Optimizing the Genetic Incorporation of Chemical Probes into GPCRs for Photo-crosslinking Mapping and Bioorthogonal Chemistry in Live Mammalian Cells

Robert Serfling; Lisa Seidel; Thore B&#246;ttke; Irene Coin

doi:10.3791/57069

JoVE Journal > Chemistry

化学

Optimizing the Genetic Incorporation of Chemical Probes into GPCRs for Photo-crosslinking Mapping and Bioorthogonal Chemistry in Live Mammalian Cells

Published: April 09, 2018

doi:

10.3791/57069

Robert Serfling*¹, Lisa Seidel*¹, Thore Böttke*¹, Irene Coin¹

¹Institute of Biochemistry, Faculty of Life Sciences,University of Leipzig

概要

A facile fluorescence assay is presented to evaluate the efficiency of amino-acyl-tRNA-synthetase/tRNA pairs incorporating non-canonical amino-acids (ncAAs) into proteins expressed in mammalian cells. The application of ncAAs to study G-protein coupled receptors (GPCRs) is described, including photo-crosslinking mapping of binding sites and bioorthogonal GPCR labeling on live cells.

Abstract

The genetic incorporation of non-canonical amino acids (ncAAs) via amber stop codon suppression is a powerful technique to install artificial probes and reactive moieties onto proteins directly in the live cell. Each ncAA is incorporated by a dedicated orthogonal suppressor-tRNA/amino-acyl-tRNA-synthetase (AARS) pair that is imported into the host organism. The incorporation efficiency of different ncAAs can greatly differ, and be unsatisfactory in some cases. Orthogonal pairs can be improved by manipulating either the AARS or the tRNA. However, directed evolution of tRNA or AARS using large libraries and dead/alive selection methods are not feasible in mammalian cells. Here, a facile and robust fluorescence-based assay to evaluate the efficiency of orthogonal pairs in mammalian cells is presented. The assay allows screening tens to hundreds of AARS/tRNA variants with a moderate effort and within a reasonable time. Use of this assay to generate new tRNAs that significantly improve the efficiency of the pyrrolysine orthogonal system is described, along with the application of ncAAs to the study of G-protein coupled receptors (GPCRs), which are challenging objects for ncAA mutagenesis. First, by systematically incorporating a photo-crosslinking ncAA throughout the extracellular surface of a receptor, binding sites of different ligands on the intact receptor are mapped directly in the live cell. Second, by incorporating last-generation ncAAs into a GPCR, ultrafast catalyst-free receptor labeling with a fluorescent dye is demonstrated, which exploits bioorthogonal strain-promoted inverse Diels Alder cycloaddition (SPIEDAC) on the live cell. As ncAAs can be generally applied to any protein independently on its size, the method is of general interest for a number of applications. In addition, ncAA incorporation does not require any special equipment and is easily performed in standard biochemistry labs.

Introduction

The genetic incorporation of chemical probes into proteins is a powerful method to facilitate investigation of structural and dynamic aspects of protein function directly in the native context of the live cell. Nowadays, hundreds of non-canonical amino acids (ncAAs) equipped with the most disparate chemical groups can be site-specifically incorporated into proteins by biosynthesis¹^,²^,³^,⁴. Between them, one finds photo-sensitive ncAAs such as photo-crosslinkers⁵, photo-caged⁶^,⁷^,⁸^,⁹ and photo-switchable amino acids¹⁰^,¹¹, amino acids bearing strained alkenes and alkynes for catalyst-free bioorthogonal chemistry²^,¹²^,¹³^,¹⁴^,¹⁵^,¹⁶^,¹⁷, amino acids carrying dansyl¹⁸, coumarin⁹^,¹⁹, and prodan²⁰^,²¹ fluorophores, and amino acids equipped with other biophysical probes as well as with post translational modifications¹^,²^,³^,⁴^,²²^,²³^,²⁴^,²⁵.

The genetic encoding of a ncAA is enabled by a dedicated amino-acyl-tRNA-synthetase (AARS) paired to a cognate suppressor-tRNA, which incorporates the ncAA in response to an amber stop codon during the regular ribosomal synthesis. ncAARS/tRNA pairs are engineered so as to be orthogonal in the host organism, i.e. not cross-talk with the endogenous pairs. The technique is well established both in prokaryotic and eukaryotic hosts and easily applicable to mammalian cells. Pairs for ncAA incorporation in mammalian cells are based on three main orthogonal systems: the tyrosyl system, that combines the TyrRS from E. coli²⁶ with a tyrosyl amber suppressor from B. stearothermophilus²⁷ (EcTyrRS/BstYam pair), the E. coli leucyl system (EcLeuRS/tRNA^Leu_CUA pair)⁶^,¹⁸^,²⁸ and the archaeal pyrrolysyl system (PylRS/tRNA^Pyl pair)³, whereby the tRNA^Pyl is a natural amber suppressor. In general, each ncAA is recognized by a specialized ncAARS. Depending on the structure of the ncAA, the ncAARS is obtained via directed evolution of either TyrRS, LeuRS or PylRS, although some synthetases can accept more than one ncAA.

The orthogonal pair is imported into the cells by simply using a plasmid vector. Most common and efficient plasmids are bicistronic and encode both for the synthetase and the tRNA forming the orthogonal pair²⁹. A second plasmid encoding for the protein of interest bearing an amber codon at the site designated for modification is co-transfected. The ncAA is simply added to the cell growth medium. However, different specialized groups often use different variants of plasmid constructs even for the incorporation of the same ncAA. Constructs differ in the arrangement of the genes in the vector, type of the synthetase, codon usage in the synthetase gene, promoter usage, variant of the tRNA and number of tRNA expression cassettes. Moreover, the incorporation efficiency of different ncAAs can vary drastically due to the different catalytic efficiency of the different synthetases, the quality of the tRNA, and other factors³⁰. Therefore, it is important to have at hand a fast and reliable method to evaluate the efficiency of an orthogonal pair, both to choose the most suitable system for a desired application and to perform some optimization steps that improve overall protein expression yields.

We have established a simple and robust fluorescence-based assay to evaluate the efficiency of orthogonal pairs²⁹ (Figure 1). In the assay, cells are co-transfected with the plasmid encoding for the orthogonal pair, together with a bicistronic reporter plasmid encoding both for the green fluorescent protein bearing an amber stop codon at a permissive position (EGFP^TAG) and the mCherry gene. Red and green fluorescence of whole-cell lysates are read in separate channels on a plate reader in a 96-well plate. The intensity of the green fluorescence directly correlates with the efficiency of amber suppression, whereas the intensity of red fluorescence gives a direct estimate of the size of the measured sample and the transfection efficiency. With respect to similar assays based on fluorescence assisted cell sorting (FACS) read out³¹^,³², the assay gives an immediate and comprehensive assessment of protein expression in the whole cell population, which is more representative of usual experimental conditions, and offers an easier data acquisition and processing with standard software. Overall, the main advantage of the assay is that a medium to a large number of samples can be analyzed in parallel. Using this assay, we have screened a rationally designed library of suppressor-tRNAs to improve the efficiency of the Pyl orthogonal system³⁰. This work describes the experimental protocol to perform this assay and show examples of its application, including the optimization of the orthogonal pair for the incorporation of the photo-crosslinking ncAA p-azido-L-phenylalanine (Azi) and the comparison of incorporation efficiencies of different amino acids (Figure 2).

Over the last years, ncAA tools have been proven very powerful to investigate structural and functional aspects of G-protein coupled receptors (GPCRs)³³^,³⁴^,³⁵^,³⁶^,³⁷^,³⁸. In humans, GPCRs form a large family of membrane receptors (800 members) and represent main targets for therapeutic drugs. Direct structural characterization of GPCRs is still challenging and complementary biochemical methods are highly needed for their investigation. We have pioneered the use of photo-crosslinking ncAAs to map GPCR surfaces and discover ligand binding pockets³⁴. Using our optimized system for Azi incorporation, we systematically incorporated Azi throughout the whole juxtamembrane domain of a GPCR directly in live mammalian cells. Upon UV irradiation, Azi forms a highly reactive nitrene species that covalently captures neighboring molecules. When the ligand is added to the system, Azi serves as a proximity probe to reveal which positions of the receptor come close to the bound ligand. In this way, the binding mode of the neuropeptide hormone Urocortin I (Ucn1) on the class B GPCR corticotropin-releasing-factor receptor type 1 (CRF1R)³³ was first unveiled. Lately, we have disclosed distinct binding patterns of agonists and antagonists on the same receptor³⁸. A similar approach has been applied by others to reveal orthosteric and allosteric binding sites of other peptides and small molecule ligands on other GPCRs³⁹^,⁴⁰^,⁴¹^,⁴². This manuscript describes the experimental protocol applied in our lab for photo-crosslinking mapping of GPCR surfaces. The method is relatively fast, straightforward and does not require any special equipment, so that it is applicable in standard biochemistry labs. Importantly, the approach provides a valuable tool not only to identify ligand binding sites where 3D structural data are scarce, but also to supplement existing in vitro data with information from fully post-translationally modified receptors in the physiological environment of the live cell.

