ジャーナル
/
工学
/
Procedure for the Transfer of Polymer Films Onto Porous Substrates with Minimized Defects
JoVE Journal
工学
Author Produced
このコンテンツを視聴するには、JoVE 購読が必要です。  サインイン又は無料トライアルを申し込む。
JoVE Journal 工学
Procedure for the Transfer of Polymer Films Onto Porous Substrates with Minimized Defects

Procedure for the Transfer of Polymer Films Onto Porous Substrates with Minimized Defects

6,404 Views

•

05:02 min

•

June 22, 2019

DOI:

10.3791/59554-v

DOI:
10.3791/59554-v

•

05:02 min
June 22, 2019

•

3 Views
, , , , , ,
1分子工学研究所,University of Chicago, 2Chemical Sciences and Engineering Division,Argonne National Laboratory, 3分子工学研究所,Argonne National Laboratory, 4Advanced Materials for Energy-Water Systems (AMEWS) Energy Frontier Research Center,Argonne National Laboratory

概要

Automatically generated

We present a procedure for highly controlled and wrinkle-free transfer of block copolymer thin films onto porous support substrates using a 3D-printed drain chamber. The drain chamber design is of general relevance to all procedures involving transfer of macromolecular films onto porous substrates, which is normally done by hand in an irreproducible fashion.

Explore More Videos

Polymer FilmsPorous SubstratesThin Film Transfer3D Printed Drain ChamberSpin-coated Polymer StackPolyacrylic AcidBlock CopolymerAnodized Aluminum Oxide MembraneFiltration DeviceLaboratory JackSample Transfer ToolSyringe PumpDeionized WaterPolymer Film Delamination

Read Article

Cite this Article

Guio, L., Liu, C., Boures, D., Getty, P. T., Waldman, R., Liu, X., Darling, S. B. Procedure for the Transfer of Polymer Films Onto Porous Substrates with Minimized Defects. J. Vis. Exp. (148), e59554, doi:10.3791/59554 (2019).

Download .ris file

Copy

Share Video

.

Copy