ジャーナル
/
工学
/
Evaluating the Effect of Roadside Parking on a Dual-Direction Urban Street
JoVE Journal
工学
Author Produced
このコンテンツを視聴するには、JoVE 購読が必要です。  サインイン又は無料トライアルを申し込む。
JoVE Journal 工学
Evaluating the Effect of Roadside Parking on a Dual-Direction Urban Street

Evaluating the Effect of Roadside Parking on a Dual-Direction Urban Street

DOI:
10.3791/63384-v

•

14:55 min

•

January 20, 2023

•

, , , , ,
1Highway Academy,Chang’an University, 2School of Modern Posts (Logistics School) & Institute of Posts,Xi’an University of Posts and Telecommunications

章

  • 00:10Introduction
  • 00:41Prepare the Equipment
  • 01:42Data Collection
  • 05:47Data Analysis
  • 06:18Build the Simulation Model
  • 12:35Simulation Model Calibration
  • 13:11Sensitivity Analysis
  • 13:47Representative Results
  • 14:15Conclusion

概要

自動翻訳

自動翻訳

In this study, the effect of roadside parking on an urban street is analyzed. The entire process consists of traffic data gathering, data processing, operation simulation, simulation calibration, and sensitivity analysis.

タグ

Traffic DataRoadside ParkingUrban StreetRadarRoadside Laser DeviceSimulation ModelTraffic OperationData CollectionTwo-directionTwo-lane RoadReflective TripodRadar TripodRadar SoftwareRoadside Laser Device

Article

Embed

プレイリスト追加

Usage Statistics

関連ビデオ

Evaluating Plasmonic Transport in Current-carrying Silver Nanowires

Time Multiplexing Super Resolving Technique for Imaging from a Moving Platform

Casting Protocols for the Production of Open Cell Aluminum Foams by the Replication Technique and the Effect on Porosity

Experiments on Ultrasonic Lubrication Using a Piezoelectrically-assisted Tribometer and Optical Profilometer

Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores

Effect of Bending on the Electrical Characteristics of Flexible Organic Single Crystal-based Field-effect Transistors

Experimental Implementation of a New Composite Fabrication Method: Exposing Bare Fibers on the Composite Surface by the Soft Layer Method

The Modular Design and Production of an Intelligent Robot Based on a Closed-Loop Control Strategy

Predicting Catalyst Extrudate Breakage Based on the Modulus of Rupture

In Situ Transmission Electron Microscopy with Biasing and Fabrication of Asymmetric Crossbars Based on Mixed-Phased a-VOx

Read Article