The destruction of specific cells in the embryo is a powerful tool for studying cellular interactions involved in cell fate. The present protocol describes techniques for the laser ablation of targeted cells in the early embryo of the brown alga Saccharina latissima.
In Saccharina latissima, the embryo develops as a monolayered cell sheet called the lamina or the blade. Each embryo cell is easy to observe, readily distinguishable from its neighbors, and can be individually targeted. For decades, laser ablation has been used to study embryo development. Here, a protocol for cell-specific laser ablation was developed for early embryos of the brown alga S. latissima. The presented work includes: (1) the preparation of Saccharina embryos, with a description of the critical parameters, including culture conditions, (2) the laser ablation settings, and (3) the monitoring of the subsequent growth of the irradiated embryo using time-lapse microscopy. In addition, details are provided on the optimal conditions for transporting the embryos from the imaging platform back to the lab, which can profoundly affect subsequent embryo development. Algae belonging to the order Laminariales display embryogenesis patterns similar to Saccharina; this protocol can thus be easily transferred to other species in this taxon.
Laser ablation has been used for decades to study embryo development. Irradiating embryo cells with a laser beam makes it possible to monitor the regenerative potential and the modification of the cell lineage during embryogenesis and investigate the impact of targeted ablation on cell division and cell fate. The model organisms used in laser ablation methods are typically animals, such as insects1,2, nematodes3,4, vertebrates5,6, and occasionally plants7,8. In addition, a laser micro-ablation approach was used on the brown alga Fucus in 1994 and 1998 to demonstrate the role of the cell wall in the photopolarization of the early embryo9,10.
Brown algae belong to the group Stramenopiles, diverged at the root of the eukaryotic tree 1.6 billion years ago. As a result, they are phylogenetically independent of other multicellular organisms, such as animals and plants11. Saccharina latissima belongs to the order Laminariales, more commonly known as kelps, and they are among the largest organisms on earth, reaching sizes of over 30 m. Saccharina sp. is a large seaweed used for many applications such as food and feed, and its polysaccharides are extracted for use in the agricultural, pharmacological and cosmetic industries worldwide12,13. Its cultivation, mainly in Asia and more recently in Europe, requires the preparation of embryos in hatcheries before releasing juveniles in the open sea. Like all kelps, it has a biphasic life cycle composed of a microscopic gametophytic phase, during which a haploid gametophyte grows and produces gametes for fertilization, and a diploid macroscopic sporophytic phase, where a large planar blade develops from its holdfast attached to the seafloor or rocks. The sporophyte releases haploid spores at maturity, thereby completing the life cycle14,15,16.
S. latissima presents some interesting morphological features17. Its embryo develops as a monolayered planar sheet15,18,19 before acquiring a multilayered structure coinciding with the emergence of different tissue types. In addition, Laminariales is one of the only taxa of brown algae whose embryos remain attached to their maternal gametophytic tissue (Desmarestiales and Sporochnales do too15). This feature offers the opportunity to study the role of maternal tissue in this developmental process and compare maternal control mechanisms in brown algae with those in animals and plants.
This article presents the first complete protocol for laser ablation in an early kelp embryo. This protocol involving UV ns-pulsed technique results in the specific destruction of individual embryo cells to study their respective roles during embryogenesis. The procedure offers a reliable approach for investigating cell interactions and cell fate during embryogenesis in Laminariales.
1. Production of Saccharina latissima gametophytes
2. Fragmentation and induction of oogenesis
3. Image acquisition for selecting embryos for ablation and monitoring subsequent growth
4. Laser calibration
5. Laser ablation
6. Monitoring the growth of irradiated embryos
NOTE: Monitoring is carried out over several days.
