mm piece of parafilm using an aluminium template and cut a 20x4mm slot into it using a scalpel 10a. Gasket thickness is approximately 133µm. | |
Two perspex parallel plates | Wolfson Applied Technology Laboratory | Specially designed chamber consisting of parallel plates held together by 8 screws. The lower plate has a viewing slot cut out in the middle and a shallow recess milled to allow space for the coverslip, filter and gasket. The upper perspex plate has an inlet and outlet hole positioned over the flow channel. | |
Electronic 3-way microvalve with min. dead space | Lee Products Ltd. | LFYA1226032H | Electronically connected to a 12 volt DC power supply. |
Syringe pump for infusion/withdrawal (PHD2000) | Harvard Apparatus | 70-2001 | Set the diameter to 29mm and refill (flow) rate. |
L-shaped connector | Labhut | LE876 | To attach to the inlet and outlet ports onto the Ibidi microslide channel. |
Video camera | Qimaging | 01-QIC-F-M-12-C | Connected to a computer which enables digitall videos to be recorded. |
Image-Pro Plus 7.0 | Media Cybernetics | 41N70000-61592 | For data analysis. Manually tag cells displaying the different behaviors. Track cells for analysis of rolling and migration velocities. |