The recent development of novel ncAAs bearing on the side chain chemical groups suitable for ultrafast catalyst-free bioorthogonal chemistry has opened up the possibility to install last-generation fluorophores for super-resolution imaging into proteins directly on the live cells²^,⁴³. Such chemical anchors include strained cyclooctyne in SCOK¹⁴, bicyclo[6.1.0]nonyne in BCNK¹²^,¹⁷, and trans-cyclooctenes in TCO*K¹³^,¹⁵^,¹⁷ among other ncAAs harboring a norbornene¹⁶^,¹⁷^,⁴⁴ or cyclopropene⁴⁵^,⁴⁶ moiety. Bulky ncAAs for bioorthogonal chemistry are incorporated by a variant of the PylRS usually denoted as PylRS^AF (indicating mutation Y271A and Y349F in M. barkeri PylRS), as well as by other ad hoc evolved ncAARSs¹⁷^,⁴⁴. The bioorthogonal anchors react with tetrazine reagents⁴⁷ via inverse electron-demand Diels-Alder cycloaddition to give high labeling yields within a few minutes⁴³^,⁴⁸. However, application of this powerful approach to label GPCRs has been challenging due to a low overall efficiency of the orthogonal ncAA incorporation system. Using our enhanced Pyl system, we have recently demonstrated high-yield incorporation of such amino acids into GPCRs and ultrafast GPCR labeling on the surface of live mammalian cells³⁰. Labeled receptors were still functional, as they physiologically internalized upon activating the receptor with an agonist. The experimental protocol for the incorporation of bioorthogonal anchors into GPCRs and the following labeling steps are described here. Equipping GPCRs with small bright fluorophores is the first fundamental step toward the study of GPCR structural dynamics in the live cell via advanced microscopy techniques.

Protocol

1. Fluorescence-based Screening of Incorporation Efficiencies (Figure 1)

Maintain HEK293 cells in Dulbecco's Modified Eagle's Medium (DMEM; high glucose, 4 mM glutamine, pyruvate) supplemented with 10 % (v/v) fetal bovine serum (FBS), 100 U/mL penicillin and 100 µg/mL streptomycin at 37 °C, 95 % humidity and 5 % CO₂.
Seed the cells the day before transfection.
1. Detach the cells for 5 min at 37 °C in 0.05 % Trypsin/PBS supplemented with 0.5 mM EDTA. Use 1 mL Trypsin/EDTA for a 10-cm dish. Quench with 10 volumes of complete medium and resuspend the cells by pipetting. Count the number of cells in the suspension using a hemocytometer⁴⁹.
2. Seed 6.0 x 10⁵ HEK293 cells per well of 6-well plates in 2 mL complete growth medium. Prepare as many wells as the number of samples, and two additional wells for the wild-type EGFP and a mock-transfected sample, respectively.
Control confluence (area occupied by the cells) under a microscope. Transfect cells at ~70 % confluence using polyethyleneimine (PEI) reagent.
1. 1h prior to transfection, add the appropriate amount of freshly prepared ncAA stock solution to all wells for a final ncAA concentration of 0.25-0.5 mM. Add the ncAA to all wells, including the wild-type positive control and mock-transfected cells, to prevent differences in fluorescence signals that may be caused by effects of the ncAA on cellular growth.
  Note: To prepare stock solutions, dissolve the ncAA to 0.1-0.5 M using 0.2-0.5 M NaOH. However, some ncAAs may require initial solubilization in DMSO and/or neutralization by four volumes of 1 M HEPES (pH 7.4) before use. Commonly, the manufacturer recommends a protocol to prepare a stock solution.
2. In a microcentrifuge tube, mix 1 µg of plasmid DNA encoding for the ncAARS/tRNA pair to be tested with 1 µg of reporter plasmid DNA (pcDNA3.0-EGFP_183TAG-mCherry). In separate tubes, prepare an identical transfection using the EGFP wild-type reference and a mock transfection.
  Note: Number of copies of the tRNA cassette embedded in the plasmid encoding for the ncAARS/tRNA pair depends on the application. To facilitate cloning, 1 tRNA copy is recommended when screening different tRNAs, whereas 4 copies are recommended (albeit not strictly necessary) when either testing different ncAARS or the incorporation of different ncAAs by the same orthogonal pair.
3. To each tube containing the DNA add 100 µL lactate buffered saline (LBS) containing 20 mM sodium lactate at pH 4.0 and 150 mM NaCl. Mix briefly.
4. To each tube containing the DNA in LBS add 6 µL of 1 µg/µL PEI in LBS (ratio PEI/DNA = 3/1 w/w) and vortex immediately. Incubate at RT for 10-15 min.
5. Take 400 µL cell medium from each well and add it to the DNA-PEI mixture to neutralize the pH. Dribble the DNA mixture onto the cells.
  Note: DMEM usually contains phenol red as pH indicator. During the neutralization step the color of the mixture added in the tube will change from yellow (acidic) to red (neutral). Although forming the DNA complexes in LBS at acidic pH gives the highest transfection yields⁵⁰, DNA-PEI complexes can alternatively be formed directly at pH 7.4 (for instance in serum-free DMEM). If using DMEM to form DNA complexes, skip the neutralization step 1.3.5. In any case, it is essential that no serum is present in the mixture when forming the complexes.
Harvest cells 48 h post-transfection.
1. Aspirate the medium and rinse the cells once with 2 mL pre-warmed PBS (37 °C). Add 800 µL of PBS supplemented with 0.5 mM EDTA and incubate for 20 min at 37 °C. Detach and suspend the cells by pipetting up and down.
2. Transfer the cell suspension into 1.5 mL tubes containing 200 µL PBS supplemented with 5 mM MgCl₂.
3. Centrifuge for 2 min at 800 x g and discard the supernatant.
  Note: The protocol can be paused here. In this case, flash-freeze the pellets in liquid N₂ and store at -80 °C for up to one month. Always wear eye protection goggles.
Add 100 µL Tris lysis buffer (50 mM Tris-HCl pH 8.0, 150 mM NaCl, 1% Triton X-100, 1 mM EDTA and freshly added PMSF) to the cell pellets and incubate on ice for 30 min. To facilitate lysis, vortex every 5 min.
Spin down the cell debris for 10 min at 4 °C and 14,000 x g and transfer 90 µL of the supernatant into black 96-well plates. Measure EGFP and mCherry fluorescence using a plate reader equipped with a fluorescence module.
Note: Use appropriate excitation and emission filters for EGFP (λ_abs: 488 nm; λ_em: 509 nm) and mCherry (λ_abs: 588 nm; λ_em: 611 nm). Measured EGFP values will span a range between the minimum value obtained from mock-transfected cells and a maximum value, which is usually obtained from wild-type EGFP. Take care of setting up the correct measurement window in the instrument.
The efficiency of ncAA incorporation is calculated as the ratio between the fluorescence of the sample and the fluorescence obtained from expression of wild-type EGFP. All values are normalized to mCherry fluorescence.