Gametophytes of S. latissima were grown, and gametogenesis was induced to produce zygotes and embryos. Twelve days after the induction of gametogenesis, the embryos underwent laser ablation. Here, the experiment aimed to assess the role of specific cells in the overall development of S. latissima embryos. The most apical cell, the most basal cell, and the median cells were targeted. After tile scanning, the entire Petri dish (Figure 2A), an embryo of interest, was identified as a suitable candidate for laser shooting (Figure 2B). A specific cell of this embryo was chosen, targeted, and shot with a pulsed UV laser beam with a maximum of 40 µW of laser power (corresponding to 45% of maximum power for the equipment used here) for 1 ms (Movie 1). The cell released its contents (chloroplasts and cytoplasm). Interestingly, adjacent cells responded to the bursting of the irradiated cell by expanding into the intercellular space. The position of the irradiated embryos was recorded for subsequent monitoring over 10 days (Figure 3). Most of the irradiated embryos continued to develop but showed growth alteration (embryo shape). A detailed analysis of the morphological changes needs to be undertaken before a specific function can be attributed to each irradiated cell in controlling the overall developmental mechanism.
In contrast, embryos tested with other laser parameters (e.g., 33 ms for the shooting duration of 60%-80% laser power; Movie 2) quickly showed signs of severe stress such as cell bleaching, fading, or shape changes (rounding). Almost all embryos shot in this way died within five days after the experiment (Figure 4).
Figure 1: Photograph of the laser ablation microscope set-up. Please click here to view a larger version of this figure.
Figure 2: Annotated tile scan of a whole Petri dish. (A) Tile scan of the entire Petri dish used for laser ablation. The transmission PMT was used to obtain a brightfield scan. Once an embryo of interest has been located, the user clicks on the embryo's position in the tile scan, and the software positions the stage directly over the embryo. (B) The tile scan can then be annotated specifically to locate the embryo in the subsequent steps, to track and monitor the embryo. Here, the image shows an embryo attached to the bottom of the Petri dish, which can be easily located using the 561 nm laser. Please click here to view a larger version of this figure.
Figure 3: Time series of the growing S. latissima embryo after irradiation. This is shown in Movie 1. Laser ablation of the most apical cell of the embryo did not bleach the adjacent cells of the embryo. They continued to grow and divide, forming a normal embryo after a few days. Images were taken every 24 h, 2-9 days after ablation. The scale bar is 50 µm and is the same for all photos. D2-D9 corresponds to day-2 to day-9. Please click here to view a larger version of this figure.
Figure 4: Time series of S. latissima embryo death after laser ablation using suboptimal parameters. Overexposure to laser irradiation can easily lead to higher death rates of the target embryo and also the neighboring ones. A time series of the embryo shot in Movie 2 is shown, with the time after ablation indicated above each photo (3-6 days after ablation). Scale bar is 30 µm and applies to each photo. Please click here to view a larger version of this figure.
Movie 1: Laser ablation of the most apical cell of an 8-celled embryo of S. latissima. The focus was first adjusted on the embryo selected among a bouquet of Saccharina sporophytes (at different fields, first wide, then narrow). The most apical cell of the embryo was then shot using 45% laser power for 1 ms. The apical cell rapidly burst and released its contents. The adjacent cells, freed from the turgor of the burst cell, filled the empty space. After 5 min, the cell and its contents have stopped moving and have reached a state of equilibrium. The movie has been accelerated 4 times (from 1 image per 632 ms to 6 fps). The follow-up of embryo development is shown in Figure 3. Please click here to download this Movie.
Movie 2: Significant bleaching of cells adjacent to a burst cell caused by suboptimal laser settings. Using a laser power of 60%-80% for 1 ms or a laser power of 45% for 10 ms resulted in significant bleaching of adjacent cells and a much lower survival rate. The settings used for the laser should not cause bleaching or partial damage to adjacent cells. Best results were obtained by reducing the power and/or duration of the laser pulse, and targeting the point furthestfrom the adjacent cells. Here, the most apical cell of a 4-celled embryo of S. latissima isshot (80% laser power, 1 ms) (lateral/top view). Overbleaching of the lower and lateral cells is readily observable. The subsequent development of the embryo is shown in Figure 4. Please click here to download this Movie.
