ジャーナル
/
工学
/
Micro 3D Printing Using a Digital Projector and its Application in the Study of Soft Materials Mechanics
JoVE Journal
工学
This content is Free Access.
JoVE Journal 工学
Micro 3D Printing Using a Digital Projector and its Application in the Study of Soft Materials Mechanics

Micro 3D Printing Using a Digital Projector and its Application in the Study of Soft Materials Mechanics

DOI:
10.3791/4457-v

•

09:24 min

•

November 27, 2012

•

,
1機械工学科,Massachusetts Institute of Technology

章

  • 00:05標題
  • 01:43Setting-up a Desktop 3D Printer Using a Digital Data Projector
  • 02:56Design and Fabrication of Gel Tubes
  • 05:30Swelling Experiment for Prescribed Pattern Formation by Elastic Instability
  • 06:36Results: Micro 3D Printing Using a Digital Projector
  • 08:52Conclusion

概要

自動翻訳

自動翻訳

We demonstrate controlled pattern transformation of swelling gel tubes by elastic instability. A simple projection micro stereo-lithography setup is built using an off-the-shelf digital data projector to fabricate three-dimensional polymeric structures in a layer-by-layer fashion. Swelling hydrogel tubes under mechanical constraint display various circumferential buckling modes depending on dimension.

タグ

Micro 3D PrintingDigital ProjectorSoft Materials MechanicsBucklingPattern TransformationMechanical InstabilityElastomersHydrogelsSwelling GelsProjection Micro-stereolithographyPμSL SystemDigital Data ProjectorControlled Pattern TransformationDesktop 3D Printer

Article

Embed

プレイリスト追加

Usage Statistics

関連ビデオ

Controlling the Size, Shape and Stability of Supramolecular Polymers in Water

Synthesis and Functionalization of 3D Nano-graphene Materials: Graphene Aerogels and Graphene Macro Assemblies

Quantification of Hydrogen Concentrations in Surface and Interface Layers and Bulk Materials through Depth Profiling with Nuclear Reaction Analysis

Wicking Tests for Unidirectional Fabrics: Measurements of Capillary Parameters to Evaluate Capillary Pressure in Liquid Composite Molding Processes

Challenges in Rheological Characterization of Highly Concentrated Suspensions — A Case Study for Screen-printing Silver Pastes

A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars

Studying Large Amplitude Oscillatory Shear Response of Soft Materials

Multimodal 3D Printing of Phantoms to Simulate Biological Tissue

In Situ Transmission Electron Microscopy with Biasing and Fabrication of Asymmetric Crossbars Based on Mixed-Phased a-VOx

3D Printing – Evaluating Particle Emissions of a 3D Printing Pen

Read Article