2. Genetic Incorporation of ncAAs into GPCRs for Photo-crosslinking Mapping of Ligand-GPCR Interactions (Figure 3)

Maintain HEK293T cells in DMEM supplemented with 10 % (v/v) FBS, 100 U/mL penicillin and 100 µg/mL streptomycin at 37 °C, 95 % humidity and 5 % CO₂.
Seed cells the day before transfection.
1. Detach the cells for 5 min at 37 °C in 0.05 % Trypsin/PBS supplemented with 0.5 mM EDTA. Use 1 mL Trypsin/EDTA for a 10-cm dish. Quench with 10 volumes of complete medium and resuspend the cells by pipetting up and down. Count the number of cells in the suspension using a hemocytometer⁴⁹.
2. Seed 5.0 x 10⁵ 293T cells per well in 2 mL complete growth medium in 6-well plates. For each position to be screened, prepare 1 well per ligand plus one well for the binding control³³^,³⁸. An extra well to be transfected with the wild-type (wt) receptor may be included to check the expression level of the mutant.
The day after, control confluence (area occupied by the cells) under a microscope. Transfect cells at ~70% confluence using PEI.
1. 1h prior to transfection, add Azi to all wells to a final concentration of 0.5 mM.
  1. Prepare a 0.5 M stock solution of Azi. Per 6-well plate, weigh 1.2 mg Azi into a tube and dissolve it in 15 µL 0.5 M NaOH. Dilute the stock solution in 1.2 mL complete medium and add 200 µL of the mixture to each well.
    Note: Prepare a fresh stock solution of Azi for every experiment. The azide moiety has a short half-life in aqueous solutions, especially at basic pH, and the AziRS incorporates the intact but also the degraded form.
2. Transfect a total amount of 2 µg DNA per well: 1 µg of plasmid encoding for the FLAG-tagged GPCR bearing a TAG codon at the desired position and 1 µg of the plasmid encoding for the orthogonal pair dedicated to Azi (E2AziRS⁵¹ and 4 copies of the cognate suppressor-tRNA BstYam)³³^,³⁸.
  Note: When including a wt comparison to check expression levels, transfect a lower amount of plasmid DNA for the wt receptor. Depending on the GPCR, 0.2-0.5 µg of plasmid encoding the wt receptor yield similar levels as 1.0 µg of the mutant plasmid. Transfect the same amount of DNA in all wells, filling up the missing DNA with a mock (for instance an empty vector).
3. Proceed as described in 1.3.3-1.3.5.
4. 48 h post-transfection, proceed either with step 2.4 for photo-crosslinking of the ligands or go to step 2.5 for direct harvesting and analysis for verifying receptor expression.
Photo-crosslinking of the ligand.
1. Prepare a 1,000x ligand stock solution. Dissolve the peptide ligand at a concentration of 100 µM in DMSO.
  Note: The ligand concentration depends on the dissociation constant K_D of the ligand-GPCR interaction. A final concentration of 100 x K_D is recommendable. If the peptide ligand is a salt of trifluoroacetic acid (TFA), consider the weight of TFA when calculating the molecular weight (1 x TFA per basic amino acid in the peptide). Also, consider that peptides are in general hygroscopic. Avoid repeated freezing of peptide powder and never open a peptide container until it has not reached room temperature.
2. Dilute the ligand stock solution 1:1,000 in binding buffer consisting of 0.1% BSA, 0.01% Triton-X 100, 5 mM MgCl₂ in HEPES dissociation buffer (HDB) containing 12.5 mM 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES)-HCl pH 7.4, 140 mM NaCl and 5 mM KCl. Prepare 1 mL per Azi-GPCR mutant. Replace the cell medium with 1 mL of the ligand solution. Incubate for 10 min at RT.
  Note: Adjust the incubation time to the specific GPCR, accounting for ligand kinetics and receptor internalization. Prolonging the incubation time does not improve crosslinking yields.
3. Irradiate the samples for 20 min in a UV crosslinker at 365 nm with 5 x 8 W tubes and ~ 5 cm distance to the cells. Detach the cells by pipetting and transfer them into a 1.5 mL reaction tube. Pellet the cells for 3 min at 800 x g and discard the supernatant.
4. Dissolve a tablet of protease inhibitor (PI) cocktail in 1 mL 25 mM EDTA/H₂O to make a 50x stock solution. Aliquot the PI stock solution and store it at -20 °C. Dilute the 50x stock 1:25 in HDB and resuspend the cell pellets in 50 µL of 2 x PI in HDB. Flash-freeze the cells in liquid N₂.
  Note: Wear eye protection goggles. At this point, the samples can be stored at -80 °C for up to one month. Proceed with step 2.6.
Direct cell harvest.
1. Aspirate the medium. Add 800 µL of 0.5 mM EDTA in HDB. Incubate for 10 min at RT or on ice.
2. Detach the cells by pipetting up and down and transfer them into a 1.5 mL reaction tube. Add 200 µL of 5 mM MgCl₂ in HDB. Pellet the cells for 3 min at 800 x g and discard the supernatant.
3. Resuspend the cell pellets in 50 µL of 2 x PI in HDB and flash freeze in liquid N₂. Wear eye protection goggles.
  Note: At this point, the samples can be stored at -80 °C for up to 1 month.
Cell lysis.
1. Thaw the cells in a water bath at 37 °C for 30-45 s and vortex briefly. Keep samples cold from now on. Pellet membranes at 2,500 x g and 4 °C for 10 min. Discard the supernatant, which contains the bulk of cytosolic proteins.
2. Resuspend the pellets in 50 µL HEPES lysis buffer containing 50 mM HEPES-HCl pH 7.5, 150 mM NaCl, 10 % glycerol, 1 % Triton X-100, 1.5 mM MgCl₂, 1 mM EGTA, 1 mM DTT and freshly added 2 x PI cocktail. Mix thoroughly. Lyse the cells 30 min on ice and vortex every 5 min.
3. Spin down the cell debris for 10 min at 14,000 x g and 4 °C. Immediately transfer the supernatant to a fresh reaction tube.
  Note: Proceed with the analysis right away. The lysates can be stored at -20 °C, however, every freeze-thaw cycle impairs the quality of the results.
Western blot analysis.
1. To prepare the sample, take 3-5 µL lysate and fill it up to 7 µL with H₂O. Add 2 µL 1 M DTT and 3 µL 4 x sample buffer containing 63 mM Tris-HCl pH 6.8, 2 % SDS, 10 % glycerol and 0.04 % bromphenol blue. Incubate for 30 min at 37 °C.
2. When the GPCR is glycosylated and faint or smeared bands are a problem, deglycosylate samples with PNGase F to increase signal intensity and sharpen the bands. Use 3-5 µL lysate and deglycosylate in a total volume of 10 µL following the supplier's protocol. Add 3 µL 4 x sample buffer.
  Note: Membrane proteins are often glycosylated in multiple sites and states, which impairs the quality of resolution in SDS-PAGE analysis. However, do not deglycosylate the samples for analysis of the expression level of the Azi-GPCR mutants using anti-FLAG antibodies because it is relevant to evaluate the portion of the fully glycosylated, mature receptor at the cell surface.
3. Resolve samples via standard SDS-PAGE and blot transfer proteins to a PVDF membrane.
  CAUTION: Acrylamide is neurotoxic. Wear gloves and eye protection.
4. Block the membrane for 1 h at RT or overnight at 4 °C in 5 % skim milk in TBS-T containing 20 mM Tris-HCl pH 7.4, 0.15 M NaCl and 0.1 % Tween 20.
5. Probe the membrane with an anti-ligand antibody followed by the HRP-conjugated secondary antibody. Wash in between with TBS-T. To detect the expression level of the Azi-GPCR, probe the membrane with a commercial HRP antibody (see Table of Materials).
6. Perform enhanced chemiluminescence (ECL) reaction using homemade ECL reagent and detect signals for 5 min in the dark.

3. Ultrafast Bioorthogonal Labeling of GPCRs on Live Mammalian Cells

Note: The protocol is optimized for 4-well chambered coverslips (well area = 2.2 cm²). For different well sizes, the protocol must be scaled accordingly.