Supplementary Figure 1: Schematic flowchart of the entire protocol. Please click here to download this File.
Local cellular laser ablation allows for temporal and spatial ablation with a high level of precision. However, its efficiency can be hampered by the non-accessibility of target cells; for example, all the cells are of a three-dimensional embryo. This protocol was developed on the embryo of the alga Saccharina latissima, which develops a monolayered lamina in which all cells can be easily distinguished and destroyed individually with a laser beam.
Laser power and wavelength
NIR fs-pulsed laser is commonly used in developmental studies on animals24,25. However, in the case of brown algae such as Saccharina, the laser could not burst the cell without burning the whole embryo. This reaction may be related to the high activity of the chloroplast light harvesters.
Using the ns-pulsed UV laser for ablation, two approaches were tested: (1) using a high power pulse over a short period of time or (2) using a lower laser exposure over a longer period of time. The energy delivered by the laser, a combination of laser power and pulse duration, impacts the energy delivered to the irradiated cell. The delivered energy can also affect the surrounding cells by reflection and diffraction. Therefore, the lowest settings of the two parameters that gave reproducible results were selected to reduce any unwanted collateral effects. Laser power between 25-40 µW.cm-2 with a pulse of 1 ms appeared to be optimal. Using these parameters, the effect of the UV laser was contained at a very local level with no visible bleaching in the surrounding cells but efficient enough to cause the target cell to burst. These parameters were repeatedly applied without any direct lethal effect on the embryos. Longer pulse times or higher laser power caused bleaching of the surrounding cells or even death of the embryo, whereas lower values were insufficient to break the cell wall.
Algal material and culture conditions
Although allowing for precise shooting at the subcellular level, this technique requires the experimenter to address four critical factors to allow reliable interpretation of the results. These points must be considered both before and after the laser ablation experiment.
The first factor to address is embryo population density. Negative crowding impacts the development rate of S. latissima26. Low densities provide for (1) better pulse repeatability because the presence of other embryos in the laser path can decrease its power, and (2) easier monitoring of the embryos shot by the laser, which grow slightly slower than intact embryos; the latter quickly covering the shot embryos. The second critical factor of this protocol is the temperature at which the experiment is carried out. The laser beam itself heats the sample, but the temperature of the room and the local environment of the microscope add to the overall temperature conditions experienced by the sample, close to 18-22 °C. Here, the microscope's room was not refrigerated because this equipment is mainly used for animal cells that tolerate ambient temperatures. Fortunately, Saccharina embryos were able to withstand temperatures of 22 °C (9 °C higher than the optimal culture temperature of 13 °C) for up to 4 h. However, devices to help maintain a low ambient temperature, such as adequate ventilation or a cooling plate holder, can help mitigate the risk of adverse effects on the survival and development of the algal embryos. Furthermore, slow pre-acclimation of gametophytes to 16 °C under red light can help the embryos withstand temperature spikes during the ablation process. Third, in addition to the increase in temperature, the embryos are deprived of a suitable light source for the duration of the experiment. Moreover, the chloroplasts may be partially bleached by the 561 nm laser. Using the lowest possible power on the 561 nm laser helps reduce this effect. Fourth, transport is also a critical factor to take into account because laser ablation equipment is not available in all laboratories. Temperature spikes and external movements or shocks should be avoided to prevent the algal material's dislodgement, loss, or death. Whenever possible, the transport boxes need to be refrigerated, vibration-resistant (e.g., shock-absorbing foam), and equipped with lights. Several transport boxes that meet these requirements are available commercially.
Even if all these factors are controlled as much as possible, weak but potentially significant environmental stress may still occur. This possibility must be considered in analyzing and interpreting the embryo response to laser ablation.
