Rivista
/
Ingegneria
/
Cutting Procedures, Tensile Testing, and Ageing of Flexible Unidirectional Composite Laminates
JoVE Journal
Ingegneria
È necessario avere un abbonamento a JoVE per visualizzare questo.  Accedi o inizia la tua prova gratuita.
JoVE Journal Ingegneria
Cutting Procedures, Tensile Testing, and Ageing of Flexible Unidirectional Composite Laminates

Cutting Procedures, Tensile Testing, and Ageing of Flexible Unidirectional Composite Laminates

DOI:
10.3791/58991-v

•

07:53 min

•

April 27, 2019

•

, , , ,
1Material Measurement Laboratory,National Institute of Standards and Technology, 2Theiss Research, 3Chemical and Biomolecular Engineering Department,University of Maryland

Capitoli

  • 00:04Titolo
  • 00:38Cutting Procedure for Warp-direction Specimens, Cut Perpendicular to Roll Axis
  • 03:00Tensile Testing of Unidirectional Laminate Specimens
  • 04:36Beginning an Aging Experiment
  • 05:23Extracting Aged Material Strips for Analysis
  • 06:33Results: Load versus Extension Plots and Failure Stress Distributions
  • 07:27Conclusion

Summary

Traduzione automatica

Traduzione automatica

The goal of the study was to develop protocols to prepare consistent specimens for accurate mechanical testing of high-strength aramid or ultra-high-molar-mass polyethylene-based flexible unidirectional composite laminate materials and to describe protocols for performing artificial ageing on these materials.

Tags

Unidirectional CompositeFlexible CompositeTensile TestingCutting ProcedureAgeingFiber DirectionSpecimen PreparationSoft Body Armor

Article

Embed

AGGIUNGI ALLA PLAYLIST

Usage Statistics

Video correlati

Ultrasonic Welding of Thermoplastic Composite Coupons for Mechanical Characterization of Welded Joints through Single Lap Shear Testing

Testing of Nanoparticle Release from a Composite Containing Nanomaterial Using a Chamber System

Wicking Tests for Unidirectional Fabrics: Measurements of Capillary Parameters to Evaluate Capillary Pressure in Liquid Composite Molding Processes

Magnet Assisted Composite Manufacturing: A Flexible New Technique for Achieving High Consolidation Pressure in Vacuum Bag/Lay-Up Processes

Artificial Thermal Ageing of Polyester Reinforced and Polyvinyl Chloride Coated Technical Fabric

Calibration Procedures for Orthogonal Superposition Rheology

Performing Microscope-Mounted Y-Shaped Cutting Tests

Author Spotlight: Enhancing Fiber Composite Laminate Quality with the Wet Hand Lay-Up/Vacuum Bag Process

Author Spotlight: Development and Application of SERS Flexible Substrates Using Synthesized AgNPs

Fabrication of Glass Fiber-Reinforced Polymer (GFRP) Composite Laminates by Wet Hand Lay-Up/Vacuum Bag (WLVB) Method

Read Article