Surface coating of microscope slides. Carry out the whole procedure under a sterile hood.
1. Prepare a poly-D-lysine hydrobromide (MW=500-550 kDa) (PDL) stock solution at a concentration of 1 mg/mL in 50 mM borate buffer (pH 8.5). Store at 4 °C for up to 6 months. Do not freeze.
2. Dilute the PDL stock solution 1:40 in sterile ultra-pure water to a final concentration of 25 µg/mL (working solution), then filter the solution through a 0.22 µm sterile filter.
  Note: The working solution can be stored at 4 °C for up to 3 months.
3. Fully cover the bottom of each well of the microscopy slide with 500 µL of PDL working solution. Incubate for 20 min at RT and aspirate the PDL working solution.
  Note: The PDL working solution can be used up to three times. If the solution needs to be reused, transfer the used solution from the coated slides to a fresh sterile tube and label the tube accordingly. Never mix the recycled solution with fresh solution.
4. Rinse each well 3 x with ~ 700 µl sterile ultra-pure water and let dry for at least 1 h.
  Note: It is very important to rinse the wells accurately, as residues of the PDL solution are toxic to the cells. The coated slides can be used straight away for microscopy or stored for up to one week at 4 °C.
Maintain HEK293T cells in DMEM supplemented with 10 % (v/v) FBS, 100 U/mL penicillin and 100 µg/mL streptomycin at 37 °C, 95 % humidity and 5 % CO₂.
Seed cells the day before transfection.
1. Detach the cells for 5 min at 37 °C in 0.05 % Trypsin/PBS supplemented with 0.5 mM EDTA. Use 1 mL Trypsin/EDTA for a 10-cm dish. Quench with 10 volumes of complete medium and resuspend the cells by pipetting. Count the number of cells in the suspension using a hemocytometer⁴⁹.
2. Seed 1.0 x 10⁵HEK293T cells per well (area 2.2 cm²) in 600 µL dye free complete DMEM.
  Note: For imaging purposes, it is very convenient to work from the beginning in a medium that does not contain any dye. Dye free DMEM formulations are commercially available.
Control confluence (area occupied by the cells) under a microscope and transfect the cells at ~70 % confluence using a lipid-based transfection reagent.
1. 1 h prior to transfection, prepare a fresh 100 mM stock solution of TCO*K in 0.2 M NaOH and 15 % (v/v) DMSO.
2. Per well, mix 3 µl of the TCO*K stock solution with 12 µL of 1 M HEPES pH 7.4. Gently add the solution to the wells for a final TCO*K concentration of 0.5 mM.
3. Prepare a total amount of 500 ng DNA per well. In a microcentrifuge tube, dilute 200 ng of pcDNA3.1_CRF1R-95TAG-EGFP, 200 ng of the plasmid encoding for the MbPylRS^AF/tRNA^Pyl orthogonal pair (four cassettes of tRNA^M15) and 100 ng of pcDNA3.1_Arrestin3 plasmid in 50 µL medium (dye free, serum-free, antibiotic free).
  Note: In general, co-transfection of Arrestin is not necessary to observe GPCR internalization. However, co-transfecting Arrestin3 speeds up internalization of CRF1R, which is very convenient when analyzing internalization of many mutants.
4. Dilute 1.25 µL of the lipid-based transfection reagent (2.5 µL per 1 µg of DNA) in 50 µL medium (dye free, serum-free, antibiotic free) and add the solution to the DNA mixture. Vortex immediately and incubate 5-10 min at RT. Add DNA-lipid complexes to the cells.
  Note: In our experience, the morphology of cells transfected using lipid-based transfection looks more physiologic compared to that of cells transfected with PEI. As PEI gives higher transfection efficiency, PEI should be preferred for downstream applications like Western blot, whereas lipid-based transfection is a better choice to transfect cells for imaging experiments.
24 h post-transfection, label the receptor with fluorescent dyes.
1. Prepare a 0.5 mM dye-tetrazine stock solution in DMSO and a 10 mg/mL of DNA staining dye stock solution in ultra-pure H₂O.
2. Transfer 100 µL medium from each well into a 1.5 mL reaction tube. Add 1.8 µL of the dye-tetrazine stock solution and 0.3 µL of the DNA staining dye stock solution. Transfer the medium containing the dyes back to the well and incubate for 5 min at 37 °C.
  Note: Tetrazine-orange-fluorescent dye has a final concentration of 1.5 µM.
3. Aspirate the medium and gently rinse the cells twice with PBS to remove excess of dye. Add 600 µL of complete dye free growth medium preheated to 37 °C.
Fluorescence microscopy and receptor internalization.
1. Visualize the labeled receptors under 63x (or similar) magnification using filters appropriate for GFP (λ_abs: 488 nm; λ_em: 509 nm), orange-fluorescent dye (λ_abs: 550 nm; λ_em: 570 nm) and DNA staining dye (λ_abs: 350 nm; λ_em: 461 nm). Take a picture with each filter before activating the receptor.
2. Promote receptor internalization using 200 nM of Ucn1.
  1. Prepare a 1,000 x Ucn1 stock solution of 200 µM in DMSO.
    Note: Depending on the solubility of the peptide, you may be able to prepare the stock in pure water or buffer.
  2. Transfer 100 µL medium from a well into a 1.5 mL reaction tube and add 0.6 µL of the peptide agonist stock solution. Transfer the medium back into the well.
  3. Observe the internalization under the microscope. Take pictures after the clearly detectable occurrence of internalization (10-15 min to hours, depending on the receptor and overexpression of Arrestins) using the filters mentioned previously.

Representative Results

The outline of the fluorescence assay is depicted in Figure 1. The assay is employed in three applications. In first place, a number of tRNA variants for incorporation of Lys(Boc) by the Pyl orthogonal pair are screened. Lys(Boc) is an amino acid sterically similar to Pyl. As Pyl is not commercially available, Lys(Boc) is commonly used as a standard substrate for the PylRS. The screened tRNAs are based on the tRNA^Pyl. Each tRNA variant bears mutations of single bases or base-pairs in the loops and stems rationally designed to improve tRNA stability and compatibility with the eukaryotic translational machinery. All details about tRNA design are described in our recent work³⁰. Typical results are described in Figure 2A: different tRNAs give different suppression efficiency, which is clearly reflected in the amount of measured fluorescence. The small error bars of biological triplicates show that the values are highly reproducible. In second place, two gene variants of the E2AziRS²⁶^,⁵¹, which incorporates the photo-crosslinker p-azido-Phe (Azi), are evaluated. E2AziRS is derived from the E. coli TyrRS. One gene variant employed native E. coli codon usage, whereas the second was codon-optimized for the use in H. sapiens. The fluorescence assay shows that the codon-optimized variant gives higher protein yields (Figure 2B). Finally, the incorporation rate of different amino acids for bioorthogonal click chemistry are compared (Figure 2C). All the ncAAs presented here (BCNK, TCO*K and SCOK) are incorporated by the same orthogonal MbPylRSAF/tRNAPyl pair. Lys(Z) is also incorporated by this pair and was used as a positive control. To illustrate the reliability of the fluorescence assay, parallel ncAA incorporation experiments were performed on a GPCR, the CRF1R. Western blot analysis was carried out to estimate GPCR expression (Figure 2B, C). The same trends observed with EGFP in the fluorescence assay were observed with the CRF1R. Notably, Azi incorporation into CRF1R was highly enhanced when using the codon-optimized E2AziRS gene compared to the native gene, showing that even a moderate improvement of 1.5-2-fold for a soluble protein (EGFP) according to the fluorescence assay can have a greater impact on the expression level of more challenging membrane proteins (Figure 2B). As general note, with respect to the number of tRNA cassettes to be used for each application, only one tRNA cassette is recommended when screening different tRNAs in order to facilitate cloning procedures. When screening either different ncAARS or the incorporation efficiency of different ncAAs by the same orthogonal pair, four tandem repeats of the tRNA cassette are preferred to achieve the highest yields of ncAA incorporation.

The optimized system for Azi incorporation including the humanized E2AziRS gene was deployed to map the binding pocket of the CRF1R and define binding paths of 5 different ligands: the two peptide agonists Ucn1 and CRF, and the three peptide antagonists Ucn1(8-40), CRF (9-41) and ^dFXCRF(12-41) (Figure 3). While the efficiency of Azi incorporation was previously shown to decrease when approaching the GPCR C-terminus³³^,³⁴, our optimized system for Azi incorporation enables comparable expression levels of Azi-mutants with TAG-sites in different parts of the GPCR gene (Figure 4A). The results in Figure 4B show the screening of the extracellular loop 2 (ECL2) and helix V of CRF1R as a representative part of the ligand-binding pocket. A band at the correct size of the crosslinking product reveals that the position lies in the proximity of the ligand within the ligand-receptor complex, i.e. it is part of the binding pocket. Multiple crosslinking hits were found with all ligands tested, revealing distinct binding patterns for the peptide agonists and the antagonists. Notably, the pattern of crosslinking hits provides information about structural elements of the receptor. A number of successive hits, as observed in the ECL2 (positions F260-R263 in combination with antagonists) suggests a flexible loop region. A pattern of hits every three to four residues as found in helix V (D269/Y270, Y272/Q273, I277) hints towards a helical structure. The screen can be extended to all relevant domains of the GPCR. If a 3D structure or a molecular model of the receptor exists, ligand footprints can be visualized by highlighting the crosslinking hits for each ligand (Figure 5).