In addition to the environmental conditions that must be kept stable throughout the experiment, keeping track of the irradiated organisms throughout the monitoring step is also a challenge. The growth of the different embryos changes the original landscape over time. Unless an automated microscope can be dedicated to monitoring the experiment, following the embryo after laser ablation can easily become time-consuming and generate large amounts of data. Video recordings during the initial laser ablation pulse are highly recommended to track the embryo's immediate reaction to the pulse. This rapid monitoring of the pulse impact is of significant importance because in some instances, the pulse, when targeted to the middle of the cell, caused the target cell to burst rapidly, most likely due to the difference of osmolarity between the interior of the cell and the medium (seawater). When the leakage was too fast, the neighboring cells also burst. Shooting at the most distal region of the targeted cell proved to be an efficient way of buffering the burst effect on any adjacent cells. Another efficient way to avoid violent bursts is to increase the osmolarity of the medium with sucrose27. However, the difference in osmolarity is necessary to eliminate the targeted cell's contents. Thus, maintaining sufficient osmolarity potential is required. In a few cases, chloroplasts and other compounds obstructed the opening made by the laser ablation, which resulted in cells recovering from the laser shot, with growth resuming after a few days. Additional pulses directed at unclogging the opening proved sufficient to prevent obstruction.
Limitations
A trade-off must be struck between laser power, which should be high enough to make the cells empty their contents, and the survival of the neighboring cells, which in algal embryos are particularly sensitive to heat stress and photobleaching. Therefore, close monitoring of the cells after the laser shot is the key to controlling this step and ensuring that the target cells are dead. Otherwise, the interpretation of the targeted cells on the fate of the neighboring cells, and thus the subsequent development of the embryo, can be misleading.
Puncturing cells with a needle may seem to be an alternative in which the algal cells would not experience any heat or light stress. However, this approach would be challenging because brown algal embryo cells grow immersed in seawater and have no contact with any solid surface. The thick and elastic cell wall resists needle penetration even when maintaining the embryo in contact with a solid, glass surface using a micromanipulator in a standard microinjection system.
In summary, this protocol describes the complete experimental procedure and settings for the laser ablation and monitoring of brown algal embryos and the critical steps for a successful experiment (Supplementary Figure 1). This unique approach is a promising method for studying cell interactions and cell fate in the early embryos of brown algae.
The authors have nothing to disclose.
S.B.'s PhD grant is funded by Region Bretagne (ARED grant Number COH20020) and Sorbonne Université. I.T.is PhD grant is funded by Region Bretagne (ARED grant Number COH18020) and the Norvegian NMBU University. This project has received financial support from the CNRS through the MITI interdisciplinary programs. MRic is member of the national infrastructure France-BioImaging supported by the French National Research Agency (ANR-10-INBS-04).
25 mm glass bottom petri dish | NEST | 801001 | |
Autoclaved sea water | – | Collected offshore near the Astan buoy (48°44.934 N 003°57.702 W) close to Roscoff, France, at a depth of 20 m. | |
Cell scraper | MED 2 | 83.3951 | |
Cell strainer 40 µm | Corning / Falcon | 352340 | |
Culture cabinets | Snijders Scientific Plant Growth Cabinet ECD01 | Any other brand is suitable provided that the light intensity, the photoperiod and the temperature can be controlled. | |
LSM 880 Zeiss confocal microscope | Carl Zeiss microscopy, Jena, Germany | Ablation and imaging were performed using a 40x/1.2 water objective | |
Pellet pestles | Sigma Aldrich | Z359947 | Blue polypropylene (autoclavable) |
Provasoli supplement | – | Recipe is available here: http://www.sb-roscoff.fr/sites/www.sb-roscoff.fr/files/documents/station-biologique-roscoff-preparation-du-provasoli-2040.pdf | |
Pulsed 355 laser (UGA-42 Caliburn 355/25) | Rapp OptoElectronic, Wedel, Germany | ||
Scalpel | Paramount | PDSS 11 | |
SysCon software | Rapp OptoElectronic, Wedel, Germany | Laser-driver software | |
ZEN software | Carl Zeiss microscopy, Jena, Germany | Imaging software, used together with the SysCon software; Black 2.3 version |