Back to chapter

16.1:

Gemeenschappelijke Ioneffect

JoVE Core
Chemistry
A subscription to JoVE is required to view this content.  Sign in or start your free trial.
JoVE Core Chemistry
Common Ion Effect

Languages

Share

Azijnzuur, een zwak zuur, dissocieert gedeeltelijk in oplossing om hydronium-en acetaat-ionen te produceren, terwijl het zout, natriumacetaat, volledig dissocieert om natriumionen en acetaat te produceren. Zowel azijnzuur als natriumacetaat hebben het acetaation gemeen. Wanneer natriumacetaat wordt toegevoegd aan een azijnzuuroplossing, verhoogt dit de totale concentratie van acetaationen en verstoort het het evenwicht.Om die verandering tegen te gaan, verschuift het evenwicht naar links en wordt er azijnzuur geproduceerd totdat het evenwicht is hersteld. In dit geval resulteert de aanwezigheid van het gemeenschappelijke ion in een verminderde dissociatie van een verbinding. Dit fenomeen staat bekend als het gemeenschappelijk ioneneffect.Het gemeenschappelijk ioneneffect kan worden verklaard met behulp van het principe van Le Châtelier, dat stelt dat een verandering in de concentratie van de reactanten of producten bij evenwicht ervoor zorgt dat het systeem verschuift in een richting die de verandering compenseert. De pH van een 0, 050 molaire ammoniakoplossing is 10, 97. Als er 0, 040 molair ammoniumchloride aan de oplossing wordt toegevoegd, kan de nieuwe pH worden bepaald met behulp van de baseconstante van ammoniak en een ICE-tabel.Ammoniumchloride ioniseert volledig om 0, 040 molair van zowel ammonium-als chloride-ionen te produceren. Omdat chloride-ionen pH-neutraal zijn, kunnen ze worden genegeerd. Ammoniak dissocieert gedeeltelijk om ammonium-en hydroxide-ionen te produceren.De Kb voor deze reactie is 1, 76 10⁻⁵ en is gelijk aan de concentratie van ammonium maal de concentratie hydroxide gedeeld door de concentratie van de ammoniak. De waarden voor de begin-veranderings-en evenwichtsconcentraties worden in de ICE-tabel geplaatst, met veranderingen in de concentratie aangegeven met x. Vanwege de kleine waarde van x is 0, 050 min x ongeveer gelijk aan 0, 050 en 0, 040 plus x is ongeveer gelijk aan 0, 040, wat later kan worden geverifieerd met de 5%regel.Door deze waarden in de uitdrukking voor Kb te vervangen, is x gelijk aan 2, 2 10⁻⁵ molair. De benadering is geldig aangezien de hydroxideconcentratie minder is dan 5%van 0, 040 molair. De pOH en pH van de oplossing kunnen worden berekend met behulp van de standaardvergelijkingen en zijn gelijk aan respectievelijk 4, 66 en 9, 34.Daarom veroorzaakt de aanwezigheid van het gemeenschappelijke ion, ammoniumion, een verminderde dissociatie van ammoniak en daardoor verlaagt de pH van de oplossing van 10, 97 naar 9, 34.

16.1:

Gemeenschappelijke Ioneffect

Compared with pure water, the solubility of an ionic compound is less in aqueous solutions containing a common ion (one also produced by dissolution of the ionic compound). This is an example of a phenomenon known as the common ion effect, which is a consequence of the law of mass action that may be explained using Le Châtelier’s principle. Consider the dissolution of silver iodide:

Eq1

This solubility equilibrium may be shifted left by the addition of either silver(I) or iodide ions, resulting in the precipitation of AgI and lowered concentrations of dissolved Ag+ and I. In solutions that already contain either of these ions, less AgI may be dissolved than in solutions without these ions.

This effect may also be explained in terms of mass action as represented in the solubility product expression:

Eq1

The mathematical product of silver(I) and iodide ion molarities is constant in an equilibrium mixture regardless of the source of the ions, and so an increase in one ion’s concentration must be balanced by a proportional decrease in the other.

Common Ion Effect on Solubility

The common ion affects the solubility of the compound in a solution. For example, solid Mg(OH)2 dissociate into Mg2+  and OH ions as follows;

Eq1

If MgCl2 is added to a saturated solution of Mg(OH)2, the reaction shifts to the left to relieve the stress produced by the additional Mg2+ ion, in accordance with Le Châtelier’s principle. In quantitative terms, the added Mg2+ causes the reaction quotient to be larger than the solubility product (Q > Ksp), and Mg(OH)2 forms until the reaction quotient again equals Ksp. At the new equilibrium, [OH] is less and [Mg2+] is greater than in the solution of Mg(OH)2 in pure water.

If KOH is added to a saturated solution of Mg(OH)2, the reaction shifts to the left to relieve the stress of the additional OH ion. Mg(OH)2 forms until the reaction quotient again equals Ksp. At the new equilibrium, [OH] is greater and [Mg2+] is less than in the solution of Mg(OH)2 in pure water.

 This text is adapted from Openstax, Chemistry 2e, Section 15.1: Precipitation and Dissolution.