Both fluorescence and Western blot data (Figure 2C) suggest that TCO*K is the ncAA for bioorthogonal chemistry that gets incorporated with the highest efficiency by the MbPylRS^AF. Different PylRS mutants might give higher incorporation yields of other click ncAAs¹⁷, but they were not tested in this study. TCO*K was incorporated into a CRF1R-EGFP fusion protein and enabled installing via SPIEDAC chemistry (Figure 6A) a small bright fluorophore on the receptor (Figure 6B). As a proof of specific labeling, the fluorescence of the label should be visible only in cells expressing the receptor (green cells in Figure 6B) and not in dark cells, which thus provide an internal negative control in each experiment. Receptors labeled using ultrafast SPIEDAC chemistry are still functional. After adding a peptide agonist, fluorescent compartments were observed throughout the cytosol, revealing the physiological process of GPCR internalization (Figure 6C). The signals of the fused EGFP co-localized with the fluorescent dye at all times, confirming the selective biorthogonal labeling of the GPCR.

Figure 1: Fluorescence-based assay to evaluate the efficiency of stop codon suppression. HEK293 cells are co-transfected with two plasmids in the presence of the ncAA. One plasmid encodes for the desired ncAARS and suppressor-tRNA. The second plasmid encodes for the EGFP gene bearing a TAG stop codon at a permissive site together with a mCherry control. Two days after transfection, the green and red fluorescence of whole-cell lysates are measured in a plate reader. As the EGFP N-segment upstream the stop codon (grey) is not fluorescent, the yield of full-length EGFP (green) directly correlates to the efficiency of ncAA incorporation, while mCherry (red) provides an independent reference for normalization. The efficiency of the orthogonal system is given by the ratio between the amount of EGFP obtained via stop codon suppression and the amount of wild-type EGFP obtained by regular translation (no amber suppression). The figure is modified from Serfling, R. & Coin, I; Incorporation of Unnatural Amino Acids into Proteins Expressed in Mammalian Cells, Methods in Enzymology, 2016, 580, 89-107.²⁹ Reproduction was permitted by the Copyright Clearance Center of Elsevier. Please click here to view a larger version of this figure.

Figure 2: Representative applications of the fluorescence assay. (A) Screening of tRNA^Pyl variants³⁰. HEK293 cells were co-transfected with the reporter plasmid and plasmids encoding for the MbPylRS/tRNA pair (one copy tRNA). Bars represent the relative fluorescence of EGFP obtained from the incorporation of Lys(Boc) compared to wild-type EGFP. (B) Evaluating the influence of codon-usage for ncAARS genes. (left panel) Fluorescence assay of cells transfected with two different gene variants of E2AziRS. (1) codon usage from E. coli and (2) humanized gene. (right panel) Western blot analysis of CRF1R^95Azi-FLAG. The full-length receptor is detected by an anti-FLAG antibody. Actin β was used as loading control. (C) Evaluating the incorporation efficiency of three ncAAs designed for bioorthogonal chemistry. (left panel) Structures of ncAAs used in this experiment. (1) LysZ, which was used as positive control, (2) BCNK, (3) TCO*K and (4) SCOK. (central panel) Fluorescence assay of HEK293 cells transfected with a plasmid encoding for MbPylRS^AF and four copies of tRNA15 from (A) to incorporate (1), (2), (3) and (4). (right panel) Western blot analysis of a CRF1R-FLAG mutant bearing one of the four ncAAs at position 95. Actin β was used as loading control. Panel A was adapted from Serfling, R. et al. Designer tRNAs for efficient incorporation of non-canonical amino acids by the pyrrolysine system in mammalian cells Nucleic Acids Res. 46 (1), 1-10 (2018) and are reproduced according to the Creative Commons Attribution license. Please click here to view a larger version of this figure.

Figure 3: Schematic representation of the Azi-mediated photo-crosslinking mapping. A photo-activatable azido function (yellow star) is placed into a defined position within the receptor (grey). When the azido group is located proximal to the bound ligand (red), a covalent crosslinking product is formed upon UV irradiation (yellow circle indicates crosslinking site). The incorporation of the azido group into different positions of the receptor reveals the binding surface (purple) of the ligand, which represents the binding pocket. Please click here to view a larger version of this figure.

Figure 4: Incorporation of Azi throughout CRF1R for photo-crosslinking mapping of the binding pocket. (A) Comparison of expression levels of Azi-CRF1R-FLAG mutants towards wild-type receptor. The Azi incorporation sites are distributed throughout the whole receptor as indicated in the top row. Anti-FLAG Western blots of whole-cell lysates are shown. Actin β was used as loading control. (B) Western blots probed with either anti-CRF or anti-Ucn1 antibodies are shown. The residues replaced by Azi are indicated in the upper row. The cells were incubated with the ligands listed on the right, followed by UV irradiation at 365 nm and lysis. The samples were resolved on 10 % SDS-PAGE, deglycosylated using PNGase F and analyzed by Western blotting. The deglycosylated ligand-CRF1R complex runs at an apparent MW of ~40 kDa³³. The non-crosslinked ligand is not detected (MW ~3-4 kDa). Both panels of this figure have been modified from Seidel, L. et al. Structural insight into the activation of a class B G-protein-coupled receptor by peptide hormones in live human cells. Elife.6 10.7554/eLife.27711 and are reproduced according to the Creative Commons Attribution license. Please click here to view a larger version of this figure.

Figure 5: Footprints of peptide agonists and antagonists on the class B GPCR CRF1R. Surface representation of the CRF1R transmembrane domain. Positions of CRF1R that crosslinked the ligand when substituted by Azi are highlighted. Footprints of the peptide agonists CRF and Ucn1 are highlighted in magenta, footprints of the antagonists CRF (9-41) and Ucn1(8-40) in blue. The footprint of the antagonist ^dFXCRF(12-41) is highlighted in orange. The seven transmembrane helices I-VII are indicated by roman numbers. (A, B) Side views of the binding pocket from the membrane plane. (C) Top view into the binding pocket from the extracellular side. Reprinted from Seidel, L. et al. Structural insight into the activation of a class B G-protein-coupled receptor by peptide hormones in live human cells. Elife.6 10.7554/eLife.27711 and are reproduced according to the Creative Commons Attribution license. Please click here to view a larger version of this figure.

Figure 6: SPIEDAC labeling of CRF1R on live cells. (A) Reaction scheme of the strain-promoted inverse electron-demand Diels-Alder cycloaddition (SPIEDAC): the trans-cyclo-2-octene group of the ncAA TCO*K reacts with the tetrazine group linked to the fluorophore Cy3. (B, C) HEK293T cells expressing CRF1R^95TCO*K-EGFP. Representative images of the green, red and blue channel. The size of the scale bar is 10 µm. (B) Cells were treated with tetrazine-Cy3 (1.5 µM) for 5 min. Only cells expressing the receptor (green) show occurrence of labeling (red). (C) Cells were treated with 200 nM Ucn1 and imaged after 15 min. Intracellular vesicles correspond to the internalized receptor. Panels B and C are modified from Serfling, R. et al. Designer tRNAs for efficient incorporation of non-canonical amino acids by the pyrrolysine system in mammalian cells Nucleic Acid Res. 46 (1) 1-10 (2018) (Oxford University Press) and are reproduced according to the Creative Commons Attribution license. Please click here to view a larger version of this figure.

Discussion

The protocol describes a simple and reliable assay to assess the efficiency of orthogonal pairs for the incorporation of ncAAs into proteins expressed in mammalian cells. The main advantage of this method in respect to widely used assays based on FACS is that it allows the simultaneous preparation and measurement of larger numbers of samples, and provides data that are easily analyzed using an ordinary software. The availability of a medium-throughput method to analyze orthogonal pairs in mammalian cells is very important for the development of new orthogonal pairs and the improvement of existing ones. Indeed, it is not possible to perform directed evolution of orthogonal pairs via the generation of large random libraries and dead/alive selection in mammalian systems. The assay allows screening small sized libraries (hundreds of members) by investing a reasonable experimental effort within a relatively short time. By screening rationally designed tRNA sets via this assay, we could generate novel tRNAs that significantly boost the efficiency of the pyrrolysine system³⁰. The classic combination EGFP/mCherry is used for the fluorescent read-out, whereby EGFP serves as reporter of incorporation efficiency and mCherry as the internal control. The EGFP reporter and the mCherry control are harbored in the same plasmid but are embedded in two separate expression cassettes bearing two independent promoters. In this way, mCherry expression relates to the transfection efficiency and cell count, but is independent of EGFP expression, so that the measured green fluorescence can be normalized to the red fluorescence. This is not exactly the case of other reporters built as a tandem of the two proteins such as EGFP-TAG-mCherry⁷ and iRFP-GFP^Y39TAG (with iRFP denoting the infrared fluorescent protein)⁵². In such constructs, both proteins are on the same mRNA transcript. In eukaryotes, mRNAs bearing premature stop codons undergo surveillance and degradation by the nonsense-mediated decay (NMD) mechanism⁵³. Therefore, both the sequence of the reporter and the control are simultaneously degraded and expression of the two genes is not strictly independent. Similar assays based on a luciferase reporter instead of a fluorescence reporter have been described by others⁵⁴^,⁵⁵. While enzymatic luminescence offers higher sensitivity than fluorescence measurements, the latter showed higher reproducibility between different cell batches.

