Journal
/
Engenharia
/
Determination of the Friction Coefficients of Icy Pavements Under Different Amounts of Snowfall
JoVE Journal
Engenharia
Author Produced
É necessária uma assinatura da JoVE para visualizar este conteúdo.  Faça login ou comece sua avaliação gratuita.
JoVE Journal Engenharia
Determination of the Friction Coefficients of Icy Pavements Under Different Amounts of Snowfall

Determination of the Friction Coefficients of Icy Pavements Under Different Amounts of Snowfall

DOI:
10.3791/63769-v

•

12:21 min

•

January 06, 2023

•

, , , , ,
1Highway Academy,Chang’an University, 2School of Modern Posts (Logistics School) & Institute of Posts,Xi’an University of Posts and Telecommunications

Capítulos

  • 00:11Introduction
  • 00:57Preparation of the Equipment
  • 03:17Calculation and Analysis of Snowfall
  • 04:15Equipment Calibration
  • 06:49Friction Cofficient Determination
  • 08:40Data Analysis
  • 09:20Representative Results
  • 11:32Conclusion

Summary

Tadução automática

Tadução automática

Here, we present a method for determining the friction coefficient of pavements with different ice thicknesses indoors. The complete procedure includes the preparation of the equipment, the calculation and analysis of the snowfall, equipment calibration, friction coefficient determination, and data analysis.

Tags

Friction CoefficientIcy PavementSnowfallPendulum Friction TesterAsphalt SlabFreezing EquipmentRubber SheetPavement ThermometerSnowfall Classification

Article

Embed

ADICIONAR À PLAYLIST

Usage Statistics

Vídeos Relacionados

Preparation and Friction Force Microscopy Measurements of Immiscible, Opposing Polymer Brushes

Development of an Experimental Setup for the Measurement of the Coefficient of Restitution under Vacuum Conditions

Experimental Protocol to Investigate Particle Aerosolization of a Product Under Abrasion and Under Environmental Weathering

In Situ Visualization of the Phase Behavior of Oil Samples Under Refinery Process Conditions

A Novel Biaxial Testing Apparatus for the Determination of Forming Limit under Hot Stamping Conditions

Determination of the Excitation and Coupling Rates Between Light Emitters and Surface Plasmon Polaritons

One-Step Approach to Fabricating Polydimethylsiloxane Microfluidic Channels of Different Geometric Sections by Sequential Wet Etching Processes

Generating Lap Joints Via Friction Stir Spot Welding on DP780 Steel

Accurate Determination of the Equilibrium Surface Tension Values with Area Perturbation Tests

Determination of Aggregate Surface Morphology at the Interfacial Transition Zone (ITZ)

Read Article