Journal
/
Ingeniería
/
Cutting Procedures, Tensile Testing, and Ageing of Flexible Unidirectional Composite Laminates
JoVE Revista
Ingeniería
Se requiere una suscripción a JoVE para ver este contenido.  Inicie sesión o comience su prueba gratuita.
JoVE Revista Ingeniería
Cutting Procedures, Tensile Testing, and Ageing of Flexible Unidirectional Composite Laminates

Cutting Procedures, Tensile Testing, and Ageing of Flexible Unidirectional Composite Laminates

DOI:
10.3791/58991-v

•

07:53 min

•

April 27, 2019

•

, , , ,
1Material Measurement Laboratory,National Institute of Standards and Technology, 2Theiss Research, 3Chemical and Biomolecular Engineering Department,University of Maryland

Capítulos

  • 00:04Título
  • 00:38Cutting Procedure for Warp-direction Specimens, Cut Perpendicular to Roll Axis
  • 03:00Tensile Testing of Unidirectional Laminate Specimens
  • 04:36Beginning an Aging Experiment
  • 05:23Extracting Aged Material Strips for Analysis
  • 06:33Results: Load versus Extension Plots and Failure Stress Distributions
  • 07:27Conclusion

Summary

Traducción Automática

Traducción Automática

The goal of the study was to develop protocols to prepare consistent specimens for accurate mechanical testing of high-strength aramid or ultra-high-molar-mass polyethylene-based flexible unidirectional composite laminate materials and to describe protocols for performing artificial ageing on these materials.

Tags

Unidirectional CompositeFlexible CompositeTensile TestingCutting ProcedureAgeingFiber DirectionSpecimen PreparationSoft Body Armor

Article

Embed

Añadir a la lista de reproducción

Usage Statistics

Videos relacionados

Ultrasonic Welding of Thermoplastic Composite Coupons for Mechanical Characterization of Welded Joints through Single Lap Shear Testing

Testing of Nanoparticle Release from a Composite Containing Nanomaterial Using a Chamber System

Wicking Tests for Unidirectional Fabrics: Measurements of Capillary Parameters to Evaluate Capillary Pressure in Liquid Composite Molding Processes

Magnet Assisted Composite Manufacturing: A Flexible New Technique for Achieving High Consolidation Pressure in Vacuum Bag/Lay-Up Processes

Artificial Thermal Ageing of Polyester Reinforced and Polyvinyl Chloride Coated Technical Fabric

Calibration Procedures for Orthogonal Superposition Rheology

Performing Microscope-Mounted Y-Shaped Cutting Tests

Author Spotlight: Enhancing Fiber Composite Laminate Quality with the Wet Hand Lay-Up/Vacuum Bag Process

Author Spotlight: Development and Application of SERS Flexible Substrates Using Synthesized AgNPs

Fabrication of Glass Fiber-Reinforced Polymer (GFRP) Composite Laminates by Wet Hand Lay-Up/Vacuum Bag (WLVB) Method

Read Article