Robust systems for ncAA incorporation in mammalian cells are absolutely needed when working with demanding protein targets like membrane proteins and low abundant proteins. We have shown here an optimized orthogonal pair for robust incorporation of the photo-activatable ncAA Azi into GPCRs. The system gives homogeneous Azi incorporation rates throughout the whole receptor that allows for the systematic photo-crosslinking mapping of entire GPCR surfaces and identification of ligand binding sites. The two major points of strength of the method are that different ligands can be analyzed on the same receptor in parallel and that the data are derived from the receptor in the live cell, which complements information obtained from in vitro approaches. The method is in principle applicable to any protein target, and is suitable also to map topologies of protein-protein interactions. Moreover, the identified subset of crosslinked positions can further be analyzed with 2D crosslinking to pin-point intermolecular pairs of proximal amino acids in the associated complex³³^,³⁸. Such amino acid pairs provide spatial constraints that are applied to in silico experiments to build accurate molecular models of the interaction³³^,³⁸. From the methodical point of view, it is worth remarking that only positive results from crosslinking experiments should be considered. A position that did not crosslink can still be within the critical radius from the ligand. False negatives can occur when the mutation introduced by the crosslinker hampers the native interaction, but can also occur when the crosslinking moiety either points away from the ligand, or is quenched by the solvent, or undergoes intramolecular crosslinking. A crucial part of the method is how to detect the occurrence of crosslinking. In the first place, whole-cell lysates are resolved on SDS-PAGE to separate any ligand that is not covalently bound to the receptor. Second, the covalent ligand-receptor complex is detected via Western blotting using an anti-ligand antibody. For peptide ligands, high-affinity polyclonal antibodies raised against the ligand are the optimal choice. As an alternative, peptide ligands can be equipped with a FLAG-tag at a permissive position, provided the tag is made accessible to the anti-FLAG antibody through a suitable spacer. Biotin tags can also be used, although results may be difficult to interpret due to the background by endogenous biotinylated proteins. Small molecule ligands are usually radiolabeled, although tag-labeling may also be possible⁵⁶^,⁵⁷. Protocols for Azi incorporation into GPCRs have been published also by others⁵⁷^,⁵⁸^,⁵⁹. However, these protocols involve the use of three plasmids for Azi incorporation, whereas we use a simpler two-plasmid system, including a humanized gene for E2AziRS, which gives better outcome with respect to the non-codon-optimized one (Figure 2B).

Modern microscopy techniques require installing very bright and efficient fluorophores into the protein of interest, as genetically encoded protein fluorophores such as the classic EGFP are not suitable for high-end applications. Therefore, there is a continuous search of methods that enable installing organic fluorophores onto proteins, which has led to the development of the popular SNAP⁶⁰ and Halo⁶¹ tags, between others. However, such tags still have a size of several kDa, which may perturb the function of the target protein and leave quite a large uncertainty about the exact position of the fluorophore. With a minimal size of a few amino acids, the tetracysteine motif represents a smaller alternative for more precise labeling using fluorescein or resorufin arsenical compounds (FlAsH, ReAsH)⁶²^,⁶³. Although this approach has been applied very successfully also to GPCR studies⁶⁴^,⁶⁵^,⁶⁶, it requires extensive washing steps with thiols, it suffers often from high background, and in any case, it does not allow positioning the label with single residue resolution. Instead, ncAAs equipped with bioorthogonal anchors offer the possibility of installing fluorescent labels at a single amino acid position, thus minimizing the risk of interfering with the native conformation and functionality of the target protein. Last-generation ncAAs for bioorthogonal chemistry, like the TCO*K¹³ employed here, have enabled protein labeling directly on live cells¹⁷^,⁴³. The method is applicable to protein targets on the cell surface, but also on intracellular targets, provided that suitable cell-permeable dyes are available¹⁷^,⁶⁷^,⁶⁸. SPIEDAC chemistry is several orders of magnitude faster in respect to strain-promoted azido-alkyne cycloaddition (SPAAC) and Staudinger Bertozzi ligations on azide anchors²^,¹³. In fact, several protocols have been published for GPCR labeling on genetically incorporated Azi, but they are applicable only to isolated GPCRs in vitro³⁷^,⁵⁹^,⁶⁹. Instead, we have demonstrated here smooth bioorthogonal labeling of functional GPCRs on the live cell. Our protocol is similar to existing protocols using the same chemistry⁴³^,⁴⁸^,⁷⁰, but our optimized ncAA incorporation system expands the scope of the method to GPCR studies. A critical step in the experimental procedure is the choice of the position to be exchanged with TCO*K, as not all positions within the receptor are either permissive for a replacement or accessible to the fluorescent dye. Therefore, several positions should be tested in a preliminary screen to find the most suitable one.

In conclusion, this work presents tools for general application of ncAAs, including application to challenging protein targets such as GPCRs. We anticipate that photo-crosslinking mapping and bioorthogonal labeling, nowadays the main applications of ncAAs to GPCR studies, will find many future applications both to unveil topologies of GPCR interactions with ligands or other proteins and to study GPCR structural dynamics in the live cell.

開示

The authors have nothing to disclose.

Acknowledgements

This work has been founded by the Deutsche Forschungsgemeinschaft (DFG) under grants CO822/2-1 (Emmy-Noether program) and CO822/3-1 to I.C.

Materials

Chemicals
Acryamide/Bisacrylamide 30% (37,5:1)	Carl Roth	3029.1
Ammonium persulfate (APS)	Carl Roth	9592.2
p-Azidophenylalanine (Azi)	Bachem	F-3075.0001
Boric acid	Sigma Aldrich	B6768
Bromphenolblue	Sigma-Aldrich	B0126-25G
Bovine serum albumine (BSA)	Carl Roth	8076.2
Carbobenzyloxy-L-lysine (Lys(Z))	NovaBiochem	8540430100
Cyclooctyne-L-lysine (SCOK)	Sichem	SC-8000
DMEM	Life Technologies	41966052
DMSO	Carl Roth	A994.2
DTT	Carl Roth	6908.1
enhanced chemiluminescence reagent (ECL)	home-made		10 mg/l luminol in 0.1 M Tris-HCl pH 8.6 ; 1100 mg/l p-coumaric acid in DMSO ; 30 % H₂O₂ (1,000 : 100 : 0.3) [Quelle Laborjounal]
EDTA	Carl Roth	8043.1
EGTA	Carl Roth	3054.1
endo-bicyclo[6.1.0]nonyne-L-lysine (BCNK)	Sichem	SC-8014
FBS	Thermo Fisher (Gibco)	10270106
FluoroBrite DMEM	Thermo Fisher (Gibco)	A1896701
Glycerol	Carl Roth	7533.1
Glycin	Carl Roth	3908.3
HEPES	Carl Roth	9105.3
Hoechst 33342	Sigma Aldrich	B2261
KCl	Carl Roth	6781.3
Lipofectamine 2000	Thermo Fisher	11668019
Luminol	Applichem	A2185,0005
Methanol	Carl Roth	0082.3
MgCl₂	Carl Roth	2189.2
NaCl	Carl Roth	HN00.2
Na-Lactate	Sigma-Aldrich	71718-10G
NaOH	Grüssing	121551000
PBS	Sigma-Aldrich	P5493-1L
p-Coumaric acid	Sigma-Aldrich	C9008-1G
poly-D-lysine hydrobromide	Corning	354210
PEI	Polysciences	23966
Penicillin/Streptomycin	Thermo Fisher (Gibco)	11548876 (15140-122)
PMSF	Carl Roth	6367.1
PNGase F	NEB	P0704L
Protease Inhibitor	Roche	11873580001
PVDF membrane Immobilon-P	Millipore	IPVH00010
Skim Milk Powder	Sigma	70166
Sodium dodecyl sulfate (SDS)	Carl Roth	CN30.2
Tetrazine-Cy3	Jena Bioscience	CLK-014-05
Tetramethylethylenediamine (TEMED)	Carl Roth	2367.3
trans-Cyclooctene-L-lysine (TCO*K)	Sichem	SC-8008
TRIS	Sigma-Aldrich	T1503
Triton X-100	Carl Roth	3051.4
Trypsin 2.5%	Thermo Fisher (Gibco)	15090046
Tween 20	Carl Roth	9127.2
Wasserstoffperoxid (30%)	Merck	1.07210.0250
Cell lines
HEK293 cells	German Collection of Microorganisms and Cell Cultures GmbH (DSMZ)	ACC-305
HEK293T cells	German Collection of Microorganisms and Cell Cultures GmbH (DSMZ)	ACC-635
Equipment
Crosslinker Bio-Link 365 nm	Bio-Budget Technologies GmbH	40-BLX-E365	5 x 8 Watt tubes
Plate Reader BMG LABTECH FLUOstar Omega	BMG LABTECH
Plasmids
Plasmid E2AziRS	The huminized gene for E2AziRS was synthesized by Geneart (Life Technologies)		Plasmid containing 4 tandem copies of the suppressor tRNA Bst-Yam driven by the human U6 promoter and one copy of a humanized gene for the enhanced variant of the Azi-tRNA synthetase (EAziRS) driven by a PGK promoter
POI-TAG mutant plasmids			Plasmid encoding the POI driven by the CMV promoter, C-terminally fused to the FLAG-tag, bearing a TAG codon at the desired position
CRF1R-95TAG-EGFP			Cloned in the MCS of pcDNA3.1
HA-PTH1R-79TAG-CFP			Cloned in the MCS of pcDNA3.1
Arrestin3-FLAG	Synthesized by Genart (Life Technologies)		Cloned in the MCS of pcDNA3.1
Antibodies
Anti-FLAG-HRP M2 antibody conjugate	Sigma-Aldrich	A8592	monoclonal, produced in mouse clone M2
Goat-anti-rabbit-HRP antibody	Santa Cruz	sc-2004
Rabbit-anti-CRF antibody	home-made	PBL #rC69	polyclonal [Turnbull]
Rabbit-anti-Ucn1 antibody	home-made	PBL #5779	polyclonal [Turnbull]

