Journal
/
Bioengenharia
/
An Additive Manufacturing Technique for the Facile and Rapid Fabrication of Hydrogel-based Micromachines with Magnetically Responsive Components
JoVE Journal
Bioengenharia
This content is Free Access.
JoVE Journal Bioengenharia
An Additive Manufacturing Technique for the Facile and Rapid Fabrication of Hydrogel-based Micromachines with Magnetically Responsive Components

An Additive Manufacturing Technique for the Facile and Rapid Fabrication of Hydrogel-based Micromachines with Magnetically Responsive Components

DOI:
10.3791/56727-v

•

08:17 min

•

July 18, 2018

•

, , ,
1Molecular Engineering Laboratory, Biomedical Sciences Institute,Agency for Science Technology and Research, 2Department of Biomedical Engineering,Columbia University

Capítulos

  • 00:04Título
  • 00:36Layer-by-layer Fabrication of Hydrogels
  • 03:46Assembling and Sealing the Hydrogel-based Device
  • 05:12Actuation of the Assembled Device
  • 06:17Results: Versatile Fabrication of Hydrogel-based Micromachines
  • 07:42Conclusion

Summary

Tadução automática

Tadução automática

An additive manufacturing strategy for processing UV-crosslinkable hydrogels has been developed. This strategy allows for the layer-by-layer assembly of microfabricated hydrogel structures as well as the assembly of independent components, yielding integrated devices containing moving components that are responsive to magnetic actuation.

Tags

Additive ManufacturingHydrogel-based MicromachinesMagnetically Responsive ComponentsRapid FabricationBiocompatible DevicesPET-based HydrogelsFDA ApprovalPDMS ChamberPEGDA PrepolymerUV ExposurePhotomaskBottom Support Structures

Article

Embed

ADICIONAR À PLAYLIST

Usage Statistics

Vídeos Relacionados

Simultaneous Synthesis of Single-walled Carbon Nanotubes and Graphene in a Magnetically-enhanced Arc Plasma

Time-lapse Fluorescence Imaging of Arabidopsis Root Growth with Rapid Manipulation of The Root Environment Using The RootChip

Designing a Bio-responsive Robot from DNA Origami

Microfluidic Fabrication of Polymeric and Biohybrid Fibers with Predesigned Size and Shape

Design and Fabrication of an Elastomeric Unit for Soft Modular Robots in Minimally Invasive Surgery

Melt Electrospinning Writing of Three-dimensional Poly(ε-caprolactone) Scaffolds with Controllable Morphologies for Tissue Engineering Applications

Fabrication and Validation of an Organ-on-chip System with Integrated Electrodes to Directly Quantify Transendothelial Electrical Resistance

Optimized Setup and Protocol for Magnetic Domain Imaging with In Situ Hysteresis Measurement

A Novel Surgical Technique As a Foundation for In Vivo Partial Liver Engineering in Rat

Rapid Fabrication of Custom Microfluidic Devices for Research and Educational Applications

Read Article