Journal
/
Engenharia
/
A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars
JoVE Journal
Engenharia
This content is Free Access.
JoVE Journal Engenharia
A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars

A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars

DOI:
10.3791/57335-v

•

05:32 min

•

August 04, 2018

•

, , , , ,
1Department of Mechanical Engineering,Technical University of Denmark

Capítulos

  • 00:04Título
  • 00:42Fabrication of an Insert by Additive Manufacturing
  • 02:35Injection Molding and Quality Assessment
  • 03:50Results: The Replication of Micro Pillars using a Mold Fabricated with Additive Manufacturing
  • 05:03Conclusion

Summary

Tadução automática

Tadução automática

A protocol for fabricating injection molding inserts for complex geometry with micro features on surfaces employing Additive Manufacturing (AM) is presented.

Tags

3D ComponentMicro PillarsInjection MoldingSoft Tooling ProcessAdditive ManufacturingComputer-aided DesignPhotopolymerizationLaser Scanning Digital MicroscopeInjection Molding MachinePolyethylene GranulesMelt TemperaturePacking Pressure

Article

Embed

ADICIONAR À PLAYLIST

Usage Statistics

Vídeos Relacionados

Fabrication, Densification, and Replica Molding of 3D Carbon Nanotube Microstructures

Micro 3D Printing Using a Digital Projector and its Application in the Study of Soft Materials Mechanics

Process of Making Three-dimensional Microstructures using Vaporization of a Sacrificial Component

Micro-masonry for 3D Additive Micromanufacturing

Energy Dispersive X-ray Tomography for 3D Elemental Mapping of Individual Nanoparticles

Fabrication Process of Silicone-based Dielectric Elastomer Actuators

Adsorption Device Based on a Langatate Crystal Microbalance for High Temperature High Pressure Gas Adsorption in Zeolite H-ZSM-5

Challenges in Rheological Characterization of Highly Concentrated Suspensions — A Case Study for Screen-printing Silver Pastes

Predicting Catalyst Extrudate Breakage Based on the Modulus of Rupture

Combining Microfluidics and Microrheology to Determine Rheological Properties of Soft Matter during Repeated Phase Transitions

Read Article