参考文献

Liu, C. C., Schultz, P. G. Adding new chemistries to the genetic code. Annu Rev Biochem. 79, 413-444 (2010).
Lang, K., Chin, J. W. Cellular incorporation of unnatural amino acids and bioorthogonal labeling of proteins. Chemical reviews. 114 (9), 4764-4806 (2014).
Wan, W., Tharp, J. M., Liu, W. R. Pyrrolysyl-tRNA synthetase: an ordinary enzyme but an outstanding genetic code expansion tool. Biochim Biophys Acta. 1844 (6), 1059-1070 (2014).
Wang, L. Genetically encoding new bioreactivity. N Biotechnol. 38 (Pt A), 16-25 (2017).
Zhang, M., et al. A genetically incorporated crosslinker reveals chaperone cooperation in acid resistance. Nat Chem Biol. 7 (10), 671-677 (2011).
Wu, N., Deiters, A., Cropp, T. A., King, D., Schultz, P. G. A genetically encoded photocaged amino acid. Journal of the American Chemical Society. 126 (44), 14306-14307 (2004).
Gautier, A., et al. Genetically encoded photocontrol of protein localization in mammalian cells. J Am Chem Soc. 132 (12), 4086-4088 (2010).
Arbely, E., Torres-Kolbus, J., Deiters, A., Chin, J. W. Photocontrol of tyrosine phosphorylation in mammalian cells via genetic encoding of photocaged tyrosine. J Am Chem Soc. 134 (29), 11912-11915 (2012).
Luo, J., et al. Genetically encoded optochemical probes for simultaneous fluorescence reporting and light activation of protein function with two-photon excitation. J Am Chem Soc. 136 (44), 15551-15558 (2014).
Bose, M., Groff, D., Xie, J., Brustad, E., Schultz, P. G. The incorporation of a photoisomerizable amino acid into proteins in E. coli. J Am Chem Soc. 128 (2), 388-389 (2006).
Hoppmann, C., et al. Genetically Encoding Photoswitchable Click Amino Acids in Escherichia coli and Mammalian Cells. Angew Chem Int Ed Engl. 53 (15), 3932-3936 (2014).
Borrmann, A., et al. Genetic encoding of a bicyclo[6.1.0]nonyne-charged amino acid enables fast cellular protein imaging by metal-free ligation. Chembiochem. 13 (14), 2094-2099 (2012).
Nikic, I., et al. Minimal tags for rapid dual-color live-cell labeling and super-resolution microscopy. Angew Chem Int Ed Engl. 53 (8), 2245-2249 (2014).
Plass, T., Milles, S., Koehler, C., Schultz, C., Lemke, E. A. Genetically encoded copper-free click chemistry. Angew Chem Int Ed Engl. 50 (17), 3878-3881 (2011).
Plass, T., et al. Amino acids for Diels-Alder reactions in living cells. Angew Chem Int Ed Engl. 51 (17), 4166-4170 (2012).
Lang, K., et al. Genetically encoded norbornene directs site-specific cellular protein labelling via a rapid bioorthogonal reaction. Nature Chemistry. 4 (4), 298-304 (2012).
Lang, K., et al. Genetic Encoding of bicyclononynes and trans-cyclooctenes for site-specific protein labeling in vitro and in live mammalian cells via rapid fluorogenic Diels-Alder reactions. J Am Chem Soc. 134 (25), 10317-10320 (2012).
Summerer, D., et al. A genetically encoded fluorescent amino acid. Proc Natl Acad Sci U S A. 103 (26), 9785-9789 (2006).
Wang, J., Xie, J., Schultz, P. G. A genetically encoded fluorescent amino acid. J Am Chem Soc. 128 (27), 8738-8739 (2006).
Chatterjee, A., Guo, J., Lee, H. S., Schultz, P. G. A genetically encoded fluorescent probe in mammalian cells. J Am Chem Soc. 135 (34), 12540-12543 (2013).
Lee, H. S., Guo, J., Lemke, E. A., Dimla, R. D., Schultz, P. G. Genetic incorporation of a small, environmentally sensitive, fluorescent probe into proteins in Saccharomyces cerevisiae. J Am Chem Soc. 131 (36), 12921-12923 (2009).
Neumann, H., Peak-Chew, S. Y., Chin, J. W. Genetically encoding N(epsilon)-acetyllysine in recombinant proteins. Nat Chem Biol. 4 (4), 232-234 (2008).
Nguyen, D. P., Garcia Alai, M. M., Kapadnis, P. B., Neumann, H., Chin, J. W. Genetically encoding N(epsilon)-methyl-L-lysine in recombinant histones. Journal of the American Chemical Society. 131 (40), 14194-14195 (2009).
Hoppmann, C., et al. Site-specific incorporation of phosphotyrosine using an expanded genetic code. Nat Chem Biol. 13 (8), 842-844 (2017).
Schmidt, M. J., Borbas, J., Drescher, M., Summerer, D. A genetically encoded spin label for electron paramagnetic resonance distance measurements. J Am Chem Soc. 136 (4), 1238-1241 (2014).
Chin, J. W., et al. An expanded eukaryotic genetic code. Science. 301 (5635), 964-967 (2003).
Sakamoto, K., et al. Site-specific incorporation of an unnatural amino acid into proteins in mammalian cells. Nucleic Acids Research. 30 (21), 4692-4699 (2002).
Lemke, E. A., Summerer, D., Geierstanger, B. H., Brittain, S. M., Schultz, P. G. Control of protein phosphorylation with a genetically encoded photocaged amino acid. Nat Chem Biol. 3 (12), 769-772 (2007).
Serfling, R., Coin, I. Incorporation of Unnatural Amino Acids into Proteins Expressed in Mammalian Cells. Methods Enzymol. 580, 89-107 (2016).
Serfling, R., et al. Designer tRNAs for efficient incorporation of non-canonical amino acids by the pyrrolysine system in mammalian cells. Nucleic Acids Res. , (2017).
Wang, W. Y., et al. Genetically encoding unnatural amino acids for cellular and neuronal studies. Nature Neuroscience. 10 (8), 1063-1072 (2007).
Chatterjee, A., Xiao, H., Bollong, M., Ai, H. W., Schultz, P. G. Efficient viral delivery system for unnatural amino acid mutagenesis in mammalian cells. Proc Natl Acad Sci U S A. 110 (29), 11803-11808 (2013).
Coin, I., et al. Genetically encoded chemical probes in cells reveal the binding path of urocortin-I to CRF class B GPCR. Cell. 155 (6), 1258-1269 (2013).
Coin, I., Perrin, M. H., Vale, W. W., Wang, L. Photo-Cross-Linkers Incorporated into G-Protein-Coupled Receptors in Mammalian Cells: A Ligand Comparison. Angew Chem Int Ed Engl. 50, 8077-8081 (2011).
Ye, S., et al. Tracking G-protein-coupled receptor activation using genetically encoded infrared probes. Nature. 464 (7293), 1386-1389 (2010).
Damian, M., et al. Ghrelin receptor conformational dynamics regulate the transition from a preassembled to an active receptor:Gq complex. Proc Natl Acad Sci U S A. 112 (5), 1601-1606 (2015).
Tian, H., Furstenberg, A., Huber, T. Labeling and Single-Molecule Methods To Monitor G Protein-Coupled Receptor Dynamics. Chem Rev. 117 (1), 186-245 (2017).
Seidel, L., Zarzycka, B., Zaidi, S. A., Katritch, V., Coin, I. Structural insight into the activation of a class B G-protein-coupled receptor by peptide hormones in live human cells. Elife. 6, (2017).
