Journal
/
Ingenieurwesen
/
A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars
JoVE Journal
Ingenieurwesen
This content is Free Access.
JoVE Journal Ingenieurwesen
A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars

A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars

DOI:
10.3791/57335-v

•

05:32 min

•

August 04, 2018

•

, , , , ,
1Department of Mechanical Engineering,Technical University of Denmark

Kapitel

  • 00:04Titel
  • 00:42Fabrication of an Insert by Additive Manufacturing
  • 02:35Injection Molding and Quality Assessment
  • 03:50Results: The Replication of Micro Pillars using a Mold Fabricated with Additive Manufacturing
  • 05:03Conclusion

Summary

Automatische Übersetzung

Automatische Übersetzung

A protocol for fabricating injection molding inserts for complex geometry with micro features on surfaces employing Additive Manufacturing (AM) is presented.

Tags

3D ComponentMicro PillarsInjection MoldingSoft Tooling ProcessAdditive ManufacturingComputer-aided DesignPhotopolymerizationLaser Scanning Digital MicroscopeInjection Molding MachinePolyethylene GranulesMelt TemperaturePacking Pressure

Article

Embed

ZUR WIEDERGABELISTE HINZUFÜGEN

Usage Statistics

Verwandte Videos

Fabrication, Densification, and Replica Molding of 3D Carbon Nanotube Microstructures

Micro 3D Printing Using a Digital Projector and its Application in the Study of Soft Materials Mechanics

Process of Making Three-dimensional Microstructures using Vaporization of a Sacrificial Component

Micro-masonry for 3D Additive Micromanufacturing

Energy Dispersive X-ray Tomography for 3D Elemental Mapping of Individual Nanoparticles

Fabrication Process of Silicone-based Dielectric Elastomer Actuators

Adsorption Device Based on a Langatate Crystal Microbalance for High Temperature High Pressure Gas Adsorption in Zeolite H-ZSM-5

Challenges in Rheological Characterization of Highly Concentrated Suspensions — A Case Study for Screen-printing Silver Pastes

Predicting Catalyst Extrudate Breakage Based on the Modulus of Rupture

Combining Microfluidics and Microrheology to Determine Rheological Properties of Soft Matter during Repeated Phase Transitions

Read Article