Grunbeck, A., et al. Genetically encoded photo-cross-linkers map the binding site of an allosteric drug on a G protein-coupled receptor. ACS Chem Biol. 7 (6), 967-972 (2012).
Koole, C., et al. Genetically encoded photocross-linkers determine the biological binding site of exendin-4 peptide in the N-terminal domain of the intact human glucagon-like peptide-1 receptor (GLP-1R). J Biol Chem. 292 (17), 7131-7144 (2017).
Rannversson, H., et al. Genetically encoded photocrosslinkers locate the high-affinity binding site of antidepressant drugs in the human serotonin transporter. Nat Commun. 7, 11261 (2016).
Valentin-Hansen, L., et al. Mapping substance P binding sites on the neurokinin-1 receptor using genetic incorporation of a photoreactive amino acid. Journal of Biological Chemistry. 289 (26), 18045-18054 (2014).
Nikic, I., Kang, J. H., Girona, G. E., Aramburu, I. V., Lemke, E. A. Labeling proteins on live mammalian cells using click chemistry. Nat Protoc. 10 (5), 780-791 (2015).
Kaya, E., et al. A genetically encoded norbornene amino acid for the mild and selective modification of proteins in a copper-free click reaction. Angew Chem Int Ed Engl. 51 (18), 4466-4469 (2012).
Elliott, T. S., et al. Proteome labeling and protein identification in specific tissues and at specific developmental stages in an animal. Nature Biotechnology. 32 (5), 465-472 (2014).
Yu, Z., Pan, Y., Wang, Z., Wang, J., Lin, Q. Genetically encoded cyclopropene directs rapid, photoclick-chemistry-mediated protein labeling in mammalian cells. Angew Chem Int Ed Engl. 51 (42), 10600-10604 (2012).
Mayer, S., Lang, K. Tetrazines in Inverse-Electron-Demand Diels-Alder Cycloadditions and Their Use in Biology. Synthesis-Stuttgart. 49 (4), 830-848 (2017).
Lang, K., Davis, L., Chin, J. W. Genetic encoding of unnatural amino acids for labeling proteins. Methods Mol Biol. 1266, 217-228 (2015).
Phelan, K., May, K. M. Basic techniques in mammalian cell tissue culture. Curr Protoc Cell Biol. 66, 1-22 (2015).
Fukumoto, Y., et al. Cost-effective gene transfection by DNA compaction at pH 4.0 using acidified, long shelf-life polyethylenimine. Cytotechnology. 62 (1), 73-82 (2010).
Takimoto, J. K., Adams, K. L., Xiang, Z., Wang, L. Improving orthogonal tRNA-synthetase recognition for efficient unnatural amino acid incorporation and application in mammalian cells. Mol Biosyst. 5 (9), 931-934 (2009).
Nikic, I., et al. Debugging Eukaryotic Genetic Code Expansion for Site-Specific Click-PAINT Super-Resolution Microscopy. Angew Chem Int Ed Engl. 55 (52), 16172-16176 (2016).
Lykke-Andersen, S., Jensen, T. H. Nonsense-mediated mRNA decay: an intricate machinery that shapes transcriptomes. Nat Rev Mol Cell Biol. 16 (11), 665-677 (2015).
Schmied, W. H., Elsasser, S. J., Uttamapinant, C., Chin, J. W. Efficient multisite unnatural amino acid incorporation in mammalian cells via optimized pyrrolysyl tRNA synthetase/tRNA expression and engineered eRF1. J Am Chem Soc. 136 (44), 15577-15583 (2014).
Ye, S. X., et al. Site-specific incorporation of keto amino acids into functional G protein-coupled receptors using unnatural amino acid mutagenesis. Journal of Biological Chemistry. 283 (3), 1525-1533 (2008).
Grunbeck, A., Huber, T., Sachdev, P., Sakmar, T. P. Mapping the ligand-binding site on a G protein-coupled receptor (GPCR) using genetically encoded photocrosslinkers. 生化学. 50 (17), 3411-3413 (2011).
Grunbeck, A., Huber, T., Sakmar, T. P. Mapping a ligand binding site using genetically encoded photoactivatable crosslinkers. Methods Enzymol. 520, 307-322 (2013).
Naganathan, S., Grunbeck, A., Tian, H., Huber, T., Sakmar, T. P. Genetically-encoded molecular probes to study G protein-coupled receptors. J Vis Exp. (79), (2013).
Huber, T., Naganathan, S., Tian, H., Ye, S., Sakmar, T. P. Unnatural amino acid mutagenesis of GPCRs using amber codon suppression and bioorthogonal labeling. Methods Enzymol. 520, 281-305 (2013).
Gronemeyer, T., Chidley, C., Juillerat, A., Heinis, C., Johnsson, K. Directed evolution of O6-alkylguanine-DNA alkyltransferase for applications in protein labeling. Protein Eng Des Sel. 19 (7), 309-316 (2006).
Los, G. V., et al. HaloTag: a novel protein labeling technology for cell imaging and protein analysis. ACS Chem Biol. 3 (6), 373-382 (2008).
Griffin, B. A., Adams, S. R., Tsien, R. Y. Specific covalent labeling of recombinant protein molecules inside live cells. Science. 281 (5374), 269-272 (1998).
Adams, S. R., et al. New biarsenical ligands and tetracysteine motifs for protein labeling in vitro and in vivo: synthesis and biological applications. J Am Chem Soc. 124 (21), 6063-6076 (2002).
Hoffmann, C., et al. A FlAsH-based FRET approach to determine G protein-coupled receptor activation in living cells. Nature Methods. 2 (3), 171-176 (2005).
Nuber, S., et al. beta-Arrestin biosensors reveal a rapid, receptor-dependent activation/deactivation cycle. Nature. 531 (7596), 661-664 (2016).
Lee, M. H., et al. The conformational signature of beta-arrestin2 predicts its trafficking and signalling functions. Nature. 531 (7596), 665-668 (2016).
Uttamapinant, C., et al. Genetic code expansion enables live-cell and super-resolution imaging of site-specifically labeled cellular proteins. J Am Chem Soc. 137 (14), 4602-4605 (2015).
Knorr, G., Kozma, E., Herner, A., Lemke, E. A., Kele, P. New Red-Emitting Tetrazine-Phenoxazine Fluorogenic Labels for Live-Cell Intracellular Bioorthogonal Labeling Schemes. 化学. 22 (26), 8972-8979 (2016).
Park, M., Tian, H., Naganathan, S., Sakmar, T. P., Huber, T. Quantitative Multi-color Detection Strategies for Bioorthogonally Labeled GPCRs. Methods Mol Biol. 1335, 67-93 (2015).
Tyagi, S., Lemke, E. A. Genetically encoded click chemistry for single-molecule FRET of proteins. Methods Cell Biol. 113, 169-187 (2013).

Play Video

PDF

DOI

DOWNLOAD MATERIALS LIST

記事を引用

Serfling, R., Seidel, L., Böttke, T., Coin, I. Optimizing the Genetic Incorporation of Chemical Probes into GPCRs for Photo-crosslinking Mapping and Bioorthogonal Chemistry in Live Mammalian Cells. J. Vis. Exp. (134), e57069, doi:10.3791/57069 (2018).

Optimizing the Genetic Incorporation of Chemical Probes into GPCRs for Photo-crosslinking Mapping and Bioorthogonal Chemistry in Live Mammalian Cells